/* Void Main's man pages */
{ phpMan } else { main(); }
CVS(1) CVS(1)
NAME
cvs - Concurrent Versions System
SYNOPSIS
cvs [ cvs_options ]
cvs_command [ command_options ] [ command_args ]
NOTE
This manpage is a summary of some of the features of cvs. It is auto-generated from an appendix of the CVS manual. For
more in-depth documentation, please consult the Cederqvist manual (via the info CVS command or otherwise, as described in
the SEE ALSO section of this manpage). Cross-references in this man page refer to nodes in the same.
CVS commands
Guide to CVS commands
This appendix describes the overall structure of cvs commands, and describes some commands in detail (others are
described elsewhere; for a quick reference to cvs commands, see node `Invoking CVS' in the CVS manual).
Structure
Overall structure of CVS commands
The overall format of all cvs commands is:
cvs [ cvs_options ] cvs_command [ command_options ] [ command_args ]
cvs
The name of the cvs program.
cvs_options
Some options that affect all sub-commands of cvs. These are described below.
cvs_command
One of several different sub-commands. Some of the commands have aliases that can be used instead; those aliases are
noted in the reference manual for that command. There are only two situations where you may omit cvs_command: cvs -H
elicits a list of available commands, and cvs -v displays version information on cvs itself.
command_options
Options that are specific for the command.
command_args
Arguments to the commands.
There is unfortunately some confusion between cvs_options and command_options. When given as a cvs_option, some
options only affect some of the commands. When given as a command_option it may have a different meaning, and be
accepted by more commands. In other words, do not take the above categorization too seriously. Look at the documenta-
tion instead.
Exit status
CVS's exit status
cvs can indicate to the calling environment whether it succeeded or failed by setting its exit status. The exact way of
testing the exit status will vary from one operating system to another. For example in a unix shell script the $? vari-
able will be 0 if the last command returned a successful exit status, or greater than 0 if the exit status indicated
failure.
If cvs is successful, it returns a successful status; if there is an error, it prints an error message and returns a
failure status. The one exception to this is the cvs diff command. It will return a successful status if it found no
differences, or a failure status if there were differences or if there was an error. Because this behavior provides no
good way to detect errors, in the future it is possible that cvs diff will be changed to behave like the other cvs com-
mands.
~/.cvsrc
Default options and the ~/.cvsrc file
There are some command_options that are used so often that you might have set up an alias or some other means to make
sure you always specify that option. One example (the one that drove the implementation of the .cvsrc support, actually)
is that many people find the default output of the diff command to be very hard to read, and that either context diffs or
unidiffs are much easier to understand.
The ~/.cvsrc file is a way that you can add default options to cvs_commands within cvs, instead of relying on aliases or
other shell scripts.
The format of the ~/.cvsrc file is simple. The file is searched for a line that begins with the same name as the
cvs_command being executed. If a match is found, then the remainder of the line is split up (at whitespace characters)
into separate options and added to the command arguments before any options from the command line.
If a command has two names (e.g., checkout and co), the official name, not necessarily the one used on the command line,
will be used to match against the file. So if this is the contents of the user's ~/.cvsrc file:
log -N
diff -uN
rdiff -u
update -Pd
checkout -P
release -d
the command cvs checkout foo would have the -P option added to the arguments, as well as cvs co foo.
With the example file above, the output from cvs diff foobar will be in unidiff format. cvs diff -c foobar will provide
context diffs, as usual. Getting "old" format diffs would be slightly more complicated, because diff doesn't have an
option to specify use of the "old" format, so you would need cvs -f diff foobar.
In place of the command name you can use cvs to specify global options (see node `Global options' in the CVS manual).
For example the following line in .cvsrc
cvs -z6
causes cvs to use compression level 6.
Global options
The available cvs_options (that are given to the left of cvs_command) are:
--allow-root=rootdir
Specify legal cvsroot directory. See `Password authentication server' in the CVS manual.
-a
Authenticate all communication between the client and the server. Only has an effect on the cvs client. As of this
writing, this is only implemented when using a GSSAPI connection (see node `GSSAPI authenticated' in the CVS manual).
Authentication prevents certain sorts of attacks involving hijacking the active tcp connection. Enabling authentica-
tion does not enable encryption.
-b bindir
In cvs 1.9.18 and older, this specified that rcs programs are in the bindir directory. Current versions of cvs do not
run rcs programs; for compatibility this option is accepted, but it does nothing.
-T tempdir
Use tempdir as the directory where temporary files are located. Overrides the setting of the $TMPDIR environment vari-
able and any precompiled directory. This parameter should be specified as an absolute pathname. (When running
client/server, -T affects only the local process; specifying -T for the client has no effect on the server and vice
versa.)
-d cvs_root_directory
Use cvs_root_directory as the root directory pathname of the repository. Overrides the setting of the $CVSROOT envi-
ronment variable. See `Repository' in the CVS manual.
-e editor
Use editor to enter revision log information. Overrides the setting of the $CVSEDITOR and $EDITOR environment vari-
ables. For more information, see `Committing your changes' in the CVS manual.
-f
Do not read the ~/.cvsrc file. This option is most often used because of the non-orthogonality of the cvs option set.
For example, the cvs log option -N (turn off display of tag names) does not have a corresponding option to turn the
display on. So if you have -N in the ~/.cvsrc entry for log, you may need to use -f to show the tag names.
-H
--help
Display usage information about the specified cvs_command (but do not actually execute the command). If you don't
specify a command name, cvs -H displays overall help for cvs, including a list of other help options.
-n
Do not change any files. Attempt to execute the cvs_command, but only to issue reports; do not remove, update, or
merge any existing files, or create any new files.
Note that cvs will not necessarily produce exactly the same output as without -n. In some cases the output will be the
same, but in other cases cvs will skip some of the processing that would have been required to produce the exact same
output.
-Q
Cause the command to be really quiet; the command will only generate output for serious problems.
-q
Cause the command to be somewhat quiet; informational messages, such as reports of recursion through subdirectories,
are suppressed.
-r
Make new working files read-only. Same effect as if the $CVSREAD environment variable is set (see node `Environment
variables' in the CVS manual). The default is to make working files writable, unless watches are on (see node
`Watches' in the CVS manual).
-s variable=value
Set a user variable (see node `Variables' in the CVS manual).
-t
Trace program execution; display messages showing the steps of cvs activity. Particularly useful with -n to explore
the potential impact of an unfamiliar command.
-v
--version
Display version and copyright information for cvs.
-w
Make new working files read-write. Overrides the setting of the $CVSREAD environment variable. Files are created
read-write by default, unless $CVSREAD is set or -r is given.
-x
Encrypt all communication between the client and the server. Only has an effect on the cvs client. As of this writ-
ing, this is only implemented when using a GSSAPI connection (see node `GSSAPI authenticated' in the CVS manual) or a
Kerberos connection (see node `Kerberos authenticated' in the CVS manual). Enabling encryption implies that message
traffic is also authenticated. Encryption support is not available by default; it must be enabled using a special con-
figure option, --enable-encryption, when you build cvs.
-z gzip-level
Set the compression level. Valid levels are 1 (high speed, low compression) to 9 (low speed, high compression), or 0
to disable compression (the default). Only has an effect on the cvs client.
Common options
Common command options
This section describes the command_options that are available across several cvs commands. These options are always
given to the right of cvs_command. Not all commands support all of these options; each option is only supported for com-
mands where it makes sense. However, when a command has one of these options you can almost always count on the same
behavior of the option as in other commands. (Other command options, which are listed with the individual commands, may
have different behavior from one cvs command to the other).
The history command is an exception; it supports many options that conflict even with these standard options.
-D date_spec
Use the most recent revision no later than date_spec. date_spec is a single argument, a date description specifying a
date in the past.
The specification is sticky when you use it to make a private copy of a source file; that is, when you get a working
file using -D, cvs records the date you specified, so that further updates in the same directory will use the same date
(for more information on sticky tags/dates, see node `Sticky tags' in the CVS manual).
-D is available with the annotate, checkout, diff, export, history, rdiff, rtag, and update commands. (The history
command uses this option in a slightly different way; see node `history options' in the CVS manual).
A wide variety of date formats are supported by cvs. The most standard ones are ISO8601 (from the International Stan-
dards Organization) and the Internet e-mail standard (specified in RFC822 as amended by RFC1123).
ISO8601 dates have many variants but a few examples are:
1972-09-24
1972-09-24 20:05
There are a lot more ISO8601 date formats, and cvs accepts many of them, but you probably don't want to hear the whole
long story :-).
In addition to the dates allowed in Internet e-mail itself, cvs also allows some of the fields to be omitted. For
example:
24 Sep 1972 20:05
24 Sep
The date is interpreted as being in the local timezone, unless a specific timezone is specified.
These two date formats are preferred. However, cvs currently accepts a wide variety of other date formats. They are
intentionally not documented here in any detail, and future versions of cvs might not accept all of them.
