/* Void Main's man pages */
{ phpMan } else { main(); }
PERLMODINSTALL(1) Perl Programmers Reference Guide PERLMODINSTALL(1)
NAME
perlmodinstall - Installing CPAN Modules
DESCRIPTION
You can think of a module as the fundamental unit of reusable Perl code; see perlmod for details. Whenever anyone
creates a chunk of Perl code that they think will be useful to the world, they register as a Perl developer at
http://www.cpan.org/modules/04pause.html so that they can then upload their code to the CPAN. The CPAN is the
Comprehensive Perl Archive Network and can be accessed at http://www.cpan.org/ , and searched at http://search.cpan.org/
.
This documentation is for people who want to download CPAN modules and install them on their own computer.
PREAMBLE
First, are you sure that the module isn't already on your system? Try "perl -MFoo -e 1". (Replace "Foo" with the name
of the module; for instance, "perl -MCGI::Carp -e 1".
If you don't see an error message, you have the module. (If you do see an error message, it's still possible you have
the module, but that it's not in your path, which you can display with "perl -e "print qq(@INC)"".) For the remainder of
this document, we'll assume that you really honestly truly lack an installed module, but have found it on the CPAN.
So now you have a file ending in .tar.gz (or, less often, .zip). You know there's a tasty module inside. There are four
steps you must now take:
DECOMPRESS the file
UNPACK the file into a directory
BUILD the module (sometimes unnecessary)
INSTALL the module.
Here's how to perform each step for each operating system. This is <not> a substitute for reading the README and INSTALL
files that might have come with your module!
Also note that these instructions are tailored for installing the module into your system's repository of Perl modules,
but you can install modules into any directory you wish. For instance, where I say "perl Makefile.PL", you can
substitute "perl Makefile.PL PREFIX=/my/perl_directory" to install the modules into "/my/perl_directory". Then you can
use the modules from your Perl programs with "use lib "/my/perl_directory/lib/site_perl";" or sometimes just "use
"/my/perl_directory";". If you're on a system that requires superuser/root access to install modules into the
directories you see when you type "perl -e "print qq(@INC)"", you'll want to install them into a local directory (such as
your home directory) and use this approach.
o If you're on a Unix or Unix-like system,
You can use Andreas Koenig's CPAN module ( http://www.cpan.org/modules/by-module/CPAN ) to automate the following
steps, from DECOMPRESS through INSTALL.
A. DECOMPRESS
Decompress the file with "gzip -d yourmodule.tar.gz"
You can get gzip from ftp://prep.ai.mit.edu/pub/gnu/
Or, you can combine this step with the next to save disk space:
gzip -dc yourmodule.tar.gz | tar -xof -
B. UNPACK
Unpack the result with "tar -xof yourmodule.tar"
C. BUILD
Go into the newly-created directory and type:
perl Makefile.PL
make test
or
perl Makefile.PL PREFIX=/my/perl_directory
to install it locally. (Remember that if you do this, you'll have to put "use lib "/my/perl_directory";" near the
top of the program that is to use this module.
D. INSTALL
While still in that directory, type:
make install
Make sure you have the appropriate permissions to install the module in your Perl 5 library directory. Often, you'll
need to be root.
That's all you need to do on Unix systems with dynamic linking. Most Unix systems have dynamic linking. If yours
doesn't, or if for another reason you have a statically-linked perl, and the module requires compilation, you'll need
to build a new Perl binary that includes the module. Again, you'll probably need to be root.
o If you're running ActivePerl (Win95/98/2K/NT/XP, Linux, Solaris)
First, type "ppm" from a shell and see whether ActiveState's PPM repository has your module. If so, you can install
it with "ppm" and you won't have to bother with any of the other steps here. You might be able to use the CPAN
instructions from the "Unix or Linux" section above as well; give it a try. Otherwise, you'll have to follow the
steps below.
A. DECOMPRESS
You can use the shareware Winzip ( http://www.winzip.com ) to decompress and unpack modules.
B. UNPACK
If you used WinZip, this was already done for you.
