/* Void Main's man pages */
{ phpMan } else { main(); }
CHAT(8) CHAT(8)
NAME
chat - Automated conversational script with a modem
SYNOPSIS
chat [ options ] script
DESCRIPTION
The chat program defines a conversational exchange between the computer and the modem. Its primary purpose is to estab-
lish the connection between the Point-to-Point Protocol Daemon (pppd) and the remote's pppd process.
OPTIONS
-f <chat file>
Read the chat script from the chat file. The use of this option is mutually exclusive with the chat script parame-
ters. The user must have read access to the file. Multiple lines are permitted in the file. Space or horizontal
tab characters should be used to separate the strings.
-t <timeout>
Set the timeout for the expected string to be received. If the string is not received within the time limit then
the reply string is not sent. An alternate reply may be sent or the script will fail if there is no alternate
reply string. A failed script will cause the chat program to terminate with a non-zero error code.
-r <report file>
Set the file for output of the report strings. If you use the keyword REPORT, the resulting strings are written to
this file. If this option is not used and you still use REPORT keywords, the stderr file is used for the report
strings.
-e Start with the echo option turned on. Echoing may also be turned on or off at specific points in the chat script
by using the ECHO keyword. When echoing is enabled, all output from the modem is echoed to stderr.
-E Enables environment variable substituion within chat scripts using the standard $xxx syntax.
-v Request that the chat script be executed in a verbose mode. The chat program will then log the execution state of
the chat script as well as all text received from the modem and the output strings sent to the modem. The default
is to log through the SYSLOG; the logging method may be altered with the -S and -s flags.
-V Request that the chat script be executed in a stderr verbose mode. The chat program will then log all text
received from the modem and the output strings sent to the modem to the stderr device. This device is usually the
local console at the station running the chat or pppd program.
-s Use stderr. All log messages from '-v' and all error messages will be sent to stderr.
-S Do not use the SYSLOG. By default, error messages are sent to the SYSLOG. The use of -S will prevent both log
messages from '-v' and error messages from being sent to the SYSLOG.
-T <phone number>
Pass in an arbitary string, usually a phone number, that will be substituted for the \T substitution metacharacter
in a send string.
-U <phone number 2>
Pass in a second string, usually a phone number, that will be substituted for the \U substitution metacharacter in
a send string. This is useful when dialing an ISDN terminal adapter that requires two numbers.
script If the script is not specified in a file with the -f option then the script is included as parameters to the chat
program.
CHAT SCRIPT
The chat script defines the communications.
A script consists of one or more "expect-send" pairs of strings, separated by spaces, with an optional "subexpect-sub-
send" string pair, separated by a dash as in the following example:
ogin:-BREAK-ogin: ppp ssword: hello2u2
This line indicates that the chat program should expect the string "ogin:". If it fails to receive a login prompt within
the time interval allotted, it is to send a break sequence to the remote and then expect the string "ogin:". If the first
"ogin:" is received then the break sequence is not generated.
Once it received the login prompt the chat program will send the string ppp and then expect the prompt "ssword:". When it
receives the prompt for the password, it will send the password hello2u2.
A carriage return is normally sent following the reply string. It is not expected in the "expect" string unless it is
specifically requested by using the \r character sequence.
The expect sequence should contain only what is needed to identify the string. Since it is normally stored on a disk
file, it should not contain variable information. It is generally not acceptable to look for time strings, network iden-
tification strings, or other variable pieces of data as an expect string.
To help correct for characters which may be corrupted during the initial sequence, look for the string "ogin:" rather
than "login:". It is possible that the leading "l" character may be received in error and you may never find the string
even though it was sent by the system. For this reason, scripts look for "ogin:" rather than "login:" and "ssword:"
rather than "password:".
A very simple script might look like this:
ogin: ppp ssword: hello2u2
In other words, expect ....ogin:, send ppp, expect ...ssword:, send hello2u2.
In actual practice, simple scripts are rare. At the vary least, you should include sub-expect sequences should the origi-
nal string not be received. For example, consider the following script:
ogin:--ogin: ppp ssword: hello2u2
This would be a better script than the simple one used earlier. This would look for the same login: prompt, however, if
one was not received, a single return sequence is sent and then it will look for login: again. Should line noise obscure
the first login prompt then sending the empty line will usually generate a login prompt again.
COMMENTS
Comments can be embedded in the chat script. A comment is a line which starts with the # (hash) character in column 1.
Such comment lines are just ignored by the chat program. If a '#' character is to be expected as the first character of
the expect sequence, you should quote the expect string. If you want to wait for a prompt that starts with a # (hash)
character, you would have to write something like this:
# Now wait for the prompt and send logout string
'# ' logout
SENDING DATA FROM A FILE
If the string to send starts with an at sign (@), the rest of the string is taken to be the name of a file to read to get
the string to send. If the last character of the data read is a newline, it is removed. The file can be a named pipe
(or fifo) instead of a regular file. This provides a way for chat to communicate with another program, for example, a
program to prompt the user and receive a password typed in.