One such format is month/day/year. This may confuse people who are accustomed to having the month and day in the other
order; 1/4/96 is January 4, not April 1.
Remember to quote the argument to the -D flag so that your shell doesn't interpret spaces as argument separators. A
command using the -D flag can look like this:
$ cvs diff -D "1 hour ago" cvs.texinfo
-f
When you specify a particular date or tag to cvs commands, they normally ignore files that do not contain the tag (or
did not exist prior to the date) that you specified. Use the -f option if you want files retrieved even when there is
no match for the tag or date. (The most recent revision of the file will be used).
Note that even with -f, a tag that you specify must exist (that is, in some file, not necessary in every file). This
is so that cvs will continue to give an error if you mistype a tag name.
-f is available with these commands: annotate, checkout, export, rdiff, rtag, and update.
WARNING: The commit and remove commands also have a -f option, but it has a different behavior for those commands.
See `commit options' in the CVS manual, and `Removing files' in the CVS manual.
-k kflag
Alter the default processing of keywords. See `Keyword substitution' in the CVS manual, for the meaning of kflag.
Your kflag specification is sticky when you use it to create a private copy of a source file; that is, when you use
this option with the checkout or update commands, cvs associates your selected kflag with the file, and continues to
use it with future update commands on the same file until you specify otherwise.
The -k option is available with the add, checkout, diff, rdiff, import and update commands.
-l
Local; run only in current working directory, rather than recursing through subdirectories.
Available with the following commands: annotate, checkout, commit, diff, edit, editors, export, log, rdiff, remove,
rtag, status, tag, unedit, update, watch, and watchers.
-m message
Use message as log information, instead of invoking an editor.
Available with the following commands: add, commit and import.
-n
Do not run any tag program. (A program can be specified to run in the modules database (see node `modules' in the CVS
manual); this option bypasses it).
This is not the same as the cvs -n program option, which you can specify to the left of a cvs command!
Available with the checkout, export, and rtag commands.
-P
Prune empty directories. See `Removing directories' in the CVS manual.
-p
Pipe the files retrieved from the repository to standard output, rather than writing them in the current directory.
Available with the checkout and update commands.
-R
Process directories recursively. This is on by default.
Available with the following commands: annotate, checkout, commit, diff, edit, editors, export, rdiff, remove, rtag,
status, tag, unedit, update, watch, and watchers.
-r tag
Use the revision specified by the tag argument instead of the default head revision. As well as arbitrary tags defined
with the tag or rtag command, two special tags are always available: HEAD refers to the most recent version available
in the repository, and BASE refers to the revision you last checked out into the current working directory.
The tag specification is sticky when you use this with checkout or update to make your own copy of a file: cvs remem-
bers the tag and continues to use it on future update commands, until you specify otherwise (for more information on
sticky tags/dates, see node `Sticky tags' in the CVS manual).
The tag can be either a symbolic or numeric tag, as described in `Tags' in the CVS manual, or the name of a branch, as
described in `Branching and merging' in the CVS manual. When a command expects a specific revision, the name of a
branch is interpreted as the most recent revision on that branch.
Specifying the -q global option along with the -r command option is often useful, to suppress the warning messages when
the rcs file does not contain the specified tag.
This is not the same as the overall cvs -r option, which you can specify to the left of a cvs command!
-r is available with the annotate, checkout, commit, diff, history, export, rdiff, rtag, and update commands.
-W
Specify file names that should be filtered. You can use this option repeatedly. The spec can be a file name pattern
of the same type that you can specify in the .cvswrappers file. Available with the following commands: import, and
update.
add
Add files and directories to the repository
o Synopsis: add [-k rcs-kflag] [-m message] files...
o Requires: repository, working directory.
o Changes: repository, working directory.
The add command is used to present new files and directories for addition into the cvs repository. When add is used on
a directory, a new directory is created in the repository immediately. When used on a file, only the working directory
is updated. Changes to the repository are not made until the commit command is used on the newly added file.
The add command also resurrects files that have been previously removed. This can be done before or after the commit
command is used to finalize the removal of files. Resurrected files are restored into the working directory at the
time the add command is executed.
add options
These standard options are supported by add (see node `Common options' in the CVS manual, for a complete description of
them):
-k kflag
Process keywords according to kflag. See `Keyword substitution' in the CVS manual. This option is sticky; future
updates of this file in this working directory will use the same kflag. The status command can be viewed to see the
sticky options. For more information on the status command, see node `Invoking CVS' in the CVS manual.
-m message
Use message as the log message, instead of invoking an editor.
add examples
Adding a directory
$ mkdir doc
$ cvs add doc
Directory /path/to/repository/doc added to the repository
Adding a file
$ >TODO
$ cvs add TODO
cvs add: scheduling file `TODO' for addition
cvs add: use 'cvs commit' to add this file permanently
Undoing a remove command
$ rm -f makefile
$ cvs remove makefile
cvs remove: scheduling `makefile' for removal
cvs remove: use 'cvs commit' to remove this file permanently
$ cvs add makefile
U makefile
cvs add: makefile, version 1.2, resurrected
admin
Administration
o Requires: repository, working directory.
o Changes: repository.
o Synonym: rcs
This is the cvs interface to assorted administrative facilities. Some of them have questionable usefulness for cvs but
exist for historical purposes. Some of the questionable options are likely to disappear in the future. This command
does work recursively, so extreme care should be used.
On unix, if there is a group named cvsadmin, only members of that group can run cvs admin (except for the cvs admin -k
command, which can be run by anybody). This group should exist on the server, or any system running the non-
client/server cvs. To disallow cvs admin for all users, create a group with no users in it. On NT, the cvsadmin fea-
ture does not exist and all users can run cvs admin.
admin options
Some of these options have questionable usefulness for cvs but exist for historical purposes. Some even make it impossi-
ble to use cvs until you undo the effect!
-Aoldfile
Might not work together with cvs. Append the access list of oldfile to the access list of the rcs file.
-alogins
Might not work together with cvs. Append the login names appearing in the comma-separated list logins to the access
list of the rcs file.
-b[rev]
Set the default branch to rev. In cvs, you normally do not manipulate default branches; sticky tags (see node `Sticky
tags' in the CVS manual) are a better way to decide which branch you want to work on. There is one reason to run cvs
admin -b: to revert to the vendor's version when using vendor branches (see node `Reverting local changes' in the CVS
manual). There can be no space between -b and its argument.
-cstring
Sets the comment leader to string. The comment leader is not used by current versions of cvs or rcs 5.7. Therefore,
you can almost surely not worry about it. See `Keyword substitution' in the CVS manual.
-e[logins]
Might not work together with cvs. Erase the login names appearing in the comma-separated list logins from the access
list of the RCS file. If logins is omitted, erase the entire access list. There can be no space between -e and its
argument.
-I
Run interactively, even if the standard input is not a terminal. This option does not work with the client/server cvs
and is likely to disappear in a future release of cvs.
-i
Useless with cvs. This creates and initializes a new rcs file, without depositing a revision. With cvs, add files
with the cvs add command (see node `Adding files' in the CVS manual).
-ksubst
Set the default keyword substitution to subst. See `Keyword substitution' in the CVS manual. Giving an explicit -k
option to cvs update, cvs export, or cvs checkout overrides this default.
-l[rev]
Lock the revision with number rev. If a branch is given, lock the latest revision on that branch. If rev is omitted,
lock the latest revision on the default branch. There can be no space between -l and its argument.
This can be used in conjunction with the rcslock.pl script in the contrib directory of the cvs source distribution to
provide reserved checkouts (where only one user can be editing a given file at a time). See the comments in that file
for details (and see the README file in that directory for disclaimers about the unsupported nature of contrib).
According to comments in that file, locking must set to strict (which is the default).
-L
Set locking to strict. Strict locking means that the owner of an RCS file is not exempt from locking for checkin. For
use with cvs, strict locking must be set; see the discussion under the -l option above.
-mrev:msg
Replace the log message of revision rev with msg.
-Nname[:[rev]]
Act like -n, except override any previous assignment of name. For use with magic branches, see `Magic branch numbers'
in the CVS manual.
-nname[:[rev]]
Associate the symbolic name name with the branch or revision rev. It is normally better to use cvs tag or cvs rtag
instead. Delete the symbolic name if both : and rev are omitted; otherwise, print an error message if name is already
associated with another number. If rev is symbolic, it is expanded before association. A rev consisting of a branch
number followed by a . stands for the current latest revision in the branch. A : with an empty rev stands for the cur-
rent latest revision on the default branch, normally the trunk. For example, cvs admin -nname: associates name with
the current latest revision of all the RCS files; this contrasts with cvs admin -nname:$ which associates name with the
revision numbers extracted from keyword strings in the corresponding working files.
-orange
Deletes (outdates) the revisions given by range.
Note that this command can be quite dangerous unless you know exactly what you are doing (for example see the warnings
below about how the rev1:rev2 syntax is confusing).
