/* Void Main's man pages */
{ phpMan } else { main(); }
dhcpd-options(5) dhcpd-options(5)
NAME
dhcp-options - Dynamic Host Configuration Protocol options
DESCRIPTION
The Dynamic Host Configuration protocol allows the client to receive options from the DHCP server describing the network
configuration and various services that are available on the network. When configuring dhcpd(8) or dhclient(8) ,
options must often be declared. The syntax for declaring options, and the names and formats of the options that can be
declared, are documented here.
REFERENCE: OPTION STATEMENTS
DHCP option statements always start with the option keyword, followed by an option name, followed by option data. The
option names and data formats are described below. It is not necessary to exhaustively specify all DHCP options - only
those options which are needed by clients must be specified.
Option data comes in a variety of formats, as defined below:
The ip-address data type can be entered either as an explicit IP address (e.g., 239.254.197.10) or as a domain name
(e.g., haagen.isc.org). When entering a domain name, be sure that that domain name resolves to a single IP address.
The ip6-address data specifies an IPv6 address, like ::1 or 3ffe:bbbb:aaaa:aaaa::1.
The int32 data type specifies a signed 32-bit integer. The uint32 data type specifies an unsigned 32-bit integer. The
int16 and uint16 data types specify signed and unsigned 16-bit integers. The int8 and uint8 data types specify signed
and unsigned 8-bit integers. Unsigned 8-bit integers are also sometimes referred to as octets.
The text data type specifies an NVT ASCII string, which must be enclosed in double quotes - for example, to specify a
root-path option, the syntax would be
option root-path "10.0.1.4:/var/tmp/rootfs";
The domain-name data type specifies a domain name, which must not be enclosed in double quotes. This data type is not
used for any existing DHCP options. The domain name is stored just as if it were a text option.
The domain-list data type specifies a list of domain names, enclosed in double quotes and separated by commas ("exam-
ple.com", "foo.example.com").
The flag data type specifies a boolean value. Booleans can be either true or false (or on or off, if that makes more
sense to you).
The string data type specifies either an NVT ASCII string enclosed in double quotes, or a series of octets specified in
hexadecimal, separated by colons. For example:
option dhcp-client-identifier "CLIENT-FOO";
or
option dhcp-client-identifier 43:4c:49:45:54:2d:46:4f:4f;
The destination-descriptor describe the IP subnet number and subnet mask of a particular destination using a compact
encoding. This encoding consists of one octet describing the width of the subnet mask, followed by all the significant
octets of the subnet number. The following table contains some examples of how various subnet number/mask combinations
can be encoded:
Subnet number Subnet mask Destination descriptor
0 0 0
10.0.0.0 255.0.0.0 8.10
10.0.0.0 255.255.255.0 24.10.0.0
10.17.0.0 255.255.0.0 16.10.17
10.27.129.0 255.255.255.0 24.10.27.129
10.229.0.128 255.255.255.128 25.10.229.0.128
10.198.122.47 255.255.255.255 32.10.198.122.47
SETTING OPTION VALUES USING EXPRESSIONS
Sometimes it's helpful to be able to set the value of a DHCP option based on some value that the client has sent. To do
this, you can use expression evaluation. The dhcp-eval(5) manual page describes how to write expressions. To assign
the result of an evaluation to an option, define the option as follows:
option my-option = expression ;
For example:
option hostname = binary-to-ascii (16, 8, "-",
substring (hardware, 1, 6));
STANDARD DHCPV4 OPTIONS
The documentation for the various options mentioned below is taken from the latest IETF draft document on DHCP options.
Options not listed below may not yet be implemented, but it is possible to use such options by defining them in the con-
figuration file. Please see the DEFINING NEW OPTIONS heading later in this document for more information.
Some of the options documented here are automatically generated by the DHCP server or by clients, and cannot be config-
ured by the user. The value of such an option can be used in the configuration file of the receiving DHCP protocol agent
(server or client), for example in conditional expressions. However, the value of the option cannot be used in the con-
figuration file of the sending agent, because the value is determined only after the configuration file has been pro-
cessed. In the following documentation, such options will be shown as "not user configurable"
The standard options are:
option all-subnets-local flag;
This option specifies whether or not the client may assume that all subnets of the IP network to which the client is
connected use the same MTU as the subnet of that network to which the client is directly connected. A value of true
indicates that all subnets share the same MTU. A value of false means that the client should assume that some subnets
of the directly connected network may have smaller MTUs.
option arp-cache-timeout uint32;
This option specifies the timeout in seconds for ARP cache entries.
option bcms-controller-address ip-address [, ip-address... ];
This option configures a list of IPv4 addresses for use as Broadcast and Multicast Controller Servers ("BCMS").
option bcms-controller-names domain-list;
This option contains the domain names of local Broadcast and Multicast Controller Servers ("BCMS") controllers which
the client may use.
option bootfile-name text;
This option is used to identify a bootstrap file. If supported by the client, it should have the same effect as the
filename declaration. BOOTP clients are unlikely to support this option. Some DHCP clients will support it, and oth-
ers actually require it.
option boot-size uint16;
This option specifies the length in 512-octet blocks of the default boot image for the client.
option broadcast-address ip-address;
This option specifies the broadcast address in use on the client's subnet. Legal values for broadcast addresses are
specified in section 3.2.1.3 of STD 3 (RFC1122).
option cookie-servers ip-address [, ip-address... ];
The cookie server option specifies a list of RFC 865 cookie servers available to the client. Servers should be listed
in order of preference.
option default-ip-ttl uint8;
This option specifies the default time-to-live that the client should use on outgoing datagrams.
option default-tcp-ttl uint8;
This option specifies the default TTL that the client should use when sending TCP segments. The minimum value is 1.
option default-url string;
The format and meaning of this option is not described in any standards document, but is claimed to be in use by Apple
Computer. It is not known what clients may reasonably do if supplied with this option. Use at your own risk.
option dhcp-client-identifier string;
This option can be used to specify a DHCP client identifier in a host declaration, so that dhcpd can find the host
record by matching against the client identifier.
Please be aware that some DHCP clients, when configured with client identifiers that are ASCII text, will prepend a
zero to the ASCII text. So you may need to write:
option dhcp-client-identifier "\0foo";
rather than:
option dhcp-client-identifier "foo";
option dhcp-lease-time uint32;
This option is used in a client request (DHCPDISCOVER or DHCPREQUEST) to allow the client to request a lease time for
the IP address. In a server reply (DHCPOFFER), a DHCP server uses this option to specify the lease time it is willing
to offer.
This option is not directly user configurable in the server; refer to the max-lease-time and default-lease-time server
options in dhcpd.conf(5).
option dhcp-max-message-size uint16;
This option, when sent by the client, specifies the maximum size of any response that the server sends to the client.
