Search found 16 matches

by BillyG
Sun Feb 05, 2006 9:52 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

What i don't understand also is why the error was happening only at the first attempt after reboot, all the followings were timeouts !
But anyway, i knew i was close and i'm happy not to have quited :)
And as you say, the important is that we succeeded, and we know (more or less ;) why
by BillyG
Sun Feb 05, 2006 9:17 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

hehe i'm unable to answer to that, i agree though, it doesn't make sense, but two clients with the same answer (The shell & Mactftp) would indicate it is not the client, but again, i really don't know ;))
by BillyG
Sun Feb 05, 2006 9:01 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

No indeed the transfer never began, i always had the "code pattern incorrect" and then the timeout. Apparently (and i don't know how, maybe a header or something like that) but the router is able to detect something. Maybe does it act like this when the Flash is empty (i guess so otherwise it wouldn...
by BillyG
Sun Feb 05, 2006 8:42 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

SUCCESS ! Ok, this is stupid but if you don't know it you can try a long time like i did without result (at least for a European GS v4) The fact is that every time i was rebooting the router, the first time i was trying to upload something it told me "code pattern incorrect" and then the following t...
by BillyG
Sun Feb 05, 2006 10:16 am
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

So i'll go on trying... The JTAG trick seems a little bit over my knowledge but i may try in a few days...
Anyway, if i have some news, i'll let you know :)

Thx again Void :)
by BillyG
Sun Feb 05, 2006 9:24 am
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

i've done the nmap it says :

Code: Select all

Starting Nmap 4.00 ( http://www.insecure.org/nmap/ ) at 2006-02-05 16:21 CET
All 1672 scanned ports on 192.168.1.1 are: filtered

Nmap finished: 1 IP address (1 host up) scanned in 62.316 seconds
Why doesn't it say "open", sorry but what means "filtered" ?
by BillyG
Sun Feb 05, 2006 8:51 am
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

I've sent you 2 other files with ping, one is tftp attempt during ping and the other is ping, tftp attempt and ping again... I can't beleive it is dead, it wouldn't ping i suppose but again i'm not an expert ;) i'll go on trying ! i've decided i wouldn't stop untill i succeed (yes i'm optimistic kin...
by BillyG
Sun Feb 05, 2006 8:18 am
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

All right, it's in your ftp server, i've done it twice in case of i don't know ;)
Thx again for your help ;)
by BillyG
Sat Feb 04, 2006 10:45 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

This is very kind of you man :)
I'll do that tomorrow, i mean in a few hours, it is almost 6 in the morning here in Paris, i have to get some sleep ;)
Thx again i'll send you the results during the day, you should have it when you'll wake up i guess :)
by BillyG
Sat Feb 04, 2006 10:11 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

yes i did try in verbose mode, it says the same that : (maybe a clue, each time i plug the router the first answer is this : tftp> put code.bin putting code.bin to 192.168.1.1:code.bin [octet] Error code 4: code pattern incorrect and then when i retry right after : tftp> put code.bin putting code.bi...
by BillyG
Sat Feb 04, 2006 9:51 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

Yes i've done it once with a soft called "mactftp" wich is nothing more than a GUI for the OS X tftp client. There is a field for the password though... Otherwise, with the terminal, i used exactly the same comands as you indicated for Linux (I confirmed it was the same for OS X on the man pages) To...
by BillyG
Sat Feb 04, 2006 8:46 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

ok thx for your advice, so i compiled & installled nmap, and got that : Interesting ports on 192.168.1.1: PORT STATE SERVICE 69/udp open|filtered tftp MAC Address: 00:14:xx:xx: (Cisco-Linksys) Nmap finished: 1 IP address (1 host up) scanned in 17.700 seconds So it looks it is open in UDP... After th...
by BillyG
Sat Feb 04, 2006 6:43 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

OK a little progress for me. Before with the pin 16 & 17 short, the router answered the ping but if i unplugged it, i had to do the short again. Now with the antenna trick, the router is pinging ok always, even if i unplug it. SO i'm happy BUT the problem is still the same, i mean the tftp still mak...
by BillyG
Sat Feb 04, 2006 1:35 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

I don't use any firewall, and personally, I don't think it is a question of plateform, i'm on Mac OS X but i'm using the terminal (Basch) so in fact i think it is exactly the same thing as Linux. Frankly i don't understand why tftp doesn't see the router when it pings correctly :/ But what makes me ...
by BillyG
Thu Feb 02, 2006 3:33 pm
Forum: Programming
Topic: Snort on Linksys WRT54G Wireless Router Help
Replies: 92
Views: 282082

When you say "timeout" problem, do u mean when u try to re-flash the firmware with a designated "good" image build using tftp? Yes that is what i am saying... It answers the ping but i get timeout with whatever tool i use for tftp (and i used several ones)... I thought i was not the only one having...