If you are short on disc this option might help you. But think twice before using it--there is no way short of restor-
ing the latest backup to undo this command! If you delete different revisions than you planned, either due to care-
lessness or (heaven forbid) a cvs bug, there is no opportunity to correct the error before the revisions are deleted.
It probably would be a good idea to experiment on a copy of the repository first.
Specify range in one of the following ways:
rev1::rev2
Collapse all revisions between rev1 and rev2, so that cvs only stores the differences associated with going from rev1
to rev2, not intermediate steps. For example, after -o 1.3::1.5 one can retrieve revision 1.3, revision 1.5, or the
differences to get from 1.3 to 1.5, but not the revision 1.4, or the differences between 1.3 and 1.4. Other exam-
ples: -o 1.3::1.4 and -o 1.3::1.3 have no effect, because there are no intermediate revisions to remove.
::rev
Collapse revisions between the beginning of the branch containing rev and rev itself. The branchpoint and rev are
left intact. For example, -o ::1.3.2.6 deletes revision 1.3.2.1, revision 1.3.2.5, and everything in between, but
leaves 1.3 and 1.3.2.6 intact.
rev::
Collapse revisions between rev and the end of the branch containing rev. Revision rev is left intact but the head
revision is deleted.
rev
Delete the revision rev. For example, -o 1.3 is equivalent to -o 1.2::1.4.
rev1:rev2
Delete the revisions from rev1 to rev2, inclusive, on the same branch. One will not be able to retrieve rev1 or rev2
or any of the revisions in between. For example, the command cvs admin -oR_1_01:R_1_02 . is rarely useful. It means
to delete revisions up to, and including, the tag R_1_02. But beware! If there are files that have not changed
between R_1_02 and R_1_03 the file will have the same numerical revision number assigned to the tags R_1_02 and
R_1_03. So not only will it be impossible to retrieve R_1_02; R_1_03 will also have to be restored from the tapes!
In most cases you want to specify rev1::rev2 instead.
:rev
Delete revisions from the beginning of the branch containing rev up to and including rev.
rev:
Delete revisions from revision rev, including rev itself, to the end of the branch containing rev.
None of the revisions to be deleted may have branches or locks.
If any of the revisions to be deleted have symbolic names, and one specifies one of the :: syntaxes, then cvs will
give an error and not delete any revisions. If you really want to delete both the symbolic names and the revisions,
first delete the symbolic names with cvs tag -d, then run cvs admin -o. If one specifies the non-:: syntaxes, then
cvs will delete the revisions but leave the symbolic names pointing to nonexistent revisions. This behavior is pre-
served for compatibility with previous versions of cvs, but because it isn't very useful, in the future it may change
to be like the :: case.
Due to the way cvs handles branches rev cannot be specified symbolically if it is a branch. See `Magic branch num-
bers' in the CVS manual for an explanation.
Make sure that no-one has checked out a copy of the revision you outdate. Strange things will happen if he starts to
edit it and tries to check it back in. For this reason, this option is not a good way to take back a bogus commit;
commit a new revision undoing the bogus change instead (see node `Merging two revisions' in the CVS manual).
-q
Run quietly; do not print diagnostics.
-sstate[:rev]
Useful with cvs. Set the state attribute of the revision rev to state. If rev is a branch number, assume the latest
revision on that branch. If rev is omitted, assume the latest revision on the default branch. Any identifier is
acceptable for state. A useful set of states is Exp (for experimental), Stab (for stable), and Rel (for released). By
default, the state of a new revision is set to Exp when it is created. The state is visible in the output from cvs log
(see node `log' in the CVS manual), and in the $Log$ and $State$ keywords (see node `Keyword substitution' in the CVS
manual). Note that cvs uses the dead state for its own purposes (see node `Attic' in the CVS manual); to take a file
to or from the dead state use commands like cvs remove and cvs add (see node `Adding and removing' in the CVS manual),
not cvs admin -s.
-t[file]
Useful with cvs. Write descriptive text from the contents of the named file into the RCS file, deleting the existing
text. The file pathname may not begin with -. The descriptive text can be seen in the output from cvs log (see node
`log' in the CVS manual). There can be no space between -t and its argument.
If file is omitted, obtain the text from standard input, terminated by end-of-file or by a line containing . by itself.
Prompt for the text if interaction is possible; see -I.
-t-string
Similar to -tfile. Write descriptive text from the string into the rcs file, deleting the existing text. There can be
no space between -t and its argument.
-U
Set locking to non-strict. Non-strict locking means that the owner of a file need not lock a revision for checkin.
For use with cvs, strict locking must be set; see the discussion under the -l option above.
-u[rev]
See the option -l above, for a discussion of using this option with cvs. Unlock the revision with number rev. If a
branch is given, unlock the latest revision on that branch. If rev is omitted, remove the latest lock held by the
caller. Normally, only the locker of a revision may unlock it; somebody else unlocking a revision breaks the lock.
This causes the original locker to be sent a commit notification (see node `Getting Notified' in the CVS manual).
There can be no space between -u and its argument.
-Vn
In previous versions of cvs, this option meant to write an rcs file which would be acceptable to rcs version n, but it
is now obsolete and specifying it will produce an error.
-xsuffixes
In previous versions of cvs, this was documented as a way of specifying the names of the rcs files. However, cvs has
always required that the rcs files used by cvs end in ,v, so this option has never done anything useful.
annotate
What revision modified each line of a file?
o Synopsis: annotate [options] files...
o Requires: repository.
o Synonym: blame
o Changes: nothing.
For each file in files, print the head revision of the trunk, together with information on the last modification for
each line.
annotate options
These standard options are supported by annotate (see node `Common options' in the CVS manual for a complete description
of them):
-l
Local directory only, no recursion.
-R
Process directories recursively.
-f
Use head revision if tag/date not found.
-F
Annotate binary files.
-r revision
Annotate file as of specified revision/tag.
-D date
Annotate file as of specified date.
annotate example
For example:
$ cvs annotate ssfile
Annotations for ssfile
***************
1.1 (mary 27-Mar-96): ssfile line 1
1.2 (joe 28-Mar-96): ssfile line 2
The file ssfile currently contains two lines. The ssfile line 1 line was checked in by mary on March 27. Then, on March
28, joe added a line ssfile line 2, without modifying the ssfile line 1 line. This report doesn't tell you anything
about lines which have been deleted or replaced; you need to use cvs diff for that (see node `diff' in the CVS manual).
The options to cvs annotate are listed in `Invoking CVS' in the CVS manual, and can be used to select the files and revi-
sions to annotate. The options are described in more detail there and in `Common options' in the CVS manual.
checkout
Check out sources for editing
o Synopsis: checkout [options] modules...
o Requires: repository.
o Changes: working directory.
o Synonyms: co, get
Create or update a working directory containing copies of the source files specified by modules. You must execute
checkout before using most of the other cvs commands, since most of them operate on your working directory.
The modules are either symbolic names for some collection of source directories and files, or paths to directories or
files in the repository. The symbolic names are defined in the modules file. See `modules' in the CVS manual.
Depending on the modules you specify, checkout may recursively create directories and populate them with the appropri-
ate source files. You can then edit these source files at any time (regardless of whether other software developers
are editing their own copies of the sources); update them to include new changes applied by others to the source repos-
itory; or commit your work as a permanent change to the source repository.
Note that checkout is used to create directories. The top-level directory created is always added to the directory
where checkout is invoked, and usually has the same name as the specified module. In the case of a module alias, the
created sub-directory may have a different name, but you can be sure that it will be a sub-directory, and that checkout
will show the relative path leading to each file as it is extracted into your private work area (unless you specify the
-Q global option).
The files created by checkout are created read-write, unless the -r option to cvs (see node `Global options' in the CVS
manual) is specified, the CVSREAD environment variable is specified (see node `Environment variables' in the CVS man-
ual), or a watch is in effect for that file (see node `Watches' in the CVS manual).
Note that running checkout on a directory that was already built by a prior checkout is also permitted. This is simi-
lar to specifying the -d option to the update command in the sense that new directories that have been created in the
repository will appear in your work area. However, checkout takes a module name whereas update takes a directory name.
Also to use checkout this way it must be run from the top level directory (where you originally ran checkout from), so
before you run checkout to update an existing directory, don't forget to change your directory to the top level direc-
tory.
For the output produced by the checkout command, see node `update output' in the CVS manual.
checkout options
These standard options are supported by checkout (see node `Common options' in the CVS manual for a complete description
of them):
-D date
Use the most recent revision no later than date. This option is sticky, and implies -P. See `Sticky tags' in the CVS
manual for more information on sticky tags/dates.
-f
Only useful with the -D date or -r tag flags. If no matching revision is found, retrieve the most recent revision
(instead of ignoring the file).
-k kflag
Process keywords according to kflag. See `Keyword substitution' in the CVS manual. This option is sticky; future
updates of this file in this working directory will use the same kflag. The status command can be viewed to see the
sticky options. See `Invoking CVS' in the CVS manual for more information on the status command.