When specified on the server, if the client did not send a dhcp-max-message-size option, the size specified on the
server is used. This works for BOOTP as well as DHCP responses.
option dhcp-message text;
This option is used by a DHCP server to provide an error message to a DHCP client in a DHCPNAK message in the event of
a failure. A client may use this option in a DHCPDECLINE message to indicate why the client declined the offered param-
eters.
This option is not user configurable.
option dhcp-message-type uint8;
This option, sent by both client and server, specifies the type of DHCP message contained in the DHCP packet. Possible
values (taken directly from RFC2132) are:
1 DHCPDISCOVER
2 DHCPOFFER
3 DHCPREQUEST
4 DHCPDECLINE
5 DHCPACK
6 DHCPNAK
7 DHCPRELEASE
8 DHCPINFORM
This option is not user configurable.
option dhcp-option-overload uint8;
This option is used to indicate that the DHCP 'sname' or 'file' fields are being overloaded by using them to carry DHCP
options. A DHCP server inserts this option if the returned parameters will exceed the usual space allotted for options.
If this option is present, the client interprets the specified additional fields after it concludes interpretation of
the standard option fields.
Legal values for this option are:
1 the 'file' field is used to hold options
2 the 'sname' field is used to hold options
3 both fields are used to hold options
This option is not user configurable.
option dhcp-parameter-request-list uint16 [, uint16... ];
This option, when sent by the client, specifies which options the client wishes the server to return. Normally, in
the ISC DHCP client, this is done using the request statement. If this option is not specified by the client, the
DHCP server will normally return every option that is valid in scope and that fits into the reply. When this option
is specified on the server, the server returns the specified options. This can be used to force a client to take
options that it hasn't requested, and it can also be used to tailor the response of the DHCP server for clients that
may need a more limited set of options than those the server would normally return.
option dhcp-rebinding-time uint32;
This option specifies the number of seconds from the time a client gets an address until the client transitions to the
REBINDING state.
This option is user configurable, but it will be ignored if the value is greater than the lease time.
To make DHCPv4+DHCPv6 migration easier in the future, any value configured in this option is also used as a DHCPv6 "T1"
(renew) time.
option dhcp-renewal-time uint32;
This option specifies the number of seconds from the time a client gets an address until the client transitions to the
RENEWING state.
This option is user configurable, but it will be ignored if the value is greater than the rebinding time, or lease
time.
To make DHCPv4+DHCPv6 migration easier in the future, any value configured in this option is also used as a DHCPv6 "T2"
(rebind) time.
option dhcp-requested-address ip-address;
This option is used by the client in a DHCPDISCOVER to request that a particular IP address be assigned.
This option is not user configurable.
option dhcp-server-identifier ip-address;
This option is used in DHCPOFFER and DHCPREQUEST messages, and may optionally be included in the DHCPACK and DHCPNAK
messages. DHCP servers include this option in the DHCPOFFER in order to allow the client to distinguish between lease
offers. DHCP clients use the contents of the 'server identifier' field as the destination address for any DHCP mes-
sages unicast to the DHCP server. DHCP clients also indicate which of several lease offers is being accepted by
including this option in a DHCPREQUEST message.
The value of this option is the IP address of the server.
This option is not directly user configurable. See the server-identifier server option in dhcpd.conf(5).
option domain-name text;
This option specifies the domain name that client should use when resolving hostnames via the Domain Name System.
option domain-name-servers ip-address [, ip-address... ];
The domain-name-servers option specifies a list of Domain Name System (STD 13, RFC 1035) name servers available to the
client. Servers should be listed in order of preference.
option domain-search domain-list;
The domain-search option specifies a 'search list' of Domain Names to be used by the client to locate not-fully-quali-
fied domain names. The difference between this option and historic use of the domain-name option for the same ends is
that this option is encoded in RFC1035 compressed labels on the wire. For example:
option domain-search "example.com", "sales.example.com",
"eng.example.com";
option extensions-path text;
This option specifies the name of a file containing additional options to be interpreted according to the DHCP option
format as specified in RFC2132.
option finger-server ip-address [, ip-address... ];
The Finger server option specifies a list of Finger servers available to the client. Servers should be listed in order
of preference.
option font-servers ip-address [, ip-address... ];
This option specifies a list of X Window System Font servers available to the client. Servers should be listed in order
of preference.
option host-name string;
This option specifies the name of the client. The name may or may not be qualified with the local domain name (it is
preferable to use the domain-name option to specify the domain name). See RFC 1035 for character set restrictions.
This option is only honored by dhclient-script(8) if the hostname for the client machine is not set.
option ieee802-3-encapsulation flag;
This option specifies whether or not the client should use Ethernet Version 2 (RFC 894) or IEEE 802.3 (RFC 1042) encap-
sulation if the interface is an Ethernet. A value of false indicates that the client should use RFC 894 encapsulation.
A value of true means that the client should use RFC 1042 encapsulation.
option ien116-name-servers ip-address [, ip-address... ];
The ien116-name-servers option specifies a list of IEN 116 name servers available to the client. Servers should be
listed in order of preference.
option impress-servers ip-address [, ip-address... ];
The impress-server option specifies a list of Imagen Impress servers available to the client. Servers should be listed
in order of preference.
option interface-mtu uint16;
This option specifies the MTU to use on this interface. The minimum legal value for the MTU is 68.
option ip-forwarding flag;
This option specifies whether the client should configure its IP layer for packet forwarding. A value of false means
disable IP forwarding, and a value of true means enable IP forwarding.
option irc-server ip-address [, ip-address... ];
The IRC server option specifies a list of IRC servers available to the client. Servers should be listed in order of
preference.
option log-servers ip-address [, ip-address... ];
The log-server option specifies a list of MIT-LCS UDP log servers available to the client. Servers should be listed in
order of preference.
option lpr-servers ip-address [, ip-address... ];
The LPR server option specifies a list of RFC 1179 line printer servers available to the client. Servers should be
listed in order of preference.
option mask-supplier flag;
This option specifies whether or not the client should respond to subnet mask requests using ICMP. A value of false
indicates that the client should not respond. A value of true means that the client should respond.
option max-dgram-reassembly uint16;
This option specifies the maximum size datagram that the client should be prepared to reassemble. The minimum legal
value is 576.
option merit-dump text;
This option specifies the path-name of a file to which the client's core image should be dumped in the event the client
crashes. The path is formatted as a character string consisting of characters from the NVT ASCII character set.
option mobile-ip-home-agent ip-address [, ip-address... ];
This option specifies a list of IP addresses indicating mobile IP home agents available to the client. Agents should
be listed in order of preference, although normally there will be only one such agent.