C. BUILD
You'll need the "nmake" utility, available at
http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe or dmake, available on CPAN.
http://search.cpan.org/dist/dmake/
Does the module require compilation (i.e. does it have files that end in .xs, .c, .h, .y, .cc, .cxx, or .C)? If it
does, life is now officially tough for you, because you have to compile the module yourself (no easy feat on
Windows). You'll need a compiler such as Visual C++. Alternatively, you can download a pre-built PPM package from
ActiveState. http://aspn.activestate.com/ASPN/Downloads/ActivePerl/PPM/
Go into the newly-created directory and type:
perl Makefile.PL
nmake test
D. INSTALL
While still in that directory, type:
nmake install
o If you're using a Macintosh with "Classic" MacOS and MacPerl,
A. DECOMPRESS
First, make sure you have the latest cpan-mac distribution ( http://www.cpan.org/authors/id/CNANDOR/ ), which has
utilities for doing all of the steps. Read the cpan-mac directions carefully and install it. If you choose not to
use cpan-mac for some reason, there are alternatives listed here.
After installing cpan-mac, drop the module archive on the untarzipme droplet, which will decompress and unpack for
you.
Or, you can either use the shareware StuffIt Expander program ( http://my.smithmicro.com/mac/stuffit/ ) or the
freeware MacGzip program ( http://persephone.cps.unizar.es/general/gente/spd/gzip/gzip.html ).
B. UNPACK
If you're using untarzipme or StuffIt, the archive should be extracted now. Or, you can use the freeware suntar or
Tar ( http://hyperarchive.lcs.mit.edu/HyperArchive/Archive/cmp/ ).
C. BUILD
Check the contents of the distribution. Read the module's documentation, looking for reasons why you might have
trouble using it with MacPerl. Look for .xs and .c files, which normally denote that the distribution must be
compiled, and you cannot install it "out of the box." (See "PORTABILITY".)
D. INSTALL
If you are using cpan-mac, just drop the folder on the installme droplet, and use the module.
Or, if you aren't using cpan-mac, do some manual labor.
Make sure the newlines for the modules are in Mac format, not Unix format. If they are not then you might have
decompressed them incorrectly. Check your decompression and unpacking utilities settings to make sure they are
translating text files properly.
As a last resort, you can use the perl one-liner:
perl -i.bak -pe 's/(?:\015)?\012/\015/g' <filenames>
on the source files.
Then move the files (probably just the .pm files, though there may be some additional ones, too; check the module
documentation) to their final destination: This will most likely be in "$ENV{MACPERL}site_lib:" (i.e., "HD:MacPerl
folder:site_lib:"). You can add new paths to the default @INC in the Preferences menu item in the MacPerl
application ("$ENV{MACPERL}site_lib:" is added automagically). Create whatever directory structures are required
(i.e., for "Some::Module", create "$ENV{MACPERL}site_lib:Some:" and put "Module.pm" in that directory).
Then run the following script (or something like it):
#!perl -w
use AutoSplit;
my $dir = "${MACPERL}site_perl";
autosplit("$dir:Some:Module.pm", "$dir:auto", 0, 1, 1);
o If you're on the DJGPP port of DOS,
A. DECOMPRESS
djtarx ( ftp://ftp.delorie.com/pub/djgpp/current/v2/ ) will both uncompress and unpack.
B. UNPACK
See above.
C. BUILD
Go into the newly-created directory and type:
perl Makefile.PL
make test
You will need the packages mentioned in README.dos in the Perl distribution.
D. INSTALL
While still in that directory, type:
make install
You will need the packages mentioned in README.dos in the Perl distribution.
o If you're on OS/2,
Get the EMX development suite and gzip/tar, from either Hobbes ( http://hobbes.nmsu.edu ) or Leo ( http://www.leo.org
), and then follow the instructions for Unix.
o If you're on VMS,
When downloading from CPAN, save your file with a ".tgz" extension instead of ".tar.gz". All other periods in the
filename should be replaced with underscores. For example, "Your-Module-1.33.tar.gz" should be downloaded as
"Your-Module-1_33.tgz".