-l
Local; run only in current working directory.
-n
Do not run any checkout program (as specified with the -o option in the modules file; see node `modules' in the CVS
manual).
-P
Prune empty directories. See `Moving directories' in the CVS manual.
-p
Pipe files to the standard output.
-R
Checkout directories recursively. This option is on by default.
-r tag
Use revision tag. This option is sticky, and implies -P. See `Sticky tags' in the CVS manual, for more information on
sticky tags/dates.
In addition to those, you can use these special command options with checkout:
-A
Reset any sticky tags, dates, or -k options. Does not reset sticky -k options on modified files. See `Sticky tags' in
the CVS manual for more information on sticky tags/dates.
-c
Copy the module file, sorted, to the standard output, instead of creating or modifying any files or directories in your
working directory.
-d dir
Create a directory called dir for the working files, instead of using the module name. In general, using this flag is
equivalent to using mkdir dir; cd dir followed by the checkout command without the -d flag.
There is an important exception, however. It is very convenient when checking out a single item to have the output
appear in a directory that doesn't contain empty intermediate directories. In this case only, cvs tries to ``shorten''
pathnames to avoid those empty directories.
For example, given a module foo that contains the file bar.c, the command cvs co -d dir foo will create directory dir
and place bar.c inside. Similarly, given a module bar which has subdirectory baz wherein there is a file quux.c, the
command cvs co -d dir bar/baz will create directory dir and place quux.c inside.
Using the -N flag will defeat this behavior. Given the same module definitions above, cvs co -N -d dir foo will create
directories dir/foo and place bar.c inside, while cvs co -N -d dir bar/baz will create directories dir/bar/baz and
place quux.c inside.
-j tag
With two -j options, merge changes from the revision specified with the first -j option to the revision specified with
the second j option, into the working directory.
With one -j option, merge changes from the ancestor revision to the revision specified with the -j option, into the
working directory. The ancestor revision is the common ancestor of the revision which the working directory is based
on, and the revision specified in the -j option.
In addition, each -j option can contain an optional date specification which, when used with branches, can limit the
chosen revision to one within a specific date. An optional date is specified by adding a colon (:) to the tag: -jSym-
bolic_Tag:Date_Specifier.
See `Branching and merging' in the CVS manual.
-N
Only useful together with -d dir. With this option, cvs will not ``shorten'' module paths in your working directory
when you check out a single module. See the -d flag for examples and a discussion.
-s
Like -c, but include the status of all modules, and sort it by the status string. See `modules' in the CVS manual, for
info about the -s option that is used inside the modules file to set the module status.
checkout examples
Get a copy of the module tc:
$ cvs checkout tc
Get a copy of the module tc as it looked one day ago:
$ cvs checkout -D yesterday tc
commit
Check files into the repository
o Synopsis: commit [-lRf] [-m 'log_message' | -F file] [-r revision] [files...]
o Requires: working directory, repository.
o Changes: repository.
o Synonym: ci
Use commit when you want to incorporate changes from your working source files into the source repository.
If you don't specify particular files to commit, all of the files in your working current directory are examined. com-
mit is careful to change in the repository only those files that you have really changed. By default (or if you
explicitly specify the -R option), files in subdirectories are also examined and committed if they have changed; you
can use the -l option to limit commit to the current directory only.
commit verifies that the selected files are up to date with the current revisions in the source repository; it will
notify you, and exit without committing, if any of the specified files must be made current first with update (see node
`update' in the CVS manual). commit does not call the update command for you, but rather leaves that for you to do
when the time is right.
When all is well, an editor is invoked to allow you to enter a log message that will be written to one or more logging
programs (see node `modules' in the CVS manual, and see node `loginfo' in the CVS manual) and placed in the rcs file
inside the repository. This log message can be retrieved with the log command; see node `log' in the CVS manual. You
can specify the log message on the command line with the -m message option, and thus avoid the editor invocation, or
use the -F file option to specify that the argument file contains the log message.
commit options
These standard options are supported by commit (see node `Common options' in the CVS manual for a complete description of
them):
-l
Local; run only in current working directory.
-R
Commit directories recursively. This is on by default.
-r revision
Commit to revision. revision must be either a branch, or a revision on the main trunk that is higher than any existing
revision number (see node `Assigning revisions' in the CVS manual). You cannot commit to a specific revision on a
branch.
commit also supports these options:
-F file
Read the log message from file, instead of invoking an editor.
-f
Note that this is not the standard behavior of the -f option as defined in `Common options' in the CVS manual.
Force cvs to commit a new revision even if you haven't made any changes to the file. If the current revision of file
is 1.7, then the following two commands are equivalent:
$ cvs commit -f file
$ cvs commit -r 1.8 file
The -f option disables recursion (i.e., it implies -l). To force cvs to commit a new revision for all files in all
subdirectories, you must use -f -R.
-m message
Use message as the log message, instead of invoking an editor.
commit examples
Committing to a branch
You can commit to a branch revision (one that has an even number of dots) with the -r option. To create a branch revi-
sion, use the -b option of the rtag or tag commands (see node `Branching and merging' in the CVS manual). Then, either
checkout or update can be used to base your sources on the newly created branch. From that point on, all commit changes
made within these working sources will be automatically added to a branch revision, thereby not disturbing main-line
development in any way. For example, if you had to create a patch to the 1.2 version of the product, even though the 2.0
version is already under development, you might do:
$ cvs rtag -b -r FCS1_2 FCS1_2_Patch product_module
$ cvs checkout -r FCS1_2_Patch product_module
$ cd product_module
[[ hack away ]]
$ cvs commit
This works automatically since the -r option is sticky.
Creating the branch after editing
Say you have been working on some extremely experimental software, based on whatever revision you happened to checkout
last week. If others in your group would like to work on this software with you, but without disturbing main-line devel-
opment, you could commit your change to a new branch. Others can then checkout your experimental stuff and utilize the
full benefit of cvs conflict resolution. The scenario might look like:
[[ hacked sources are present ]]
$ cvs tag -b EXPR1
$ cvs update -r EXPR1
$ cvs commit
The update command will make the -r EXPR1 option sticky on all files. Note that your changes to the files will never be
removed by the update command. The commit will automatically commit to the correct branch, because the -r is sticky.
You could also do like this:
[[ hacked sources are present ]]
$ cvs tag -b EXPR1
$ cvs commit -r EXPR1
but then, only those files that were changed by you will have the -r EXPR1 sticky flag. If you hack away, and commit
without specifying the -r EXPR1 flag, some files may accidentally end up on the main trunk.
To work with you on the experimental change, others would simply do
$ cvs checkout -r EXPR1 whatever_module
diff
Show differences between revisions
o Synopsis: diff [-lR] [-k kflag] [format_options] [[-r rev1 | -D date1] [-r rev2 | -D date2]] [files...]
o Requires: working directory, repository.
o Changes: nothing.
The diff command is used to compare different revisions of files. The default action is to compare your working files
with the revisions they were based on, and report any differences that are found.
If any file names are given, only those files are compared. If any directories are given, all files under them will be
compared.
The exit status for diff is different than for other cvs commands; for details see node `Exit status' in the CVS man-
ual.
diff options
These standard options are supported by diff (see node `Common options' in the CVS manual for a complete description of
them):
-D date
Use the most recent revision no later than date. See -r for how this affects the comparison.
-k kflag
Process keywords according to kflag. See `Keyword substitution' in the CVS manual.
-l
Local; run only in current working directory.
-R
Examine directories recursively. This option is on by default.
-r tag
Compare with revision tag. Zero, one or two -r options can be present. With no -r option, the working file will be
compared with the revision it was based on. With one -r, that revision will be compared to your current working file.
With two -r options those two revisions will be compared (and your working file will not affect the outcome in any
way).
One or both -r options can be replaced by a -D date option, described above.
The following options specify the format of the output. They have the same meaning as in GNU diff. Most options have
two equivalent names, one of which is a single letter preceded by -, and the other of which is a long name preceded by
--.
-lines
Show lines (an integer) lines of context. This option does not specify an output format by itself; it has no effect
unless it is combined with -c or -u. This option is obsolete. For proper operation, patch typically needs at least
two lines of context.
-a
Treat all files as text and compare them line-by-line, even if they do not seem to be text.
-b
Ignore trailing white space and consider all other sequences of one or more white space characters to be equivalent.
-B
Ignore changes that just insert or delete blank lines.
--binary
Read and write data in binary mode.
--brief
Report only whether the files differ, not the details of the differences.
-c
Use the context output format.
-C lines
--context[=lines]
Use the context output format, showing lines (an integer) lines of context, or three if lines is not given. For proper
operation, patch typically needs at least two lines of context.
--changed-group-format=format
Use format to output a line group containing differing lines from both files in if-then-else format. See `Line group
formats' in the CVS manual.
-d
Change the algorithm to perhaps find a smaller set of changes. This makes diff slower (sometimes much slower).
-e
--ed
Make output that is a valid ed script.