option nds-context string;
The nds-context option specifies the name of the initial Netware Directory Service for an NDS client.
option nds-servers ip-address [, ip-address... ];
The nds-servers option specifies a list of IP addresses of NDS servers.
option nds-tree-name string;
The nds-tree-name option specifies NDS tree name that the NDS client should use.
option netbios-dd-server ip-address [, ip-address... ];
The NetBIOS datagram distribution server (NBDD) option specifies a list of RFC 1001/1002 NBDD servers listed in order
of preference.
option netbios-name-servers ip-address [, ip-address...];
The NetBIOS name server (NBNS) option specifies a list of RFC 1001/1002 NBNS name servers listed in order of prefer-
ence. NetBIOS Name Service is currently more commonly referred to as WINS. WINS servers can be specified using the
netbios-name-servers option.
option netbios-node-type uint8;
The NetBIOS node type option allows NetBIOS over TCP/IP clients which are configurable to be configured as described in
RFC 1001/1002. The value is specified as a single octet which identifies the client type.
Possible node types are:
1 B-node: Broadcast - no WINS
2 P-node: Peer - WINS only
4 M-node: Mixed - broadcast, then WINS
8 H-node: Hybrid - WINS, then broadcast
option netbios-scope string;
The NetBIOS scope option specifies the NetBIOS over TCP/IP scope parameter for the client as specified in RFC
1001/1002. See RFC1001, RFC1002, and RFC1035 for character-set restrictions.
option netinfo-server-address ip-address [, ip-address... ];
The netinfo-server-address option has not been described in any RFC, but has been allocated (and is claimed to be in
use) by Apple Computers. It's hard to say if the above is the correct format, or what clients might be expected to do
if values were configured. Use at your own risk.
option netinfo-server-tag text;
The netinfo-server-tag option has not been described in any RFC, but has been allocated (and is claimed to be in use)
by Apple Computers. It's hard to say if the above is the correct format, or what clients might be expected to do if
values were configured. Use at your own risk.
option nis-domain text;
This option specifies the name of the client's NIS (Sun Network Information Services) domain. The domain is formatted
as a character string consisting of characters from the NVT ASCII character set.
option nis-servers ip-address [, ip-address... ];
This option specifies a list of IP addresses indicating NIS servers available to the client. Servers should be listed
in order of preference.
option nisplus-domain text;
This option specifies the name of the client's NIS+ domain. The domain is formatted as a character string consisting
of characters from the NVT ASCII character set.
option nisplus-servers ip-address [, ip-address... ];
This option specifies a list of IP addresses indicating NIS+ servers available to the client. Servers should be listed
in order of preference.
option nntp-server ip-address [, ip-address... ];
The NNTP server option specifies a list of NNTP servesr available to the client. Servers should be listed in order of
preference.
option non-local-source-routing flag;
This option specifies whether the client should configure its IP layer to allow forwarding of datagrams with non-local
source routes (see Section 3.3.5 of [4] for a discussion of this topic). A value of false means disallow forwarding of
such datagrams, and a value of true means allow forwarding.
option ntp-servers ip-address [, ip-address... ];
This option specifies a list of IP addresses indicating NTP (RFC 1035) servers available to the client. Servers should
be listed in order of preference.
option nwip-domain string;
The name of the NetWare/IP domain that a NetWare/IP client should use.
option nwip-suboptions string;
A sequence of suboptions for NetWare/IP clients - see RFC2242 for details. Normally this option is set by specifying
specific NetWare/IP suboptions - see the NETWARE/IP SUBOPTIONS section for more information.
option path-mtu-aging-timeout uint32;
This option specifies the timeout (in seconds) to use when aging Path MTU values discovered by the mechanism defined in
RFC 1191.
option path-mtu-plateau-table uint16 [, uint16... ];
This option specifies a table of MTU sizes to use when performing Path MTU Discovery as defined in RFC 1191. The table
is formatted as a list of 16-bit unsigned integers, ordered from smallest to largest. The minimum MTU value cannot be
smaller than 68.
option perform-mask-discovery flag;
This option specifies whether or not the client should perform subnet mask discovery using ICMP. A value of false
indicates that the client should not perform mask discovery. A value of true means that the client should perform mask
discovery.
option policy-filter ip-address ip-address
[, ip-address ip-address...];
This option specifies policy filters for non-local source routing. The filters consist of a list of IP addresses and
masks which specify destination/mask pairs with which to filter incoming source routes.
Any source routed datagram whose next-hop address does not match one of the filters should be discarded by the client.
See STD 3 (RFC1122) for further information.
option pop-server ip-address [, ip-address... ];
The POP3 server option specifies a list of POP3 servers available to the client. Servers should be listed in order of
preference.
option resource-location-servers ip-address
[, ip-address...];
This option specifies a list of RFC 887 Resource Location servers available to the client. Servers should be listed in
order of preference.
option root-path text;
This option specifies the path-name that contains the client's root disk. The path is formatted as a character string
consisting of characters from the NVT ASCII character set.
option router-discovery flag;
This option specifies whether or not the client should solicit routers using the Router Discovery mechanism defined in
RFC 1256. A value of false indicates that the client should not perform router discovery. A value of true means that
the client should perform router discovery.
option router-solicitation-address ip-address;
This option specifies the address to which the client should transmit router solicitation requests.
option routers ip-address [, ip-address... ];
The routers option specifies a list of IP addresses for routers on the client's subnet. Routers should be listed in
order of preference.
option slp-directory-agent boolean ip-address [, ip-address... ];
This option specifies two things: the IP addresses of one or more Service Location Protocol Directory Agents, and
whether the use of these addresses is mandatory. If the initial boolean value is true, the SLP agent should just use
the IP addresses given. If the value is false, the SLP agent may additionally do active or passive multicast discov-
ery of SLP agents (see RFC2165 for details).
Please note that in this option and the slp-service-scope option, the term "SLP Agent" is being used to refer to a Ser-
vice Location Protocol agent running on a machine that is being configured using the DHCP protocol.
Also, please be aware that some companies may refer to SLP as NDS. If you have an NDS directory agent whose address
you need to configure, the slp-directory-agent option should work.
option slp-service-scope boolean text;
The Service Location Protocol Service Scope Option specifies two things: a list of service scopes for SLP, and whether
the use of this list is mandatory. If the initial boolean value is true, the SLP agent should only use the list of
scopes provided in this option; otherwise, it may use its own static configuration in preference to the list provided
in this option.