A. DECOMPRESS
Type
gzip -d Your-Module.tgz
or, for zipped modules, type
unzip Your-Module.zip
Executables for gzip, zip, and VMStar:
http://www.hp.com/go/openvms/freeware/
and their source code:
http://www.fsf.org/order/ftp.html
Note that GNU's gzip/gunzip is not the same as Info-ZIP's zip/unzip package. The former is a simple compression
tool; the latter permits creation of multi-file archives.
B. UNPACK
If you're using VMStar:
VMStar xf Your-Module.tar
Or, if you're fond of VMS command syntax:
tar/extract/verbose Your_Module.tar
C. BUILD
Make sure you have MMS (from Digital) or the freeware MMK ( available from MadGoat at http://www.madgoat.com ). Then
type this to create the DESCRIP.MMS for the module:
perl Makefile.PL
Now you're ready to build:
mms test
Substitute "mmk" for "mms" above if you're using MMK.
D. INSTALL
Type
mms install
Substitute "mmk" for "mms" above if you're using MMK.
o If you're on MVS,
Introduce the .tar.gz file into an HFS as binary; don't translate from ASCII to EBCDIC.
A. DECOMPRESS
Decompress the file with "gzip -d yourmodule.tar.gz"
You can get gzip from http://www.s390.ibm.com/products/oe/bpxqp1.html
B. UNPACK
Unpack the result with
pax -o to=IBM-1047,from=ISO8859-1 -r < yourmodule.tar
The BUILD and INSTALL steps are identical to those for Unix. Some modules generate Makefiles that work better with
GNU make, which is available from http://www.mks.com/s390/gnu/
PORTABILITY
Note that not all modules will work with on all platforms. See perlport for more information on portability issues.
Read the documentation to see if the module will work on your system. There are basically three categories of modules
that will not work "out of the box" with all platforms (with some possibility of overlap):
o Those that should, but don't. These need to be fixed; consider contacting the author and possibly writing a patch.
o Those that need to be compiled, where the target platform doesn't have compilers readily available. (These modules
contain .xs or .c files, usually.) You might be able to find existing binaries on the CPAN or elsewhere, or you
might want to try getting compilers and building it yourself, and then release the binary for other poor souls to
use.
o Those that are targeted at a specific platform. (Such as the Win32:: modules.) If the module is targeted
specifically at a platform other than yours, you're out of luck, most likely.
Check the CPAN Testers if a module should work with your platform but it doesn't behave as you'd expect, or you aren't
sure whether or not a module will work under your platform. If the module you want isn't listed there, you can test it
yourself and let CPAN Testers know, you can join CPAN Testers, or you can request it be tested.
http://testers.cpan.org/
HEY
If you have any suggested changes for this page, let me know. Please don't send me mail asking for help on how to
install your modules. There are too many modules, and too few Orwants, for me to be able to answer or even acknowledge
all your questions. Contact the module author instead, or post to comp.lang.perl.modules, or ask someone familiar with
Perl on your operating system.
AUTHOR
Jon Orwant
orwantATmedita.edu
with invaluable help from Chris Nandor, and valuable help from Brandon Allbery, Charles Bailey, Graham Barr, Dominic
Dunlop, Jarkko Hietaniemi, Ben Holzman, Tom Horsley, Nick Ing-Simmons, Tuomas J. Lukka, Laszlo Molnar, Alan Olsen, Peter
Prymmer, Gurusamy Sarathy, Christoph Spalinger, Dan Sugalski, Larry Virden, and Ilya Zakharevich.
First version July 22, 1998; last revised November 21, 2001.
COPYRIGHT
Copyright (C) 1998, 2002, 2003 Jon Orwant. All Rights Reserved.
Permission is granted to make and distribute verbatim copies of this documentation provided the copyright notice and this
permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this documentation under the conditions for verbatim
copying, provided also that they are marked clearly as modified versions, that the authors' names and title are unchanged
(though subtitles and additional authors' names may be added), and that the entire resulting derived work is distributed
under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this documentation into another language, under the above
conditions for modified versions.
perl v5.12.4 2011-06-01 PERLMODINSTALL(1)