--expand-tabs
Expand tabs to spaces in the output, to preserve the alignment of tabs in the input files.
-f
Make output that looks vaguely like an ed script but has changes in the order they appear in the file.
-F regexp
In context and unified format, for each hunk of differences, show some of the last preceding line that matches regexp.
--forward-ed
Make output that looks vaguely like an ed script but has changes in the order they appear in the file.
-H
Use heuristics to speed handling of large files that have numerous scattered small changes.
--horizon-lines=lines
Do not discard the last lines lines of the common prefix and the first lines lines of the common suffix.
-i
Ignore changes in case; consider upper- and lower-case letters equivalent.
-I regexp
Ignore changes that just insert or delete lines that match regexp.
--ifdef=name
Make merged if-then-else output using name.
--ignore-all-space
Ignore white space when comparing lines.
--ignore-blank-lines
Ignore changes that just insert or delete blank lines.
--ignore-case
Ignore changes in case; consider upper- and lower-case to be the same.
--ignore-matching-lines=regexp
Ignore changes that just insert or delete lines that match regexp.
--ignore-space-change
Ignore trailing white space and consider all other sequences of one or more white space characters to be equivalent.
--initial-tab
Output a tab rather than a space before the text of a line in normal or context format. This causes the alignment of
tabs in the line to look normal.
-L label
Use label instead of the file name in the context format and unified format headers.
--label=label
Use label instead of the file name in the context format and unified format headers.
--left-column
Print only the left column of two common lines in side by side format.
--line-format=format
Use format to output all input lines in if-then-else format. See `Line formats' in the CVS manual.
--minimal
Change the algorithm to perhaps find a smaller set of changes. This makes diff slower (sometimes much slower).
-n
Output RCS-format diffs; like -f except that each command specifies the number of lines affected.
-N
--new-file
In directory comparison, if a file is found in only one directory, treat it as present but empty in the other direc-
tory.
--new-group-format=format
Use format to output a group of lines taken from just the second file in if-then-else format. See `Line group formats'
in the CVS manual.
--new-line-format=format
Use format to output a line taken from just the second file in if-then-else format. See `Line formats' in the CVS man-
ual.
--old-group-format=format
Use format to output a group of lines taken from just the first file in if-then-else format. See `Line group formats'
in the CVS manual.
--old-line-format=format
Use format to output a line taken from just the first file in if-then-else format. See `Line formats' in the CVS man-
ual.
-p
Show which C function each change is in.
--rcs
Output RCS-format diffs; like -f except that each command specifies the number of lines affected.
--report-identical-files
-s
Report when two files are the same.
--show-c-function
Show which C function each change is in.
--show-function-line=regexp
In context and unified format, for each hunk of differences, show some of the last preceding line that matches regexp.
--side-by-side
Use the side by side output format.
--speed-large-files
Use heuristics to speed handling of large files that have numerous scattered small changes.
--suppress-common-lines
Do not print common lines in side by side format.
-t
Expand tabs to spaces in the output, to preserve the alignment of tabs in the input files.
-T
Output a tab rather than a space before the text of a line in normal or context format. This causes the alignment of
tabs in the line to look normal.
--text
Treat all files as text and compare them line-by-line, even if they do not appear to be text.
-u
Use the unified output format.
--unchanged-group-format=format
Use format to output a group of common lines taken from both files in if-then-else format. see node `Line group for-
mats' in the CVS manual.
--unchanged-line-format=format
Use format to output a line common to both files in if-then-else format. see node `Line formats' in the CVS manual.
-U lines
--unified[=lines]
Use the unified output format, showing lines (an integer) lines of context, or three if lines is not given. For proper
operation, patch typically needs at least two lines of context.
-w
Ignore white space when comparing lines.
-W columns
--width=columns
Use an output width of columns in side by side format.
-y
Use the side by side output format.
Line group formats
Line group formats let you specify formats suitable for many applications that allow if-then-else input, including pro-
gramming languages and text formatting languages. A line group format specifies the output format for a contiguous group
of similar lines.
For example, the following command compares the TeX file myfile with the original version from the repository, and out-
puts a merged file in which old regions are surrounded by \begin{em}-\end{em} lines, and new regions are surrounded by
\begin{bf}-\end{bf} lines.
cvs diff \
--old-group-format='\begin{em}
%<\end{em}
' \
--new-group-format='\begin{bf}
%>\end{bf}
' \
myfile
The following command is equivalent to the above example, but it is a little more verbose, because it spells out the
default line group formats.
cvs diff \
--old-group-format='\begin{em}
%<\end{em}
' \
--new-group-format='\begin{bf}
%>\end{bf}
' \
--unchanged-group-format='%=' \
--changed-group-format='\begin{em}
%<\end{em}
\begin{bf}
%>\end{bf}
' \
myfile
Here is a more advanced example, which outputs a diff listing with headers containing line numbers in a ``plain English''
style.
cvs diff \
--unchanged-group-format='' \
--old-group-format='-------- %dn line%(n=1?:s) deleted at %df:
%<' \
--new-group-format='-------- %dN line%(N=1?:s) added after %de:
%>' \
--changed-group-format='-------- %dn line%(n=1?:s) changed at %df:
%<-------- to:
%>' \
myfile
To specify a line group format, use one of the options listed below. You can specify up to four line group formats, one
for each kind of line group. You should quote format, because it typically contains shell metacharacters.
--old-group-format=format
These line groups are hunks containing only lines from the first file. The default old group format is the same as the
changed group format if it is specified; otherwise it is a format that outputs the line group as-is.
--new-group-format=format
These line groups are hunks containing only lines from the second file. The default new group format is same as the
changed group format if it is specified; otherwise it is a format that outputs the line group as-is.
--changed-group-format=format
These line groups are hunks containing lines from both files. The default changed group format is the concatenation of
the old and new group formats.
--unchanged-group-format=format
These line groups contain lines common to both files. The default unchanged group format is a format that outputs the
line group as-is.
In a line group format, ordinary characters represent themselves; conversion specifications start with % and have one
of the following forms.
%<
stands for the lines from the first file, including the trailing newline. Each line is formatted according to the old
line format (see node `Line formats' in the CVS manual).
%>
stands for the lines from the second file, including the trailing newline. Each line is formatted according to the new
line format.
%=
stands for the lines common to both files, including the trailing newline. Each line is formatted according to the
unchanged line format.
%%
stands for %.
%c'C'
where C is a single character, stands for C. C may not be a backslash or an apostrophe. For example, %c':' stands for
a colon, even inside the then-part of an if-then-else format, which a colon would normally terminate.
%c'\O'
where O is a string of 1, 2, or 3 octal digits, stands for the character with octal code O. For example, %c'\0' stands
for a null character.
Fn
where F is a printf conversion specification and n is one of the following letters, stands for n's value formatted with
F.
e
The line number of the line just before the group in the old file.
f
The line number of the first line in the group in the old file; equals e + 1.
l
The line number of the last line in the group in the old file.
m
The line number of the line just after the group in the old file; equals l + 1.
n
The number of lines in the group in the old file; equals l - f + 1.
E, F, L, M, N
Likewise, for lines in the new file.
The printf conversion specification can be %d, %o, %x, or %X, specifying decimal, octal, lower case hexadecimal, or
upper case hexadecimal output respectively. After the % the following options can appear in sequence: a - specifying
left-justification; an integer specifying the minimum field width; and a period followed by an optional integer spec-
ifying the minimum number of digits. For example, %5dN prints the number of new lines in the group in a field of
width 5 characters, using the printf format "%5d".
(A=B?T:E)
If A equals B then T else E. A and B are each either a decimal constant or a single letter interpreted as above. This
format spec is equivalent to T if A's value equals B's; otherwise it is equivalent to E.
For example, %(N=0?no:%dN) line%(N=1?:s) is equivalent to no lines if N (the number of lines in the group in the new
file) is 0, to 1 line if N is 1, and to %dN lines otherwise.
Line formats
Line formats control how each line taken from an input file is output as part of a line group in if-then-else format.
For example, the following command outputs text with a one-column change indicator to the left of the text. The first
column of output is - for deleted lines, | for added lines, and a space for unchanged lines. The formats contain newline
characters where newlines are desired on output.
cvs diff \
--old-line-format='-%l
' \
--new-line-format='|%l
' \
--unchanged-line-format=' %l
' \
myfile
To specify a line format, use one of the following options. You should quote format, since it often contains shell
metacharacters.
--old-line-format=format
formats lines just from the first file.
--new-line-format=format
formats lines just from the second file.
--unchanged-line-format=format
formats lines common to both files.
--line-format=format
formats all lines; in effect, it sets all three above options simultaneously.
In a line format, ordinary characters represent themselves; conversion specifications start with % and have one of the
following forms.
%l
stands for the contents of the line, not counting its trailing newline (if any). This format ignores whether the line
is incomplete.
%L
stands for the contents of the line, including its trailing newline (if any). If a line is incomplete, this format
preserves its incompleteness.