The text string should be a comma-separated list of scopes that the SLP agent should use. It may be omitted, in which
case the SLP Agent will use the aggregated list of scopes of all directory agents known to the SLP agent.
option smtp-server ip-address [, ip-address... ];
The SMTP server option specifies a list of SMTP servers available to the client. Servers should be listed in order of
preference.
option static-routes ip-address ip-address
[, ip-address ip-address...];
This option specifies a list of static routes that the client should install in its routing cache. If multiple routes
to the same destination are specified, they are listed in descending order of priority.
The routes consist of a list of IP address pairs. The first address is the destination address, and the second address
is the router for the destination.
The default route (0.0.0.0) is an illegal destination for a static route. To specify the default route, use the
routers option. Also, please note that this option is not intended for classless IP routing - it does not include a
subnet mask. Since classless IP routing is now the most widely deployed routing standard, this option is virtually
useless, and is not implemented by any of the popular DHCP clients, for example the Microsoft DHCP client.
NOTE to Fedora dhclient users:
dhclient-script interprets trailing 0 octets of the target as indicating the subnet class of the route, so for the fol-
lowing static-routes value:
option static-routes 172.0.0.0 172.16.2.254,
192.168.0.0 192.168.2.254;
dhclient-script will create routes:
172/8 via 172.16.2.254 dev $interface
192.168/16 via 192.168.2.254 dev $interface
option classless-static-routes destination-descriptor ip-address
[, destination-descriptor ip-address...];
This option (see RFC3442) specifies a list of classless static routes that the client should install in its routing
cache.
This option can contain one or more static routes, each of which consists of a destination descriptor and the IP
address of the router that should be used to reach that destination.
Many clients may not implement the Classless Static Routes option. DHCP server administrators should therefore config-
ure their DHCP servers to send both a Router option and a Classless Static Routes option, and should specify the
default router(s) both in the Router option and in the Classless Static Routes option.
If the DHCP server returns both a Classless Static Routes option and a Router option, the DHCP client ignores the
Router option.
option streettalk-directory-assistance-server ip-address
[, ip-address...];
The StreetTalk Directory Assistance (STDA) server option specifies a list of STDA servers available to the client.
Servers should be listed in order of preference.
option streettalk-server ip-address [, ip-address... ];
The StreetTalk server option specifies a list of StreetTalk servers available to the client. Servers should be listed
in order of preference.
option subnet-mask ip-address;
The subnet mask option specifies the client's subnet mask as per RFC 950. If no subnet mask option is provided any-
where in scope, as a last resort dhcpd will use the subnet mask from the subnet declaration for the network on which an
address is being assigned. However, any subnet-mask option declaration that is in scope for the address being assigned
will override the subnet mask specified in the subnet declaration.
option subnet-selection string;
Sent by the client if an address is required in a subnet other than the one that would normally be selected (based on
the relaying address of the connected subnet the request is obtained from). See RFC3011. Note that the option number
used by this server is 118; this has not always been the defined number, and some clients may use a different value.
Use of this option should be regarded as slightly experimental!
This option is not user configurable in the server.
option swap-server ip-address;
This specifies the IP address of the client's swap server.
option tcp-keepalive-garbage flag;
This option specifies whether or not the client should send TCP keepalive messages with an octet of garbage for compat-
ibility with older implementations. A value of false indicates that a garbage octet should not be sent. A value of
true indicates that a garbage octet should be sent.
option tcp-keepalive-interval uint32;
This option specifies the interval (in seconds) that the client TCP should wait before sending a keepalive message on a
TCP connection. The time is specified as a 32-bit unsigned integer. A value of zero indicates that the client should
not generate keepalive messages on connections unless specifically requested by an application.
option tftp-server-name text;
This option is used to identify a TFTP server and, if supported by the client, should have the same effect as the
server-name declaration. BOOTP clients are unlikely to support this option. Some DHCP clients will support it, and
others actually require it.
option time-offset int32;
The time-offset option specifies the offset of the client's subnet in seconds from Coordinated Universal Time (UTC).
option time-servers ip-address [, ip-address... ];
The time-server option specifies a list of RFC 868 time servers available to the client. Servers should be listed in
order of preference.
option trailer-encapsulation flag;
This option specifies whether or not the client should negotiate the use of trailers (RFC 893 [14]) when using the ARP
protocol. A value of false indicates that the client should not attempt to use trailers. A value of true means that
the client should attempt to use trailers.
option uap-servers text;
This option specifies a list of URLs, each pointing to a user authentication service that is capable of processing
authentication requests encapsulated in the User Authentication Protocol (UAP). UAP servers can accept either HTTP 1.1
or SSLv3 connections. If the list includes a URL that does not contain a port component, the normal default port is
assumed (i.e., port 80 for http and port 443 for https). If the list includes a URL that does not contain a path com-
ponent, the path /uap is assumed. If more than one URL is specified in this list, the URLs are separated by spaces.
option user-class string;
This option is used by some DHCP clients as a way for users to specify identifying information to the client. This
can be used in a similar way to the vendor-class-identifier option, but the value of the option is specified by the
user, not the vendor. Most recent DHCP clients have a way in the user interface to specify the value for this identi-
fier, usually as a text string.
option vendor-class-identifier string;
This option is used by some DHCP clients to identify the vendor type and possibly the configuration of a DHCP client.
The information is a string of bytes whose contents are specific to the vendor and are not specified in a standard.
To see what vendor class identifier clients are sending, you can write the following in your DHCP server configuration
file:
set vendor-string = option vendor-class-identifier;
This will result in all entries in the DHCP server lease database file for clients that sent vendor-class-identifier
options having a set statement that looks something like this:
set vendor-string = "SUNW.Ultra-5_10";
The vendor-class-identifier option is normally used by the DHCP server to determine the options that are returned in
the vendor-encapsulated-options option. Please see the VENDOR ENCAPSULATED OPTIONS section later in this manual page
for further information.
option vendor-encapsulated-options string;
The vendor-encapsulated-options option can contain either a single vendor-specific value or one or more vendor-specific
suboptions. This option is not normally specified in the DHCP server configuration file - instead, a vendor class is
defined for each vendor, vendor class suboptions are defined, values for those suboptions are defined, and the DHCP
server makes up a response on that basis.
Some default behaviours for well-known DHCP client vendors (currently, the Microsoft Windows 2000 DHCP client) are con-
figured automatically, but otherwise this must be configured manually - see the VENDOR ENCAPSULATED OPTIONS section
later in this manual page for details.
option vivso string;
The vivso option can contain multiple separate options, one for each 32-bit Enterprise ID. Each Enterprise-ID discrim-
inated option then contains additional options whose format is defined by the vendor who holds that ID. This option is
usually not configured manually, but rather is configured via intervening option definitions. Please also see the VEN-
DOR ENCAPSULATED OPTIONS section later in this manual page for details.
option www-server ip-address [, ip-address... ];
The WWW server option specifies a list of WWW servers available to the client. Servers should be listed in order of
preference.
option x-display-manager ip-address [, ip-address... ];
This option specifies a list of systems that are running the X Window System Display Manager and are available to the
client. Addresses should be listed in order of preference.
