/* Void Main's man pages */
{ phpMan } else { main(); }
FOOMATIC-GETPJLOPTIONS(8) FOOMATIC-GETPJLOPTIONS(8)
NAME
foomatic-getpjloptions - <put a short description here>
SYNOPSIS
foomatic-getpjloptions device
foomatic-getpjloptions hostname port
DESCRIPTION
foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options and status from a printer over a net-
work connection or device bidirectional interface such as parallel, USB, serial. printers to standard output. The output
can be piped into foomatic-addpjloptions to add options to the database.
Options
device The interface to which a local printer is connected, e.g. /dev/lp0, /dev/usb/lp0, /dev/tty00, etc. For a par-
allel port, you must have bidirectional support enabled at the BIOS level and the parallel port driver must
support the bidirectional mode. Check your parallel port BIOS settings for EPP/bi-directional mode.
hostname Host name or IP address of a network printer (HP JetDirect, DLINK, etc.).
port Port on which your network printer listens for socket (Appsocket) connections. Most common ports are 9100
(JetDirect), 10000 (DLINK). Usually you can configure the port via a configuration interface.
EXIT STATUS
foomatic-getpjloptions returns ???
AUTHOR
Manfred Wassmann <manoloATNCC-1701.de> for the foomatic project using output from the associated binary. Modi-
fied by Patrick Powell <papowell at lprng.com> to provide betters support for network printers, error messages, and
remove CR and FF from output.
WARNINGS
Uni-directional protocols as remote LPD are not supported as no status is returned. Some network print servers which
attach to a printer parallel port do not support bidirectional mode.
Foomatic Project 2001-05-07 FOOMATIC-GETPJLOPTIONS(8)

