phpMan

/* Void Main's man pages */

{ phpMan } else { main(); }

CSPLIT(1P) POSIX Programmer's Manual CSPLIT(1P)

PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (con-
sult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on
Linux.

NAME
csplit - split files based on context

SYNOPSIS
csplit [-ks][-f prefix][-n number] file arg1 ...argn

DESCRIPTION
The csplit utility shall read the file named by the file operand, write all or part of that file into other files as
directed by the arg operands, and write the sizes of the files.

OPTIONS
The csplit utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax
Guidelines.

The following options shall be supported:

-f prefix
Name the created files prefix 00, prefix 01, ..., prefixn. The default is xx00 ... xx n. If the prefix argument
would create a filename exceeding {NAME_MAX} bytes, an error shall result, csplit shall exit with a diagnostic
message, and no files shall be created.

-k Leave previously created files intact. By default, csplit shall remove created files if an error occurs.

-n number
Use number decimal digits to form filenames for the file pieces. The default shall be 2.

-s Suppress the output of file size messages.

OPERANDS
The following operands shall be supported:

file The pathname of a text file to be split. If file is '-', the standard input shall be used.

The operands arg1 ... argn can be a combination of the following:

/rexp/[offset]

A file shall be created using the content of the lines from the current line up to, but not including, the line
that results from the evaluation of the regular expression with offset, if any, applied. The regular expression
rexp shall follow the rules for basic regular expressions described in the Base Definitions volume of
IEEE Std 1003.1-2001, Section 9.3, Basic Regular Expressions. The application shall use the sequence "\/" to
specify a slash character within the rexp. The optional offset shall be a positive or negative integer value rep-
resenting a number of lines. A positive integer value can be preceded by '+' . If the selection of lines from an
offset expression of this type would create a file with zero lines, or one with greater than the number of lines
left in the input file, the results are unspecified. After the section is created, the current line shall be set
to the line that results from the evaluation of the regular expression with any offset applied. If the current
line is the first line in the file and a regular expression operation has not yet been performed, the pattern
match of rexp shall be applied from the current line to the end of the file. Otherwise, the pattern match of rexp
shall be applied from the line following the current line to the end of the file.

%rexp%[offset]

Equivalent to /rexp/[offset], except that no file shall be created for the selected section of the input file. The
application shall use the sequence "\%" to specify a percent-sign character within the rexp.

line_no
Create a file from the current line up to (but not including) the line number line_no. Lines in the file shall be
numbered starting at one. The current line becomes line_no.

{num} Repeat operand. This operand can follow any of the operands described previously. If it follows a rexp type oper-
and, that operand shall be applied num more times. If it follows a line_no operand, the file shall be split every
line_no lines, num times, from that point.

An error shall be reported if an operand does not reference a line between the current position and the end of the file.

STDIN
See the INPUT FILES section.

INPUT FILES
The input file shall be a text file.

ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of csplit:

LANG Provide a default value for the internationalization variables that are unset or null. (See the Base Definitions
volume of IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables for the precedence of international-
ization variables used to determine the values of locale categories.)

LC_ALL If set to a non-empty string value, override the values of all the other internationalization variables.

LC_COLLATE

Determine the locale for the behavior of ranges, equivalence classes, and multi-character collating elements
within regular expressions.

LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-
byte as opposed to multi-byte characters in arguments and input files) and the behavior of character classes
within regular expressions.

LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diagnostic messages written to stan-
dard error.

NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES .

ASYNCHRONOUS EVENTS
If the -k option is specified, created files shall be retained. Otherwise, the default action occurs.

STDOUT
Unless the -s option is used, the standard output shall consist of one line per file created, with a format as follows:

"%d\n", <file size in bytes>

STDERR
The standard error shall be used only for diagnostic messages.

OUTPUT FILES
The output files shall contain portions of the original input file; otherwise, unchanged.

EXTENDED DESCRIPTION
None.

EXIT STATUS
The following exit values shall be returned:

0 Successful completion.

>0 An error occurred.

CONSEQUENCES OF ERRORS
By default, created files shall be removed if an error occurs. When the -k option is specified, created files shall not
be removed if an error occurs.

The following sections are informative.

APPLICATION USAGE
None.

EXAMPLES
1. This example creates four files, cobol00 ... cobol03:

csplit -f cobol file '/procedure division/' /par5./ /par16./

After editing the split files, they can be recombined as follows:

cat cobol0[0-3] > file

Note that this example overwrites the original file.

2. This example would split the file after the first 99 lines, and every 100 lines thereafter, up to 9999 lines; this is
because lines in the file are numbered from 1 rather than zero, for historical reasons:

csplit -k file 100 {99}

3. Assuming that prog.c follows the C-language coding convention of ending routines with a '}' at the beginning of the
line, this example creates a file containing each separate C routine (up to 21) in prog.c:

csplit -k prog.c '%main(%' '/^}/+1' {20}

RATIONALE
The -n option was added to extend the range of filenames that could be handled.

Consideration was given to adding a -a flag to use the alphabetic filename generation used by the historical split util-
ity, but the functionality added by the -n option was deemed to make alphabetic naming unnecessary.

FUTURE DIRECTIONS
None.