RELAY AGENT INFORMATION OPTION
An IETF draft, draft-ietf-dhc-agent-options-11.txt, defines a series of encapsulated options that a relay agent can add
to a DHCP packet when relaying it to the DHCP server. The server can then make address allocation decisions (or what-
ever other decisions it wants) based on these options. The server also returns these options in any replies it sends
through the relay agent, so that the relay agent can use the information in these options for delivery or accounting pur-
poses.
The current draft defines two options. To reference these options in the dhcp server, specify the option space name,
"agent", followed by a period, followed by the option name. It is not normally useful to define values for these
options in the server, although it is permissible. These options are not supported in the client.
option agent.circuit-id string;
The circuit-id suboption encodes an agent-local identifier of the circuit from which a DHCP client-to-server packet was
received. It is intended for use by agents in relaying DHCP responses back to the proper circuit. The format of this
option is currently defined to be vendor-dependent, and will probably remain that way, although the current draft
allows for for the possibility of standardizing the format in the future.
option agent.remote-id string;
The remote-id suboption encodes information about the remote host end of a circuit. Examples of what it might contain
include caller ID information, username information, remote ATM address, cable modem ID, and similar things. In prin-
cipal, the meaning is not well-specified, and it should generally be assumed to be an opaque object that is administra-
tively guaranteed to be unique to a particular remote end of a circuit.
option agent.DOCSIS-device-class uint32;
The DOCSIS-device-class suboption is intended to convey information about the host endpoint, hardware, and software,
that either the host operating system or the DHCP server may not otherwise be aware of (but the relay is able to dis-
tinguish). This is implemented as a 32-bit field (4 octets), each bit representing a flag describing the host in one
of these ways. So far, only bit zero (being the least significant bit) is defined in RFC3256. If this bit is set to
one, the host is considered a CPE Controlled Cable Modem (CCCM). All other bits are reserved.
option agent.link-selection ip-address;
The link-selection suboption is provided by relay agents to inform servers what subnet the client is actually attached
to. This is useful in those cases where the giaddr (where responses must be sent to the relay agent) is not on the
same subnet as the client. When this option is present in a packet from a relay agent, the DHCP server will use its
contents to find a subnet declared in configuration, and from here take one step further backwards to any shared-net-
work the subnet may be defined within...the client may be given any address within that shared network, as normally
appropriate.
THE CLIENT FQDN SUBOPTIONS
The Client FQDN option, currently defined in the Internet Draft draft-ietf-dhc-fqdn-option-00.txt is not a standard yet,
but is in sufficiently wide use already that we have implemented it. Due to the complexity of the option format, we
have implemented it as a suboption space rather than a single option. In general this option should not be configured
by the user - instead it should be used as part of an automatic DNS update system.
option fqdn.no-client-update flag;
When the client sends this, if it is true, it means the client will not attempt to update its A record. When sent by
the server to the client, it means that the client should not update its own A record.
option fqdn.server-update flag;
When the client sends this to the server, it is requesting that the server update its A record. When sent by the
server, it means that the server has updated (or is about to update) the client's A record.
option fqdn.encoded flag;
If true, this indicates that the domain name included in the option is encoded in DNS wire format, rather than as plain
ASCII text. The client normally sets this to false if it doesn't support DNS wire format in the FQDN option. The
server should always send back the same value that the client sent. When this value is set on the configuration side,
it controls the format in which the fqdn.fqdn suboption is encoded.
option fqdn.rcode1 flag;
option fqdn.rcode2 flag;
These options specify the result of the updates of the A and PTR records, respectively, and are only sent by the DHCP
server to the DHCP client. The values of these fields are those defined in the DNS protocol specification.
option fqdn.fqdn text;
Specifies the domain name that the client wishes to use. This can be a fully-qualified domain name, or a single
label. If there is no trailing '.' character in the name, it is not fully-qualified, and the server will generally
update that name in some locally-defined domain.
option fqdn.hostname --never set--;
This option should never be set, but it can be read back using the option and config-option operators in an expression,
in which case it returns the first label in the fqdn.fqdn suboption - for example, if the value of fqdn.fqdn is
"foo.example.com.", then fqdn.hostname will be "foo".
option fqdn.domainname --never set--;
This option should never be set, but it can be read back using the option and config-option operators in an expression,
in which case it returns all labels after the first label in the fqdn.fqdn suboption - for example, if the value of
fqdn.fqdn is "foo.example.com.", then fqdn.hostname will be "example.com.". If this suboption value is not set, it
means that an unqualified name was sent in the fqdn option, or that no fqdn option was sent at all.
If you wish to use any of these suboptions, we strongly recommend that you refer to the Client FQDN option draft (or
standard, when it becomes a standard) - the documentation here is sketchy and incomplete in comparison, and is just
intended for reference by people who already understand the Client FQDN option specification.
THE NETWARE/IP SUBOPTIONS
RFC2242 defines a set of encapsulated options for Novell NetWare/IP clients. To use these options in the dhcp server,
specify the option space name, "nwip", followed by a period, followed by the option name. The following options can be
specified:
option nwip.nsq-broadcast flag;
If true, the client should use the NetWare Nearest Server Query to locate a NetWare/IP server. The behaviour of the
Novell client if this suboption is false, or is not present, is not specified.
option nwip.preferred-dss ip-address [, ip-address... ];
This suboption specifies a list of up to five IP addresses, each of which should be the IP address of a NetWare Domain
SAP/RIP server (DSS).
option nwip.nearest-nwip-server ip-address
[, ip-address...];
This suboption specifies a list of up to five IP addresses, each of which should be the IP address of a Nearest NetWare
IP server.
option nwip.autoretries uint8;
Specifies the number of times that a NetWare/IP client should attempt to communicate with a given DSS server at
startup.
option nwip.autoretry-secs uint8;
Specifies the number of seconds that a Netware/IP client should wait between retries when attempting to establish com-
munications with a DSS server at startup.
option nwip.nwip-1-1 uint8;
If true, the NetWare/IP client should support NetWare/IP version 1.1 compatibility. This is only needed if the client
will be contacting Netware/IP version 1.1 servers.
option nwip.primary-dss ip-address;
Specifies the IP address of the Primary Domain SAP/RIP Service server (DSS) for this NetWare/IP domain. The Net-
Ware/IP administration utility uses this value as Primary DSS server when configuring a secondary DSS server.