%%
stands for %.
%c'C'
where C is a single character, stands for C. C may not be a backslash or an apostrophe. For example, %c':' stands for
a colon.
%c'\O'
where O is a string of 1, 2, or 3 octal digits, stands for the character with octal code O. For example, %c'\0' stands
for a null character.
Fn
where F is a printf conversion specification, stands for the line number formatted with F. For example, %.5dn prints
the line number using the printf format "%.5d". see node `Line group formats' in the CVS manual, for more about printf
conversion specifications.
The default line format is %l followed by a newline character.
If the input contains tab characters and it is important that they line up on output, you should ensure that %l or %L
in a line format is just after a tab stop (e.g. by preceding %l or %L with a tab character), or you should use the -t
or --expand-tabs option.
Taken together, the line and line group formats let you specify many different formats. For example, the following
command uses a format similar to diff's normal format. You can tailor this command to get fine control over diff's
output.
cvs diff \
--old-line-format='< %l
' \
--new-line-format='> %l
' \
--old-group-format='%df%(f=l?:,%dl)d%dE
%<' \
--new-group-format='%dea%dF%(F=L?:,%dL)
%>' \
--changed-group-format='%df%(f=l?:,%dl)c%dF%(F=L?:,%dL)
%<--
%>' \
--unchanged-group-format='' \
myfile
diff examples
The following line produces a Unidiff (-u flag) between revision 1.14 and 1.19 of backend.c. Due to the -kk flag no key-
words are substituted, so differences that only depend on keyword substitution are ignored.
$ cvs diff -kk -u -r 1.14 -r 1.19 backend.c
Suppose the experimental branch EXPR1 was based on a set of files tagged RELEASE_1_0. To see what has happened on that
branch, the following can be used:
$ cvs diff -r RELEASE_1_0 -r EXPR1
A command like this can be used to produce a context diff between two releases:
$ cvs diff -c -r RELEASE_1_0 -r RELEASE_1_1 > diffs
If you are maintaining ChangeLogs, a command like the following just before you commit your changes may help you write
the ChangeLog entry. All local modifications that have not yet been committed will be printed.
$ cvs diff -u | less
export
Export sources from CVS, similar to checkout
o Synopsis: export [-flNnR] [-r rev|-D date] [-k subst] [-d dir] module...
o Requires: repository.
o Changes: current directory.
This command is a variant of checkout; use it when you want a copy of the source for module without the cvs administra-
tive directories. For example, you might use export to prepare source for shipment off-site. This command requires
that you specify a date or tag (with -D or -r), so that you can count on reproducing the source you ship to others (and
thus it always prunes empty directories).
One often would like to use -kv with cvs export. This causes any keywords to be expanded such that an import done at
some other site will not lose the keyword revision information. But be aware that doesn't handle an export containing
binary files correctly. Also be aware that after having used -kv, one can no longer use the ident command (which is
part of the rcs suite--see ident(1)) which looks for keyword strings. If you want to be able to use ident you must not
use -kv.
export options
These standard options are supported by export (see node `Common options' in the CVS manual, for a complete description
of them):
-D date
Use the most recent revision no later than date.
-f
If no matching revision is found, retrieve the most recent revision (instead of ignoring the file).
-l
Local; run only in current working directory.
-n
Do not run any checkout program.
-R
Export directories recursively. This is on by default.
-r tag
Use revision tag.
In addition, these options (that are common to checkout and export) are also supported:
-d dir
Create a directory called dir for the working files, instead of using the module name. See `checkout options' in the
CVS manual for complete details on how cvs handles this flag.
-k subst
Set keyword expansion mode (see node `Substitution modes' in the CVS manual).
-N
Only useful together with -d dir. See `checkout options' in the CVS manual for complete details on how cvs handles
this flag.
history
Show status of files and users
o Synopsis: history [-report] [-flags] [-options args] [files...]
o Requires: the file $CVSROOT/CVSROOT/history
o Changes: nothing.
cvs can keep a history file that tracks each use of the checkout, commit, rtag, update, and release commands. You can
use history to display this information in various formats.
Logging must be enabled by creating the file $CVSROOT/CVSROOT/history.
history uses -f, -l, -n, and -p in ways that conflict with the normal use inside cvs (see node `Common options' in the
CVS manual).
history options
Several options (shown above as -report) control what kind of report is generated:
-c
Report on each time commit was used (i.e., each time the repository was modified).
-e
Everything (all record types). Equivalent to specifying -x with all record types. Of course, -e will also include
record types which are added in a future version of cvs; if you are writing a script which can only handle certain
record types, you'll want to specify -x.
-m module
Report on a particular module. (You can meaningfully use -m more than once on the command line.)
-o
Report on checked-out modules. This is the default report type.
-T
Report on all tags.
-x type
Extract a particular set of record types type from the cvs history. The types are indicated by single letters, which
you may specify in combination.
Certain commands have a single record type:
F
release
O
checkout
E
export
T
rtag
One of five record types may result from an update:
C
A merge was necessary but collisions were detected (requiring manual merging).
G
A merge was necessary and it succeeded.
U
A working file was copied from the repository.
P
A working file was patched to match the repository.
W
The working copy of a file was deleted during update (because it was gone from the repository).
One of three record types results from commit:
A
A file was added for the first time.
M
A file was modified.
R
A file was removed.
The options shown as -flags constrain or expand the report without requiring option arguments:
-a
Show data for all users (the default is to show data only for the user executing history).
-l
Show last modification only.
-w
Show only the records for modifications done from the same working directory where history is executing.
The options shown as -options args constrain the report based on an argument:
-b str
Show data back to a record containing the string str in either the module name, the file name, or the repository
path.
-D date
Show data since date. This is slightly different from the normal use of -D date, which selects the newest revision
older than date.
-f file
Show data for a particular file (you can specify several -f options on the same command line). This is equivalent to
specifying the file on the command line.
-n module
Show data for a particular module (you can specify several -n options on the same command line).
-p repository
Show data for a particular source repository (you can specify several -p options on the same command line).
-r rev
Show records referring to revisions since the revision or tag named rev appears in individual rcs files. Each rcs file
is searched for the revision or tag.
-t tag
Show records since tag tag was last added to the history file. This differs from the -r flag above in that it reads
only the history file, not the rcs files, and is much faster.
-u name
Show records for user name.
-z timezone
Show times in the selected records using the specified time zone instead of UTC.
import
Import sources into CVS, using vendor branches
o Synopsis: import [-options] repository vendortag releasetag...
o Requires: Repository, source distribution directory.
o Changes: repository.
Use import to incorporate an entire source distribution from an outside source (e.g., a source vendor) into your source
repository directory. You can use this command both for initial creation of a repository, and for wholesale updates to
the module from the outside source. See `Tracking sources' in the CVS manual for a discussion on this subject.
The repository argument gives a directory name (or a path to a directory) under the cvs root directory for reposito-
ries; if the directory did not exist, import creates it.
When you use import for updates to source that has been modified in your source repository (since a prior import), it
will notify you of any files that conflict in the two branches of development; use checkout -j to reconcile the differ-
ences, as import instructs you to do.
If cvs decides a file should be ignored (see node `cvsignore' in the CVS manual), it does not import it and prints I
followed by the filename (see node `import output' in the CVS manual for a complete description of the output).
If the file $CVSROOT/CVSROOT/cvswrappers exists, any file whose names match the specifications in that file will be
treated as packages and the appropriate filtering will be performed on the file/directory before being imported. See
`Wrappers' in the CVS manual.
The outside source is saved in a first-level branch, by default 1.1.1. Updates are leaves of this branch; for example,
files from the first imported collection of source will be revision 1.1.1.1, then files from the first imported update
will be revision 1.1.1.2, and so on.
At least three arguments are required. repository is needed to identify the collection of source. vendortag is a tag
for the entire branch (e.g., for 1.1.1). You must also specify at least one releasetag to uniquely identify the files
at the leaves created each time you execute import. The releasetag should be new, not previously existing in the
repository file, and uniquely identify the imported release,
Note that import does not change the directory in which you invoke it. In particular, it does not set up that direc-
tory as a cvs working directory; if you want to work with the sources import them first and then check them out into a
different directory (see node `Getting the source' in the CVS manual).
import options
This standard option is supported by import (see node `Common options' in the CVS manual for a complete description):
-m message
Use message as log information, instead of invoking an editor.
There are the following additional special options.
-b branch
See `Multiple vendor branches' in the CVS manual.
-d
Use each file's modification time as the time of import rather than the current time.
-k subst
Indicate the keyword expansion mode desired. This setting will apply to all files created during the import, but not
to any files that previously existed in the repository. See `Substitution modes' in the CVS manual for a list of valid
-k settings.
-I name
Specify file names that should be ignored during import. You can use this option repeatedly. To avoid ignoring any
files at all (even those ignored by default), specify `-I !'.
name can be a file name pattern of the same type that you can specify in the .cvsignore file. See `cvsignore' in the
CVS manual.