ABORT STRINGS
Many modems will report the status of the call as a string. These strings may be CONNECTED or NO CARRIER or BUSY. It is
often desirable to terminate the script should the modem fail to connect to the remote. The difficulty is that a script
would not know exactly which modem string it may receive. On one attempt, it may receive BUSY while the next time it may
receive NO CARRIER.
These "abort" strings may be specified in the script using the ABORT sequence. It is written in the script as in the fol-
lowing example:
ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK ATDT5551212 CONNECT
This sequence will expect nothing; and then send the string ATZ. The expected response to this is the string OK. When it
receives OK, the string ATDT5551212 to dial the telephone. The expected string is CONNECT. If the string CONNECT is
received the remainder of the script is executed. However, should the modem find a busy telephone, it will send the
string BUSY. This will cause the string to match the abort character sequence. The script will then fail because it found
a match to the abort string. If it received the string NO CARRIER, it will abort for the same reason. Either string may
be received. Either string will terminate the chat script.
CLR_ABORT STRINGS
This sequence allows for clearing previously set ABORT strings. ABORT strings are kept in an array of a pre-determined
size (at compilation time); CLR_ABORT will reclaim the space for cleared entries so that new strings can use that space.
SAY STRINGS
The SAY directive allows the script to send strings to the user at the terminal via standard error. If chat is being run
by pppd, and pppd is running as a daemon (detached from its controlling terminal), standard error will normally be redi-
rected to the file /var/log/ppp/connect-errors.
SAY strings must be enclosed in single or double quotes. If carriage return and line feed are needed in the string to be
output, you must explicitely add them to your string.
The SAY strings could be used to give progress messages in sections of the script where you want to have 'ECHO OFF' but
still let the user know what is happening. An example is:
ABORT BUSY
ECHO OFF
SAY "Dialling your ISP...\n"
'' ATDT5551212
TIMEOUT 120
SAY "Waiting up to 2 minutes for connection ... "
CONNECT ''
SAY "Connected, now logging in ...0
ogin: account
ssword: pass
$ SAY "Logged in OK ...0 etc ...
This sequence will only present the SAY strings to the user and all the details of the script will remain hidden. For
example, if the above script works, the user will see:
Dialling your ISP...
Waiting up to 2 minutes for connection ... Connected, now logging in ...
Logged in OK ...
REPORT STRINGS
A report string is similar to the ABORT string. The difference is that the strings, and all characters to the next con-
trol character such as a carriage return, are written to the report file.
The report strings may be used to isolate the transmission rate of the modem's connect string and return the value to the
chat user. The analysis of the report string logic occurs in conjunction with the other string processing such as looking
for the expect string. The use of the same string for a report and abort sequence is probably not very useful, however,
it is possible.
The report strings to no change the completion code of the program.
These "report" strings may be specified in the script using the REPORT sequence. It is written in the script as in the
following example:
REPORT CONNECT ABORT BUSY '' ATDT5551212 CONNECT '' ogin: account
This sequence will expect nothing; and then send the string ATDT5551212 to dial the telephone. The expected string is
CONNECT. If the string CONNECT is received the remainder of the script is executed. In addition the program will write to
the expect-file the string "CONNECT" plus any characters which follow it such as the connection rate.
CLR_REPORT STRINGS
This sequence allows for clearing previously set REPORT strings. REPORT strings are kept in an array of a pre-determined
size (at compilation time); CLR_REPORT will reclaim the space for cleared entries so that new strings can use that space.
ECHO
The echo options controls whether the output from the modem is echoed to stderr. This option may be set with the -e
option, but it can also be controlled by the ECHO keyword. The "expect-send" pair ECHO ON enables echoing, and ECHO OFF
disables it. With this keyword you can select which parts of the conversation should be visible. For instance, with the
following script:
ABORT 'BUSY'
ABORT 'NO CARRIER'
OK\r\n ATD1234567
\r\n \c
ECHO ON
CONNECT \c
ogin: account
all output resulting from modem configuration and dialing is not visible, but starting with the CONNECT (or BUSY) mes-
sage, everything will be echoed.
HANGUP
The HANGUP options control whether a modem hangup should be considered as an error or not. This option is useful in
scripts for dialling systems which will hang up and call your system back. The HANGUP options can be ON or OFF.