STANDARD DHCPV6 OPTIONS
DHCPv6 options differ from DHCPv4 options partially due to using 16-bit code and length tags, but semantically zero-
length options are legal in DHCPv6, and multiple options are treated differently. Whereas in DHCPv4 multiple options
would be concatenated to form one option, in DHCPv6 they are expected to be individual instantiations. Understandably,
many options are not "allowed" to have multiple instances in a packet - normally these are options which are digested by
the DHCP protocol software, and not by users or applications.
option dhcp6.client-id string;
This option specifies the client's DUID identifier. DUIDs are similar but different from DHCPv4 client identifiers -
there are documented duid types:
duid-llt
duid-en
duid-ll
This value should not be configured, but rather is provided by clients and treated as an opaque identifier key blob by
servers.
option dhcp6.server-id string;
This option specifies the server's DUID identifier. One may use this option to configure an opaque binary blob for
your server's identifier.
option dhcp6.ia-na string;
The Identity Association for Non-temporary Addresses (ia-na) carries assigned addresses that are not temporary
addresses for use by the DHCPv6 client. This option is produced by the DHCPv6 server software, and should not be con-
figured.
option dhcp6.ia-ta string;
The Identity Association for Temporary Addresses (ia-ta) carries temporary addresses, which may change upon every
renewal. There is no support for this in the current DHCPv6 software.
option dhcp6.ia-addr string;
The Identity Association Address option is encapsulated inside ia-na or ia-ta options in order to represent addresses
associated with those IA's. These options are manufactured by the software, so should not be configured.
option dhcp6.oro uint16 [ , uint16, ... ];
The Option Request Option ("ORO") is the DHCPv6 equivalent of the parameter-request-list. Clients supply this option
to ask servers to reply with options relevant to their needs and use. This option must not be directly configured, the
request syntax in dhclient.conf (5) should be used instead.
option dhcp6.preference uint8;
The preference option informs a DHCPv6 client which server is 'preferred' for use on a given subnet. This preference
is only applied during the initial stages of configuration - once a client is bound to an IA, it will remain bound to
that IA until it is no longer valid or has expired. This value may be configured on the server, and is digested by the
client software.
option dhcp6.elapsed-time uint16;
The elapsed-time option is constructed by the DHCPv6 client software, and is potentially consumed by intermediaries.
This option should not be configured.
option dhcp6.relay-msg string;
The relay-msg option is constructed by intervening DHCPv6 relay agent software. This option is entirely used by proto-
col software, and is not meant for user configuration.
option dhcp6.unicast ip6-address;
The unicast option is provided by DHCPv6 servers which are willing (or prefer) to receive Renew packets from their
clients by exchanging UDP unicasts with them. Normally, DHCPv6 clients will multicast their Renew messages. This may
be configured on the server, and should be configured as an address the server is ready to reply to.
option dhcp6.status-code status-code [ string ] ;
The status-code option is provided by DHCPv6 servers to inform clients of error conditions during protocol communica-
tion. This option is manufactured and digested by protocol software, and should not be configured.
option dhcp6.rapid-commit ;
The rapid-commit option is a zero-length option that clients use to indicate their desire to enter into rapid-commit
with the server. This option is not supported by the client at this time, and is digested by the server when present,
so should not be configured.
option dhcp6.vendor-opts string;
The vendor-opts option is actually an encapsulated sub-option space, in which each Vendor-specific Information Option
(VSIO) is identified by a 32-bit Enterprise-ID number. The encapsulated option spaces within these options are defined
by the vendors.
To make use of this option, the best way is to examine the section titled VENDOR ENCAPSULATED OPTIONS below, in partic-
ular the bits about the "vsio" option space.
option dhcp6.interface-id string;
The interface-id option is manufactured by relay agents, and may be used to guide configuration differentiating clients
by the interface they are remotely attached to. It does not make sense to configure a value for this option, but it
may make sense to inspect its contents.
option dhcp6.reconf-msg dhcpv6-message;
The reconf-msg option is manufactured by servers, and sent to clients in Reconfigure messages to inform them of what
message the client should Reconfigure using. There is no support for DHCPv6 Reconfigure extensions, and this option is
documented informationally only.
option dhcp6.reconf-accept ;
The reconf-accept option is included by DHCPv6 clients that support the Reconfigure extentions, advertising that they
will respond if the server were to ask them to Reconfigure. There is no support for DHCPv6 Reconfigure extensions, and
this option is documented informationally only.
option dhcp6.sip-servers-names domain-list;
The sip-servers-names option allows SIP clients to locate a local SIP server that is to be used for all outbound SIP
requests, a so-called"outbound proxy server." If you wish to use manually entered IPv6 addresses instead, please see
the sip-servers-addresses option below.
option dhcp6.sip-servers-addresses ip6-address [, ip6-address ... ] ;
The sip-servers-addresses option allows SIP clients to locate a local SIP server that is to be used for all outbound
SIP requests, a so-called "outbound proxy servers." If you wish to use domain names rather than IPv6 addresses, please
see the sip-servers-names option above.
option dhcp6.name-servers ip6-address [, ip6-address ... ] ;
The name-servers option instructs clients about locally available recursive DNS servers. It is easiest to describe
this as the "nameserver" line in /etc/resolv.conf.
option dhcp6.domain-search domain-list;
The domain-search option specifies the client's domain search path to be applied to recursive DNS queries. It is easi-
est to describe this as the "search" line in /etc/resolv.conf.
option dhcp6.ia-pd string;
The ia-pd option is manufactured by clients and servers to create a Prefix Delegation binding - to delegate an IPv6
prefix to the client. It is not directly edited in dhcpd.conf(5) or dhclient.conf(5), but rather is manufactured and
consumed by the software.
option dhcp6.ia-prefix string;
The ia-prefix option is placed inside ia-pd options in order to identify the prefix(es) allocated to the client. It is
not directly edited in dhcpd.conf(5) or dhclient.conf(5), but rather is manufactured and consumed by the software.
option dhcp6.nis-servers ip6-address [, ip6-address ... ] ;
The nis-servers option identifies, in order, NIS servers available to the client.
option dhcp6.nisp-servers ip6-address [, ip6-address ... ] ;
The nisp-servers option identifies, in order, NIS+ servers available to the client.
option nis-domain-name domain-list;
The nis-domain-name option specifies the NIS domain name the client is expected to use, and is related to the nis-
servers option.
option nisp-domain-name domain-list;
The nisp-domain-name option specifies the NIS+ domain name the client is expected to use, and is related to the nisp-
servers option.
option dhcp6.sntp-servers ip6-address [, ip6-address ... ] ;
The sntp-servers option specifies a list of local SNTP servers available for the client to synchronize their clocks.
