I can't connect to any servers with Quake3 anymore, nor will XQF ping any servers.
The only thing I've changed is specify a port to open to tcp traffic for Limewire to have access.
That was port 6346 and I did that with the gui in the Start here/System settings folder.
How would I reset the iptables config to default or modify it to grant access to Quake3 again?
Here's my iptables file
Code: Select all
# Firewall configuration written by lokkit # Manual customization of this file is not recommended. # Note: ifup-post will punch the current nameservers through the # firewall; such entries will *not* be listed here. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Lokkit-0-50-INPUT - [0:0] -A INPUT -j RH-Lokkit-0-50-INPUT -A RH-Lokkit-0-50-INPUT -i lo -j ACCEPT -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 18.104.22.168 --sport 53 -d 0/0 -j ACCEPT -A RH-Lokkit-0-50-INPUT -p udp -m udp -s 22.214.171.124 --sport 53 -d 0/0 -j ACCEPT -A RH-Lokkit-0-50-INPUT -p tcp -m tcp --syn -j REJECT -A RH-Lokkit-0-50-INPUT -p udp -m udp -j REJECT COMMIT