/* Void Main's man pages */
{ phpMan } else { main(); }
Apache::TestRun(3) User Contributed Perl Documentation Apache::TestRun(3)
NAME
Apache::TestRun - Run the test suite
SYNOPSIS
DESCRIPTION
The "Apache::TestRun" package controls the configuration and running of the test suite.
METHODS
Several methods are sub-classable, if the default behavior should be changed.
"bug_report"
The "bug_report()" method is executed when "t/TEST" was executed with the "-bugreport" option, and "make test" (or
"t/TEST") fail. Normally this is callback which you can use to tell the user how to deal with the problem, e.g.
suggesting to read some document or email some details to someone who can take care of it. By default nothing is
executed.
The "-bugreport" option is needed so this feature won't become annoying to developers themselves. It's automatically
added to the "run_tests" target in Makefile. So if you repeateadly have to test your code, just don't use "make test" but
run "t/TEST" directly. Here is an example of a custom "t/TEST"
My::TestRun->new->run(@ARGV);
package My::TestRun;
use base 'Apache::TestRun';
sub bug_report {
my $self = shift;
print <<EOI;
+--------------------------------------------------------+
| Please file a bug report: http://perl.apache.org/bugs/ |
+--------------------------------------------------------+
EOI
}
"pre_configure"
The "pre_configure()" method is executed before the configuration for "Apache::Test" is generated. So if you need to
adjust the setup before httpd.conf and other files are autogenerated, this is the right place to do so.
For example if you don't want to inherit a LoadModule directive for mod_apreq.so but to make sure that the local version
is used, you can sub-class "Apache::TestRun" and override this method in t/TEST.PL:
package My::TestRun;
use base 'Apache::TestRun';
use Apache::TestConfig;
__PACKAGE__->new->run(@ARGV);
sub pre_configure {
my $self = shift;
# Don't load an installed mod_apreq
Apache::TestConfig::autoconfig_skip_module_add('mod_apreq.c');
$self->SUPER::pre_configure();
}
Notice that the extension is .c, and not .so.
Don't forget to run the super class' c<pre_configure()> method.
"new_test_config"
META: to be completed
Persistent Custom Configuration
When "Apache::Test" is first installed or used, it will save the values of "httpd", "apxs", "port", "user", and "group",
if set, to a configuration file "Apache::TestConfigData". This information will then be used in setting these options
for subsequent uses of "Apache-Test" unless temprorarily overridden, either by setting the appropriate environment
variable ("APACHE_TEST_HTTPD", "APACHE_TEST_APXS", "APACHE_TEST_PORT", "APACHE_TEST_USER", and "APACHE_TEST_GROUP") or by
giving the relevant option ("-httpd", "-apxs", "-port", "-user", and "-group") when the "TEST" script is run.
To avoid either using previous persistent configurations or saving current configurations, set the
"APACHE_TEST_NO_STICKY_PREFERENCES" environment variable to a true value.
Finally it's possible to permanently override the previously saved options by passing "-save".
Here is the algorithm of how and when options are saved for the first time and when they are used. We will use a few
variables to simplify the pseudo-code/pseudo-chart flow:
$config_exists - custom configuration has already been saved, to get this setting run "custom_config_exists()", which
tests whether either "apxs" or "httpd" values are set. It doesn't check for other values, since all we need is "apxs" or
"httpd" to get the test suite running. custom_config_exists() checks in the following order lib/Apache/TestConfigData.pm
(if during Apache-Test build) , ~/.apache-test/Apache/TestConfigData.pm and Apache/TestConfigData.pm in the perl's
libraries.
$config_overriden - that means that we have either "apxs" or "httpd" values provided by user, via env vars or command
line options.
1 Building Apache-Test or modperl-2.0 (or any other project that bundles Apache-Test).
1) perl Apache-Test/Makefile.PL
(for bundles top-level Makefile.PL will run this as well)
if $config_exists
do nothing
else
create lib/Apache/TestConfigData.pm w/ empty config: {}
2) make
3) make test
if $config_exists
if $config_overriden
override saved options (for those that were overriden)
else
use saved options
else
if $config_overriden
save them in lib/Apache/TestConfigData.pm
(which will be installed on 'make install')
else
- run interactive prompt for C<httpd> and optionally for C<apxs>
- save the custom config in lib/Apache/TestConfigData.pm
- restart the currently run program
modperl-2.0 is a special case in (3). it always overrides 'httpd'
and 'apxs' settings. Other settings like 'port', can be used from
the saved config.
4) make install
if $config_exists only in lib/Apache/TestConfigData.pm
it will be installed system-wide
else
nothing changes (since lib/Apache/TestConfigData.pm won't exist)
2 Testing 3rd party modules (after Apache-Test was installed)
Notice that the following situation is quite possible:
cd Apache-Test
perl Makefile.PL && make install
so that Apache-Test was installed but no custom configuration saved (since its "make test" wasn't run). In which case
the interactive configuration should kick in (unless config options were passed) and in any case saved once
configured.
$custom_config_path - perl's Apache/TestConfigData.pm (at the same location as Apache/TestConfig.pm) if that area is
writable by that user (e.g. perl's lib is not owned by 'root'). If not, in ~/.apache-test/Apache/TestConfigData.pm.
1) perl Apache-Test/Makefile.PL
2) make
3) make test
if $config_exists
if $config_overriden
override saved options (for those that were overriden)
else
use saved options
else
if $config_overriden
save them in $custom_config_path
else
- run interactive prompt for C<httpd> and optionally for C<apxs>
- save the custom config in $custom_config_path
- restart the currently run program
4) make install
Saving Custom Configuration Options
If you want to override the existing custom configurations options to "Apache::TestConfigData", use the "-save" flag when
running "TEST".
If you are running "Apache::Test" as a user who does not have permission to alter the system "Apache::TestConfigData",
you can place your own private configuration file TestConfigData.pm under "$ENV{HOME}/.apache-test/Apache/", which
"Apache::Test" will use, if present. An example of such a configuration file is
# file $ENV{HOME}/.apache-test/Apache/TestConfigData.pm
package Apache::TestConfigData;
use strict;
use warnings;
use vars qw($vars);
$vars = {
'group' => 'me',
'user' => 'myself',
'port' => '8529',
'httpd' => '/usr/local/apache/bin/httpd',
};
1;
perl v5.12.0 2008-02-25 Apache::TestRun(3)