option dhcp6.info-refresh-time uint32;
The info-refresh-time option gives DHCPv6 clients using Information-request messages a hint as to how long they should
between refreshing the information they were given. Note that this option will only be delivered to the client, and be
likely to affect the client's behaviour, if the client requested the option.
option dhcp6.bcms-server-d domain-list;
The bcms-server-d option contains the domain names of local BCMS (Broadcast and Multicast Control Services) controllers
which the client may use.
option dhcp6.bcms-server-a ip6-address [, ip6-address ... ] ;
The bcms-server-a option contains the IPv6 addresses of local BCMS (Broadcast and Multicast Control Services) con-
trollers which the client may use.
option dhcp6.remote-id string;
The remote-id option is constructed by relay agents, to inform the server of details pertaining to what the relay knows
about the client (such as what port it is attached to, and so forth). The contents of this option have some vendor-
specific structure (similar to VSIO), but we have chosen to treat this option as an opaque field.
option dhcp6.subscriber-id;
The subscriber-id option is an opaque field provided by the relay agent, which provides additional information about
the subscriber in question. The exact contents of this option depend upon the vendor and/or the operator's configura-
tion of the remote device, and as such is an opaque field.
option dhcp6.fqdn string;
The fqdn option is normally constructed by the client or server, and negotiates the client's Fully Qualified Domain
Name, as well as which party is responsible for Dynamic DNS Updates. See the section on the Client FQDN SubOptions for
full details (the DHCPv4 and DHCPv6 FQDN options use the same "fqdn." encapsulated space, so are in all ways identi-
cal).
option dhcp6.lq-query string;
The lq-query option is used internally by for lease query.
option dhcp6.client-data string;
The client-data option is used internally by for lease query.
option dhcp6.clt-time uint32;
The clt-time option is used internally by for lease query.
option dhcp6.lq-relay-data ip6-address string;
The lq-relay-data option is used internally by for lease query.
option dhcp6.lq-client-link ip6-address [, ip6-address ... ] ;
The lq-client-link option is used internally by for lease query.
DEFINING NEW OPTIONS
The Internet Systems Consortium DHCP client and server provide the capability to define new options. Each DHCP option
has a name, a code, and a structure. The name is used by you to refer to the option. The code is a number, used by
the DHCP server and client to refer to an option. The structure describes what the contents of an option looks like.
To define a new option, you need to choose a name for it that is not in use for some other option - for example, you
can't use "host-name" because the DHCP protocol already defines a host-name option, which is documented earlier in this
manual page. If an option name doesn't appear in this manual page, you can use it, but it's probably a good idea to put
some kind of unique string at the beginning so you can be sure that future options don't take your name. For example,
you might define an option, "local-host-name", feeling some confidence that no official DHCP option name will ever start
with "local".
Once you have chosen a name, you must choose a code. All codes between 224 and 254 are reserved as 'site-local' DHCP
options, so you can pick any one of these for your site (not for your product/application). In RFC3942, site-local space
was moved from starting at 128 to starting at 224. In practice, some vendors have interpreted the protocol rather
loosely and have used option code values greater than 128 themselves. There's no real way to avoid this problem, and it
was thought to be unlikely to cause too much trouble in practice. If you come across a vendor-documented option code in
either the new or old site-local spaces, please contact your vendor and inform them about rfc3942.
The structure of an option is simply the format in which the option data appears. The ISC DHCP server currently sup-
ports a few simple types, like integers, booleans, strings and IP addresses, and it also supports the ability to define
arrays of single types or arrays of fixed sequences of types.
New options are declared as follows:
option new-name code new-code = definition ;
The values of new-name and new-code should be the name you have chosen for the new option and the code you have chosen.
The definition should be the definition of the structure of the option.
The following simple option type definitions are supported:
BOOLEAN
option new-name code new-code = boolean ;
An option of type boolean is a flag with a value of either on or off (or true or false). So an example use of the bool-
ean type would be:
option use-zephyr code 180 = boolean;
option use-zephyr on;
INTEGER
option new-name code new-code = sign integer width ;
The sign token should either be blank, unsigned or signed. The width can be either 8, 16 or 32, and refers to the num-
ber of bits in the integer. So for example, the following two lines show a definition of the sql-connection-max option
and its use:
option sql-connection-max code 192 = unsigned integer 16;
option sql-connection-max 1536;
IP-ADDRESS
option new-name code new-code = ip-address ;
An option whose structure is an IP address can be expressed either as a domain name or as a dotted quad. So the follow-
ing is an example use of the ip-address type:
option sql-server-address code 193 = ip-address;
option sql-server-address sql.example.com;
IP6-ADDRESS
option new-name code new-code = ip6-address ;
An option whose structure is an IPv6 address must be expressed as a valid IPv6 address. The following is an example use
of the ip6-address type:
option dhcp6.some-server code 1234 = array of ip6-address;
option dhcp6.some-server 3ffe:bbbb:aaaa:aaaa::1, 3ffe:bbbb:aaaa:aaaa::2;
TEXT
option new-name code new-code = text ;
An option whose type is text will encode an ASCII text string. For example:
option sql-default-connection-name code 194 = text;
option sql-default-connection-name "PRODZA";
DATA STRING
option new-name code new-code = string ;
An option whose type is a data string is essentially just a collection of bytes, and can be specified either as quoted
text, like the text type, or as a list of hexadecimal contents separated by colons whose values must be between 0 and FF.
For example:
option sql-identification-token code 195 = string;
option sql-identification-token 17:23:19:a6:42:ea:99:7c:22;
DOMAIN-LIST
option new-name code new-code = domain-list [compressed] ;
An option whose type is domain-list is an RFC1035 formatted (on the wire, "DNS Format") list of domain names, separated
by root labels. The optional compressed keyword indicates if the option should be compressed relative to the start of
the option contents (not the packet contents).
When in doubt, omit the compressed keyword. When the software recieves an option that is compressed and the compressed
keyword is omitted, it will still decompress the option (relative to the option contents field). The keyword only con-
trols whether or not transmitted packets are compressed.
Note that when domain-list formatted options are output as environment variables to dhclient-script(8), the standard DNS
-escape mechanism is used: they are decimal. This is appropriate for direct use in eg /etc/resolv.conf.
ENCAPSULATION
option new-name code new-code = encapsulate identifier ;
An option whose type is encapsulate will encapsulate the contents of the option space specified in identifier. Examples
of encapsulated options in the DHCP protocol as it currently exists include the vendor-encapsulated-options option, the
netware-suboptions option and the relay-agent-information option.
option space local;
option local.demo code 1 = text;
option local-encapsulation code 197 = encapsulate local;
option local.demo "demo";
ARRAYS
Options can contain arrays of any of the above types except for the text and data string types, which aren't currently
supported in arrays. An example of an array definition is as follows:
option kerberos-servers code 200 = array of ip-address;
option kerberos-servers 10.20.10.1, 10.20.11.1;
RECORDS
Options can also contain data structures consisting of a sequence of data types, which is sometimes called a record type.