-W spec
Specify file names that should be filtered during import. You can use this option repeatedly.
spec can be a file name pattern of the same type that you can specify in the .cvswrappers file. see node `Wrappers' in
the CVS manual.
import output
import keeps you informed of its progress by printing a line for each file, preceded by one character indicating the sta-
tus of the file:
U file
The file already exists in the repository and has not been locally modified; a new revision has been created (if neces-
sary).
N file
The file is a new file which has been added to the repository.
C file
The file already exists in the repository but has been locally modified; you will have to merge the changes.
I file
The file is being ignored (see node `cvsignore' in the CVS manual).
L file
The file is a symbolic link; cvs import ignores symbolic links. People periodically suggest that this behavior should
be changed, but if there is a consensus on what it should be changed to, it doesn't seem to be apparent. (Various
options in the modules file can be used to recreate symbolic links on checkout, update, etc.; see node `modules' in the
CVS manual.)
import examples
See `Tracking sources' in the CVS manual, and `From files' in the CVS manual.
log
Print out log information for files
o Synopsis: log [options] [files...]
o Requires: repository, working directory.
o Changes: nothing.
Display log information for files. log used to call the rcs utility rlog. Although this is no longer true in the cur-
rent sources, this history determines the format of the output and the options, which are not quite in the style of the
other cvs commands.
The output includes the location of the rcs file, the head revision (the latest revision on the trunk), all symbolic
names (tags) and some other things. For each revision, the revision number, the author, the number of lines
added/deleted and the log message are printed. All times are displayed in Coordinated Universal Time (UTC). (Other
parts of cvs print times in the local timezone).
log uses -R in a way that conflicts with the normal use inside cvs (see node `Common options' in the CVS manual).
log options
By default, log prints all information that is available. All other options restrict the output. Note that the revision
selection options (-b, -d, -r, -s, and -w) have no effect, other than possibly causing a search for files in Attic direc-
tories, when used in conjunction with the options that restrict the output to only log header fields (-h, -R, and -t)
unless the -S option is also specified.
-b
Print information about the revisions on the default branch, normally the highest branch on the trunk.
-d dates
Print information about revisions with a checkin date/time in the range given by the semicolon-separated list of dates.
The date formats accepted are those accepted by the -D option to many other cvs commands (see node `Common options' in
the CVS manual). Dates can be combined into ranges as follows:
d1<d2
d2>d1
Select the revisions that were deposited between d1 and d2.
<d
d>
Select all revisions dated d or earlier.
d<
>d
Select all revisions dated d or later.
d
Select the single, latest revision dated d or earlier.
The > or < characters may be followed by = to indicate an inclusive range rather than an exclusive one.
Note that the separator is a semicolon (;).
-h
Print only the name of the rcs file, name of the file in the working directory, head, default branch, access list,
locks, symbolic names, and suffix.
-l
Local; run only in current working directory. (Default is to run recursively).
-N
Do not print the list of tags for this file. This option can be very useful when your site uses a lot of tags, so
rather than "more"'ing over 3 pages of tag information, the log information is presented without tags at all.
-n
Print the list of tags for this file. This option can be very useful when your .cvsrc file has a log -N entry as a way
to get a full list of all of the tags.
-R
Print only the name of the rcs file.
-rrevisions
Print information about revisions given in the comma-separated list revisions of revisions and ranges. The following
table explains the available range formats:
rev1:rev2
Revisions rev1 to rev2 (which must be on the same branch).
rev1::rev2
The same, but excluding rev1.
:rev
::rev
Revisions from the beginning of the branch up to and including rev.
rev:
Revisions starting with rev to the end of the branch containing rev.
rev::
Revisions starting just after rev to the end of the branch containing rev.
branch
An argument that is a branch means all revisions on that branch.
branch1:branch2
branch1::branch2
A range of branches means all revisions on the branches in that range.
branch.
The latest revision in branch.
A bare -r with no revisions means the latest revision on the default branch, normally the trunk. There can be no
space between the -r option and its argument.
-S
Suppress the header if no revisions are selected.
-s states
Print information about revisions whose state attributes match one of the states given in the comma-separated list
states. Individual states may be any text string, though cvs commonly only uses two states, Exp and dead. See `admin
options' in the CVS manual for more information.
-t
Print the same as -h, plus the descriptive text.
-wlogins
Print information about revisions checked in by users with login names appearing in the comma-separated list logins.
If logins is omitted, the user's login is assumed. There can be no space between the -w option and its argument.
log prints the intersection of the revisions selected with the options -d, -s, and -w, intersected with the union of
the revisions selected by -b and -r.
log examples
Contributed examples are gratefully accepted.
rdiff
'patch' format diffs between releases
o rdiff [-flags] [-V vn] [-r t|-D d [-r t2|-D d2]] modules...
o Requires: repository.
o Changes: nothing.
o Synonym: patch
Builds a Larry Wall format patch(1) file between two releases, that can be fed directly into the patch program to bring
an old release up-to-date with the new release. (This is one of the few cvs commands that operates directly from the
repository, and doesn't require a prior checkout.) The diff output is sent to the standard output device.
You can specify (using the standard -r and -D options) any combination of one or two revisions or dates. If only one
revision or date is specified, the patch file reflects differences between that revision or date and the current head
revisions in the rcs file.
Note that if the software release affected is contained in more than one directory, then it may be necessary to specify
the -p option to the patch command when patching the old sources, so that patch is able to find the files that are
located in other directories.
rdiff options
These standard options are supported by rdiff (see node `Common options' in the CVS manual for a complete description of
them):
-D date
Use the most recent revision no later than date.
-f
If no matching revision is found, retrieve the most recent revision (instead of ignoring the file).
-k kflag
Process keywords according to kflag. See `Keyword substitution' in the CVS manual.
-l
Local; don't descend subdirectories.
-R
Examine directories recursively. This option is on by default.
-r tag
Use revision tag.
In addition to the above, these options are available:
-c
Use the context diff format. This is the default format.
-s
Create a summary change report instead of a patch. The summary includes information about files that were changed or
added between the releases. It is sent to the standard output device. This is useful for finding out, for example,
which files have changed between two dates or revisions.
-t
A diff of the top two revisions is sent to the standard output device. This is most useful for seeing what the last
change to a file was.
-u
Use the unidiff format for the context diffs. Remember that old versions of the patch program can't handle the unidiff
format, so if you plan to post this patch to the net you should probably not use -u.
-V vn
Expand keywords according to the rules current in rcs version vn (the expansion format changed with rcs version 5).
Note that this option is no longer accepted. cvs will always expand keywords the way that rcs version 5 does.
rdiff examples
Suppose you receive mail from fooATexample.net asking for an update from release 1.2 to 1.4 of the tc compiler. You have
no such patches on hand, but with cvs that can easily be fixed with a command such as this:
$ cvs rdiff -c -r FOO1_2 -r FOO1_4 tc | \
> Mail -s 'The patches you asked for' fooATexample.net
Suppose you have made release 1.3, and forked a branch called R_1_3fix for bug fixes. R_1_3_1 corresponds to release
1.3.1, which was made some time ago. Now, you want to see how much development has been done on the branch. This com-
mand can be used:
$ cvs patch -s -r R_1_3_1 -r R_1_3fix module-name
cvs rdiff: Diffing module-name
File ChangeLog,v changed from revision 1.52.2.5 to 1.52.2.6
File foo.c,v changed from revision 1.52.2.3 to 1.52.2.4
File bar.h,v changed from revision 1.29.2.1 to 1.2
release
Indicate that a Module is no longer in use
o release [-d] directories...
o Requires: Working directory.
o Changes: Working directory, history log.
This command is meant to safely cancel the effect of cvs checkout. Since cvs doesn't lock files, it isn't strictly
necessary to use this command. You can always simply delete your working directory, if you like; but you risk losing
changes you may have forgotten, and you leave no trace in the cvs history file (see node `history file' in the CVS man-
ual) that you've abandoned your checkout.
Use cvs release to avoid these problems. This command checks that no uncommitted changes are present; that you are
executing it from immediately above a cvs working directory; and that the repository recorded for your files is the
same as the repository defined in the module database.
If all these conditions are true, cvs release leaves a record of its execution (attesting to your intentionally aban-
doning your checkout) in the cvs history log.
release options
The release command supports one command option:
-d
Delete your working copy of the file if the release succeeds. If this flag is not given your files will remain in your
working directory.
WARNING: The release command deletes all directories and files recursively. This has the very serious side-effect
that any directory created inside checked-out sources, and not added to the repository (using the add command; see node
`Adding files' in the CVS manual) will be silently deleted--even if it is non-empty!
release output
Before release releases your sources it will print a one-line message for any file that is not up-to-date.
U file
P file
There exists a newer revision of this file in the repository, and you have not modified your local copy of the file (U
and P mean the same thing).
A file
The file has been added to your private copy of the sources, but has not yet been committed to the repository. If you
delete your copy of the sources this file will be lost.