When HANGUP is set OFF and the modem hangs up (e.g., after the first stage of logging in to a callback system), chat will
continue running the script (e.g., waiting for the incoming call and second stage login prompt). As soon as the incoming
call is connected, you should use the HANGUP ON directive to reinstall normal hang up signal behavior. Here is an (sim-
ple) example script:
ABORT 'BUSY'
OK\r\n ATD1234567
\r\n \c
CONNECT \c
'Callback login:' call_back_ID
HANGUP OFF
ABORT "Bad Login"
'Callback Password:' Call_back_password
TIMEOUT 120
CONNECT \c
HANGUP ON
ABORT "NO CARRIER"
ogin:--BREAK--ogin: real_account
etc ...
TIMEOUT
The initial timeout value is 45 seconds. This may be changed using the -t parameter.
To change the timeout value for the next expect string, the following example may be used:
ATZ OK ATDT5551212 CONNECT TIMEOUT 10 ogin:--ogin: TIMEOUT 5 assword: hello2u2
This will change the timeout to 10 seconds when it expects the login: prompt. The timeout is then changed to 5 seconds
when it looks for the password prompt.
The timeout, once changed, remains in effect until it is changed again.
SENDING EOT
The special reply string of EOT indicates that the chat program should send an EOT character to the remote. This is nor-
mally the End-of-file character sequence. A return character is not sent following the EOT. The EOT sequence may be
embedded into the send string using the sequence ^D.
GENERATING BREAK
The special reply string of BREAK will cause a break condition to be sent. The break is a special signal on the transmit-
ter. The normal processing on the receiver is to change the transmission rate. It may be used to cycle through the
available transmission rates on the remote until you are able to receive a valid login prompt. The break sequence may be
embedded into the send string using the \K sequence.
ESCAPE SEQUENCES
The expect and reply strings may contain escape sequences. All of the sequences are legal in the reply string. Many are
legal in the expect. Those which are not valid in the expect sequence are so indicated.
'' Expects or sends a null string. If you send a null string then it will still send the return character. This
sequence may either be a pair of apostrophe or quote characters.
\b represents a backspace character.
\c Suppresses the newline at the end of the reply string. This is the only method to send a string without a trailing
return character. It must be at the end of the send string. For example, the sequence hello\c will simply send the
characters h, e, l, l, o. (not valid in expect.)
\d Delay for one second. The program uses sleep(1) which will delay to a maximum of one second. (not valid in
expect.)
\K Insert a BREAK (not valid in expect.)
\n Send a newline or linefeed character.
\N Send a null character. The same sequence may be represented by \0. (not valid in expect.)
\p Pause for a fraction of a second. The delay is 1/10th of a second. (not valid in expect.)
\q Suppress writing the string to the SYSLOG file. The string ?????? is written to the log in its place. (not valid
in expect.)
\r Send or expect a carriage return.
\s Represents a space character in the string. This may be used when it is not desirable to quote the strings which
contains spaces. The sequence 'HI TIM' and HI\sTIM are the same.
\t Send or expect a tab character.
\T Send the phone number string as specified with the -T option (not valid in expect.)
\U Send the phone number 2 string as specified with the -U option (not valid in expect.)
\\ Send or expect a backslash character.
\ddd Collapse the octal digits (ddd) into a single ASCII character and send that character. (some characters are not
valid in expect.)
^C Substitute the sequence with the control character represented by C. For example, the character DC1 (17) is shown
as ^Q. (some characters are not valid in expect.)
ENVIRONMENT VARIABLES
Environment variables are available within chat scripts, if the -E option was specified in the command line. The
metacharacter $ is used to introduce the name of the environment variable to substitute. If the substition fails, because
the requested environment variable is not set, nothing is replaced for the variable.
TERMINATION CODES
The chat program will terminate with the following completion codes.
0 The normal termination of the program. This indicates that the script was executed without error to the normal
conclusion.
1 One or more of the parameters are invalid or an expect string was too large for the internal buffers. This indi-
cates that the program as not properly executed.
2 An error occurred during the execution of the program. This may be due to a read or write operation failing for
some reason or chat receiving a signal such as SIGINT.
3 A timeout event occurred when there was an expect string without having a "-subsend" string. This may mean that
you did not program the script correctly for the condition or that some unexpected event has occurred and the
expected string could not be found.
4 The first string marked as an ABORT condition occurred.
5 The second string marked as an ABORT condition occurred.
6 The third string marked as an ABORT condition occurred.
7 The fourth string marked as an ABORT condition occurred.
... The other termination codes are also strings marked as an ABORT condition.
Using the termination code, it is possible to determine which event terminated the script. It is possible to decide if
the string "BUSY" was received from the modem as opposed to "NO DIAL TONE". While the first event may be retried, the
second will probably have little chance of succeeding during a retry.
SEE ALSO
Additional information about chat scripts may be found with UUCP documentation. The chat script was taken from the ideas
proposed by the scripts used by the uucico program.
uucico(1), uucp(1)
COPYRIGHT
The chat program is in public domain. This is not the GNU public license. If it breaks then you get to keep both pieces.
Chat Version 1.22 22 May 1999 CHAT(8)