For example:
option contrived-001 code 201 = { boolean, integer 32, text };
option contrived-001 on 1772 "contrivance";
It's also possible to have options that are arrays of records, for example:
option new-static-routes code 201 = array of {
ip-address, ip-address, ip-address, integer 8 };
option static-routes
10.0.0.0 255.255.255.0 net-0-rtr.example.com 1,
10.0.1.0 255.255.255.0 net-1-rtr.example.com 1,
10.2.0.0 255.255.224.0 net-2-0-rtr.example.com 3;
VENDOR ENCAPSULATED OPTIONS
The DHCP protocol defines the vendor-encapsulated-options option, which allows vendors to define their own options that
will be sent encapsulated in a standard DHCP option. It also defines the Vendor Identified Vendor Sub Options option
("VIVSO"), and the DHCPv6 protocol defines the Vendor-specific Information Option ("VSIO"). The format of all of these
options is usually internally a string of options, similarly to other normal DHCP options. The VIVSO and VSIO options
differ in that that they contain options that correspond to vendor Enterprise-ID numbers (assigned by IANA), which then
contain options according to each Vendor's specifications. You will need to refer to your vendor's documentation in
order to form options to their specification.
The value of these options can be set in one of two ways. The first way is to simply specify the data directly, using a
text string or a colon-separated list of hexadecimal values. For help in forming these strings, please refer to RFC2132
for the DHCPv4 Vendor Specific Information Option, RFC3925 for the DHCPv4 Vendor Identified Vendor Sub Options, or
RFC3315 for the DHCPv6 Vendor-specific Information Option. For example:
option vendor-encapsulated-options
2:4:
AC:11:41:1:
3:12:
73:75:6e:64:68:63:70:2d:73:65:72:76:65:72:31:37:2d:31:
4:12:
2f:65:78:70:6f:72:74:2f:72:6f:6f:74:2f:69:38:36:70:63;
option vivso
00:00:09:bf:0E:
01:0c:
48:65:6c:6c:6f:20:77:6f:72:6c:64:21;
option dhcp6.vendor-opts
00:00:09:bf:
00:01:00:0c:
48:65:6c:6c:6f:20:77:6f:72:6c:64:21;
The second way of setting the value of these options is to have the DHCP server generate a vendor-specific option buffer.
To do this, you must do four things: define an option space, define some options in that option space, provide values for
them, and specify that that option space should be used to generate the relevant option.
To define a new option space in which vendor options can be stored, use the option space statement:
option space name [ [ code width number ] [ length width number ] [ hash size number ] ] ;
Where the numbers following code width, length width, and hash size respectively identify the number of bytes used to
describe option codes, option lengths, and the size in buckets of the hash tables to hold options in this space (most
DHCPv4 option spaces use 1 byte codes and lengths, which is the default, whereas most DHCPv6 option spaces use 2 byte
codes and lengths).
The code and length widths are used in DHCP protocol - you must configure these numbers to match the applicable option
space you are configuring. They each default to 1. Valid values for code widths are 1, 2 or 4. Valid values for length
widths are 0, 1 or 2. Most DHCPv4 option spaces use 1 byte codes and lengths, which is the default, whereas most DHCPv6
option spaces use 2 byte codes and lengths. A zero-byte length produces options similar to the DHCPv6 Vendor-specific
Information Option - but not their contents!
The hash size defaults depend upon the code width selected, and may be 254 or 1009. Valid values range between 1 and
65535. Note that the higher you configure this value, the more memory will be used. It is considered good practice to
configure a value that is slightly larger than the estimated number of options you plan to configure within the space.
Previous versions of ISC DHCP (up to and including DHCP 3.0.*), this value was fixed at 9973.
The name can then be used in option definitions, as described earlier in this document. For example:
option space SUNW code width 1 length width 1 hash size 3;
option SUNW.server-address code 2 = ip-address;
option SUNW.server-name code 3 = text;
option SUNW.root-path code 4 = text;
option space ISC code width 1 length width 1 hash size 3;
option ISC.sample code 1 = text;
option vendor.ISC code 2495 = encapsulate vivso-sample;
option vendor-class.ISC code 2495 = text;
option ISC.sample "configuration text here";
option vendor-class.ISC "vendor class here";
option space docsis code width 2 length width 2 hash size 17;
option docsis.tftp-servers code 32 = array of ip6-address;
option docsis.cablelabs-configuration-file code 33 = text;
option docsis.cablelabs-syslog-servers code 34 = array of ip6-address;
option docsis.device-id code 36 = string;
option docsis.time-servers code 37 = array of ip6-address;
option docsis.time-offset code 38 = signed integer 32;
option vsio.docsis code 4491 = encapsulate docsis;
Once you have defined an option space and the format of some options, you can set up scopes that define values for those
options, and you can say when to use them. For example, suppose you want to handle two different classes of clients.
Using the option space definition shown in the previous example, you can send different option values to different
clients based on the vendor-class-identifier option that the clients send, as follows:
class "vendor-classes" {
match option vendor-class-identifier;
}
subclass "vendor-classes" "SUNW.Ultra-5_10" {
vendor-option-space SUNW;
option SUNW.root-path "/export/root/sparc";
}
subclass "vendor-classes" "SUNW.i86pc" {
vendor-option-space SUNW;
option SUNW.root-path "/export/root/i86pc";
}
option SUNW.server-address 172.17.65.1;
option SUNW.server-name "sundhcp-server17-1";
option vivso-sample.sample "Hello world!";
option docsis.tftp-servers ::1;
As you can see in the preceding example, regular scoping rules apply, so you can define values that are global in the
global scope, and only define values that are specific to a particular class in the local scope. The vendor-option-space
declaration tells the DHCP server to use options in the SUNW option space to construct the DHCPv4 vendor-encapsulated-
options option. This is a limitation of that option - the DHCPv4 VIVSO and the DHCPv6 VSIO options can have multiple
vendor definitions all at once (even transmitted to the same client), so it is not necessary to configure this.
SEE ALSO
dhcpd.conf(5), dhcpd.leases(5), dhclient.conf(5), dhcp-eval(5), dhcpd(8), dhclient(8), RFC2132, RFC2131, RFC3046,
RFC3315.
AUTHOR
The Internet Systems Consortium DHCP Distribution was written by Ted Lemon under a contract with Vixie Labs. Funding for
this project was provided through Internet Systems Consortium. Information about Internet Systems Consortium can be
found at https://www.isc.org.
dhcpd-options(5)
