Pod::ParseUtils(3pm)                            Perl Programmers Reference Guide                            Pod::ParseUtils(3pm)



NAME
       Pod::ParseUtils - helpers for POD parsing and conversion

SYNOPSIS
         use Pod::ParseUtils;

         my $list = new Pod::List;
         my $link = Pod::Hyperlink->new('Pod::Parser');

DESCRIPTION
       Pod::ParseUtils contains a few object-oriented helper packages for POD parsing and processing (i.e. in POD formatters and
       translators).

   Pod::List
       Pod::List can be used to hold information about POD lists (written as =over ... =item ... =back) for further processing.
       The following methods are available:

       Pod::List->new()
           Create a new list object. Properties may be specified through a hash reference like this:

             my $list = Pod::List->new({ -start => $., -indent => 4 });

           See the individual methods/properties for details.

       $list->file()
           Without argument, retrieves the file name the list is in. This must have been set before by either specifying -file
           in the new() method or by calling the file() method with a scalar argument.

       $list->start()
           Without argument, retrieves the line number where the list started.  This must have been set before by either
           specifying -start in the new() method or by calling the start() method with a scalar argument.

       $list->indent()
           Without argument, retrieves the indent level of the list as specified in "=over n". This must have been set before by
           either specifying -indent in the new() method or by calling the indent() method with a scalar argument.

       $list->type()
           Without argument, retrieves the list type, which can be an arbitrary value, e.g. "OL", "UL", ... when thinking the
           HTML way.  This must have been set before by either specifying -type in the new() method or by calling the type()
           method with a scalar argument.

       $list->rx()
           Without argument, retrieves a regular expression for simplifying the individual item strings once the list type has
           been determined. Usage: E.g. when converting to HTML, one might strip the leading number in an ordered list as "<OL>"
           already prints numbers itself.  This must have been set before by either specifying -rx in the new() method or by
           calling the rx() method with a scalar argument.

       $list->item()
           Without argument, retrieves the array of the items in this list.  The items may be represented by any scalar.  If an
           argument has been given, it is pushed on the list of items.

       $list->parent()
           Without argument, retrieves information about the parent holding this list, which is represented as an arbitrary
           scalar.  This must have been set before by either specifying -parent in the new() method or by calling the parent()
           method with a scalar argument.

       $list->tag()
           Without argument, retrieves information about the list tag, which can be any scalar.  This must have been set before
           by either specifying -tag in the new() method or by calling the tag() method with a scalar argument.

   Pod::Hyperlink
       Pod::Hyperlink is a class for manipulation of POD hyperlinks. Usage:

         my $link = Pod::Hyperlink->new('alternative text|page/"section in page"');

       The Pod::Hyperlink class is mainly designed to parse the contents of the "L<...>" sequence, providing a simple interface
       for accessing the different parts of a POD hyperlink for further processing. It can also be used to construct hyperlinks.

       Pod::Hyperlink->new()
           The new() method can either be passed a set of key/value pairs or a single scalar value, namely the contents of a
           "L<...>" sequence. An object of the class "Pod::Hyperlink" is returned. The value "undef" indicates a failure, the
           error message is stored in $@.

       $link->parse($string)
           This method can be used to (re)parse a (new) hyperlink, i.e. the contents of a "L<...>" sequence. The result is
           stored in the current object.  Warnings are stored in the warnings property.  E.g. sections like "L<open(2)>" are
           deprecated, as they do not point to Perl documents. "L<DBI::foo(3p)>" is wrong as well, the manpage section can
           simply be dropped.

       $link->markup($string)
           Set/retrieve the textual value of the link. This string contains special markers "P<>" and "Q<>" that should be
           expanded by the translator's interior sequence expansion engine to the formatter-specific code to highlight/activate
           the hyperlink. The details have to be implemented in the translator.

       $link->text()
           This method returns the textual representation of the hyperlink as above, but without markers (read only). Depending
           on the link type this is one of the following alternatives (the + and * denote the portions of the text that are
           marked up):

             +perl+                    L<perl>
             *$|* in +perlvar+         L<perlvar/$|>
             *OPTIONS* in +perldoc+    L<perldoc/"OPTIONS">
             *DESCRIPTION*             L<"DESCRIPTION">

       $link->warning()
           After parsing, this method returns any warnings encountered during the parsing process.

       $link->file()
       $link->line()
           Just simple slots for storing information about the line and the file the link was encountered in. Has to be filled
           in manually.

       $link->page()
           This method sets or returns the POD page this link points to.

       $link->node()
           As above, but the destination node text of the link.

       $link->alttext()
           Sets or returns an alternative text specified in the link.

       $link->type()
           The node type, either "section" or "item". As an unofficial type, there is also "hyperlink", derived from e.g.
           "L<http://perl.com>;"

       $link->link()
           Returns the link as contents of "L<>". Reciprocal to parse().

   Pod::Cache
       Pod::Cache holds information about a set of POD documents, especially the nodes for hyperlinks.  The following methods
       are available:

       Pod::Cache->new()
           Create a new cache object. This object can hold an arbitrary number of POD documents of class Pod::Cache::Item.

       $cache->item()
           Add a new item to the cache. Without arguments, this method returns a list of all cache elements.

       $cache->find_page($name)
           Look for a POD document named $name in the cache. Returns the reference to the corresponding Pod::Cache::Item object
           or undef if not found.

   Pod::Cache::Item
       Pod::Cache::Item holds information about individual POD documents, that can be grouped in a Pod::Cache object.  It is
       intended to hold information about the hyperlink nodes of POD documents.  The following methods are available:

       Pod::Cache::Item->new()
           Create a new object.

       $cacheitem->page()
           Set/retrieve the POD document name (e.g. "Pod::Parser").

       $cacheitem->description()
           Set/retrieve the POD short description as found in the "=head1 NAME" section.

       $cacheitem->path()
           Set/retrieve the POD file storage path.

       $cacheitem->file()
           Set/retrieve the POD file name.

       $cacheitem->nodes()
           Add a node (or a list of nodes) to the document's node list. Note that the order is kept, i.e. start with the first
           node and end with the last.  If no argument is given, the current list of nodes is returned in the same order the
           nodes have been added.  A node can be any scalar, but usually is a pair of node string and unique id for the
           "find_node" method to work correctly.

       $cacheitem->find_node($name)
           Look for a node or index entry named $name in the object.  Returns the unique id of the node (i.e. the second element
           of the array stored in the node array) or undef if not found.

       $cacheitem->idx()
           Add an index entry (or a list of them) to the document's index list. Note that the order is kept, i.e. start with the
           first node and end with the last.  If no argument is given, the current list of index entries is returned in the same
           order the entries have been added.  An index entry can be any scalar, but usually is a pair of string and unique id.

AUTHOR
       Please report bugs using <http://rt.cpan.org>;.

       Marek Rouchal <marekrATcpan.org>, borrowing a lot of things from pod2man and pod2roff as well as other POD processing
       tools by Tom Christiansen, Brad Appleton and Russ Allbery.

SEE ALSO
       pod2man, pod2roff, Pod::Parser, Pod::Checker, pod2html



perl v5.12.4                                               2011-06-01                                       Pod::ParseUtils(3pm)