R file
The file has been removed from your private copy of the sources, but has not yet been removed from the repository,
since you have not yet committed the removal. See `commit' in the CVS manual.
M file
The file is modified in your working directory. There might also be a newer revision inside the repository.
? file
file is in your working directory, but does not correspond to anything in the source repository, and is not in the list
of files for cvs to ignore (see the description of the -I option, and see node `cvsignore' in the CVS manual). If you
remove your working sources, this file will be lost.
release examples
Release the tc directory, and delete your local working copy of the files.
$ cd .. # You must stand immediately above the
# sources when you issue cvs release.
$ cvs release -d tc
You have [0] altered files in this repository.
Are you sure you want to release (and delete) directory `tc': y
$
remove
Remove files from active use
o Synopsis: remove [-flR] [files...]
o Requires: repository, working directory.
o Changes: working directory.
The remove command is used to remove unwanted files from active use. The user normally deletes the files from the
working directory prior to invocation of the remove command. Only the working directory is updated. Changes to the
repository are not made until the commit command is run.
The remove command does not delete files from from the repository. cvs keeps all historical data in the repository so
that it is possible to reconstruct previous states of the projects under revision control.
To undo cvs remove or to resurrect files that were previously removed, see node `add' in the CVS manual.
remove options
These standard options are supported by remove (see node `Common options' in the CVS manual for a complete description of
them):
-l
Local; run only in current working directory. See `Recursive behavior' in the CVS manual.
-R
Process directories recursively. See `Recursive behavior' in the CVS manual.
In addition, these options are also supported:
-f
Note that this is not the standard behavior of the -f option as defined in `Common options' in the CVS manual.
Delete files before removing them.
Entire directory hierarchies are easily removed using -f, but take note that it is not as easy to resurrect directory
hierarchies as it is to remove them.
remove examples
Removing a file
$ cvs remove remove.me
cvs remove: file `remove.me' still in working directory
cvs remove: 1 file exists; remove it first
$ rm -f remove.me
$ cvs remove remove.me
cvs remove: scheduling `remove.me' for removal
cvs remove: use 'cvs commit' to remove this file permanently
$ ls remove.it
remove.it
$ cvs remove -f remove.it
cvs remove: scheduling `remove.it' for removal
cvs remove: use 'cvs commit' to remove this file permanently
Removing entire directories
$ tree -d a
a
|-- CVS
`-- b
`-- CVS
3 directories
$ cvs remove -f a
cvs remove: Removing a
cvs remove: Removing a/b
cvs remove: scheduling `a/b/c' for removal
cvs remove: use 'cvs commit' to remove this file permanently
update
Bring work tree in sync with repository
o update [-ACdflPpR] [-I name] [-j rev [-j rev]] [-k kflag] [-r tag|-D date] [-W spec] files...
o Requires: repository, working directory.
o Changes: working directory.
After you've run checkout to create your private copy of source from the common repository, other developers will con-
tinue changing the central source. From time to time, when it is convenient in your development process, you can use
the update command from within your working directory to reconcile your work with any revisions applied to the source
repository since your last checkout or update.
update options
These standard options are available with update (see node `Common options' in the CVS manual for a complete description
of them):
-D date
Use the most recent revision no later than date. This option is sticky, and implies -P. See `Sticky tags' in the CVS
manual for more information on sticky tags/dates.
-f
Only useful with the -D date or -r tag flags. If no matching revision is found, retrieve the most recent revision
(instead of ignoring the file).
-k kflag
Process keywords according to kflag. See `Keyword substitution' in the CVS manual. This option is sticky; future
updates of this file in this working directory will use the same kflag. The status command can be viewed to see the
sticky options. See `Invoking CVS' in the CVS manual for more information on the status command.
-l
Local; run only in current working directory. See `Recursive behavior' in the CVS manual.
-P
Prune empty directories. See `Moving directories' in the CVS manual.
-p
Pipe files to the standard output.
-R
Update directories recursively (default). See `Recursive behavior' in the CVS manual.
-r rev
Retrieve revision/tag rev. This option is sticky, and implies -P. See `Sticky tags' in the CVS manual, for more
information on sticky tags/dates.
These special options are also available with update.
-A
Reset any sticky tags, dates, or -k options. Does not reset sticky -k options on modified files. See `Sticky tags' in
the CVS manual for more information on sticky tags/dates.
-C
Overwrite locally modified files with clean copies from the repository (the modified file is saved in .#file.revision,
however).
-d
Create any directories that exist in the repository if they're missing from the working directory. Normally, update
acts only on directories and files that were already enrolled in your working directory.
This is useful for updating directories that were created in the repository since the initial checkout; but it has an
unfortunate side effect. If you deliberately avoided certain directories in the repository when you created your work-
ing directory (either through use of a module name or by listing explicitly the files and directories you wanted on the
command line), then updating with -d will create those directories, which may not be what you want.
-I name
Ignore files whose names match name (in your working directory) during the update. You can specify -I more than once
on the command line to specify several files to ignore. Use -I ! to avoid ignoring any files at all. See `cvsignore'
in the CVS manual for other ways to make cvs ignore some files.
-Wspec
Specify file names that should be filtered during update. You can use this option repeatedly.
spec can be a file name pattern of the same type that you can specify in the .cvswrappers file. See `Wrappers' in the
CVS manual.
-jrevision
With two -j options, merge changes from the revision specified with the first -j option to the revision specified with
the second j option, into the working directory.
With one -j option, merge changes from the ancestor revision to the revision specified with the -j option, into the
working directory. The ancestor revision is the common ancestor of the revision which the working directory is based
on, and the revision specified in the -j option.
Note that using a single -j tagname option rather than -j branchname to merge changes from a branch will often not
remove files which were removed on the branch. See `Merging adds and removals' in the CVS manual for more information.
In addition, each -j option can contain an optional date specification which, when used with branches, can limit the
chosen revision to one within a specific date. An optional date is specified by adding a colon (:) to the tag: -jSym-
bolic_Tag:Date_Specifier.
See `Branching and merging' in the CVS manual.
update output
update and checkout keep you informed of their progress by printing a line for each file, preceded by one character indi-
cating the status of the file:
U file
The file was brought up to date with respect to the repository. This is done for any file that exists in the reposi-
tory but not in your working directory, and for files that you haven't changed but are not the most recent versions
available in the repository.
P file
Like U, but the cvs server sends a patch instead of an entire file. This accomplishes the same thing as U using less
bandwidth.
A file
The file has been added to your private copy of the sources, and will be added to the source repository when you run
commit on the file. This is a reminder to you that the file needs to be committed.
R file
The file has been removed from your private copy of the sources, and will be removed from the source repository when
you run commit on the file. This is a reminder to you that the file needs to be committed.
M file
The file is modified in your working directory.
M can indicate one of two states for a file you're working on: either there were no modifications to the same file in
the repository, so that your file remains as you last saw it; or there were modifications in the repository as well as
in your copy, but they were merged successfully, without conflict, in your working directory.
cvs will print some messages if it merges your work, and a backup copy of your working file (as it looked before you
ran update) will be made. The exact name of that file is printed while update runs.
C file
A conflict was detected while trying to merge your changes to file with changes from the source repository. file (the
copy in your working directory) is now the result of attempting to merge the two revisions; an unmodified copy of your
file is also in your working directory, with the name .#file.revision where revision is the revision that your modified
file started from. Resolve the conflict as described in `Conflicts example' in the CVS manual. (Note that some sys-
tems automatically purge files that begin with .# if they have not been accessed for a few days. If you intend to keep
a copy of your original file, it is a very good idea to rename it.) Under vms, the file name starts with __ rather
than .#.
? file
file is in your working directory, but does not correspond to anything in the source repository, and is not in the list
of files for cvs to ignore (see the description of the -I option, and see node `cvsignore' in the CVS manual).
AUTHORS
Dick Grune
Original author of the cvs shell script version posted to comp.sources.unix in the volume6 release of December,
1986. Credited with much of the cvs conflict resolution algorithms.
Brian Berliner
Coder and designer of the cvs program itself in April, 1989, based on the original work done by Dick.
Jeff Polk
Helped Brian with the design of the cvs module and vendor branch support and author of the checkin(1) shell script
(the ancestor of cvs import).
Larry Jones, Derek R. Price, and Mark D. Baushke
Have helped maintain cvs for many years.
And many others too numerous to mention here.
SEE ALSO
The most comprehensive manual for CVS is Version Management with CVS by Per Cederqvist et al. Depending on your system,
you may be able to get it with the info CVS command or it may be available as cvs.pdf (Portable Document Format), cvs.ps
(PostScript), cvs.texinfo (Texinfo source), or cvs.html.
For CVS updates, more information on documentation, software related to CVS, development of CVS, and more, see:
http://cvs.nongnu.org
ci(1), co(1), cvs(5), cvsbug(8), diff(1), grep(1), patch(1), rcs(1), rcsdiff(1), rcsmerge(1), rlog(1).
CVS(1)
