hi
i have a wrt54g and this thing is a brick. i ahve tired every recovery method. i have tired tftp. i have tired using satisitic ip and pinged the rotuer and no replies. and have shortened pin 15/16 and no go. i have heard of someone talking about shortening pin 16 and earthing the anteena how do you do this.
DEAD WRT54G
Hi,
after a month I finaly de-brick my wrt54g.
If yours is a V 3.1 (there is a tag under the box) , take a large paper clip and short pins 5 and 6.
In my case, I shorted the pins with the router´s power on and pc power´s off. I don´t know if is necessary to turn off the pc, but I was try with the router´s power off , short pins then router´s power on unsuscessfully.
Hope this help you.
after a month I finaly de-brick my wrt54g.
If yours is a V 3.1 (there is a tag under the box) , take a large paper clip and short pins 5 and 6.
In my case, I shorted the pins with the router´s power on and pc power´s off. I don´t know if is necessary to turn off the pc, but I was try with the router´s power off , short pins then router´s power on unsuscessfully.
Hope this help you.
Try shorting any combination of pins. Drag your metalic object across the pins immediately after power on. Be careful not to put any pressure on the pins though of you can bend them and short them out on each other. If you can't get it to respond with a ping then maybe it's really dead. Just run a wire between your metalic object (jewelers screwdriver, etc) and the metal on the antenna connector to ground to it.