FPIT(4)                                                                                                                  FPIT(4)



NAME
       fpit - Fujitsu Stylistic input driver

SYNOPSIS
       Section "InputDevice"
         Identifier "idevname"
         Driver "fpit"
         Option "Device"   "devpath"
         ...
       EndSection

DESCRIPTION
       fpit is an Xorg input driver for Fujitsu Stylistic Tablet PCs.

       The fpit driver functions as a pointer input device, and may be used as the X server's core pointer.

SUPPORTED HARDWARE
       This  driver  supports  the  touchscreen of the Stylistic LT and (with special options) of the Stylistic 500, 1000, 1200,
       2300, and 3400.  Modern FinePoint MP800 devices will also work with this driver.

       Under Linux the Fujitsu's serial port is not, by default, detected.  Therefore the port must be  configured  manually  as
       described in the accompanying readme.txt file.

       For example, add the following to your startup scripts for Stylistic xx00 devices:


       setserial /dev/ttyS3 autoconfig

       setserial /dev/ttyS3 IRQ 15 baud_base 115200 port 0xfce8

       This  driver  now supports Stylistic 3400 (and possibly other passive-pen systems) with a special "Passive" paramter. Try
       this serial configuration for the 3400:


       setserial /dev/ttyS3 autoconfig

       setserial /dev/ttyS3 uart 16450 irq 5 port 0xfd68


CONFIGURATION DETAILS
       Please refer to xorg.conf(5x) for general configuration details and for options that can be used with all input  drivers.
       This section only covers configuration details specific to this driver.

       The device supports the following options:

               Option "MaximumXPosition" "number"
                   Sets the maximum X position, use this to calibrate your touchscreen's right hand edge.

               Option "MinimumXPosition" "number"
                   Sets the minimum X position, use this to calibrate your touchscreen's left hand edge.

               Option "MaximumYPosition" "number"

               Option "MinimumYPosition" "number"
                   Same as for X axis, but for Y axis.

               Option "InvertX"

               Option "InvertY"
                   Invert the specified axis.

               Option "SwapXY"
                   Swap the X and Y axis (after inversions).

               Option "Rotate" "CW"
                   Option  "Rotate"  "CWW"  Manipulate  the  invert  and  swap  options  to match screen rotations. (Will behave
                   strangely if combined with invert or swap options.)   New  users  should  consider  the  "TrackRandR"  option
                   instead.

               Option "DeviceName" "name"
                   Option "DeviceName" "name" sets the name of the X device.

               Option "AlwaysCore" "on"
                   enables  the  sharing  of the core pointer. When this feature is enabled, the device will take control of the
                   core pointer (and thus will emit core events) and at the same time will be able, when  asked  so,  to  report
                   extended  events.  You can use the last available integer feedback to control this feature. When the value of
                   the feedback is zero, the feature is disabled. The feature is enabled for any other value.

               Option "DebugLevel" number
                   sets the level of debugging info reported.

               Option "BaudRate" "38400", "19200" (default) or "9600"
                   changes the serial link speed.

               Option "Passive"
                   decodes the passive pen.  Option "TrackRandR" automatically keeps the  cursor  synchronized  with  the  pen's
                   position, even when the screen is resized or rotated. (Recommended for tablet PC's.)

       Example, for Stylistic LT setup is:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         # Option "TrackRandR"
       EndSection

       And for other Stylistic devices try:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         Option "BaudRate" "19200"
         Option "MaximumXPosition" "6250"
         Option "MaximumYPosition" "4950"
         Option "MinimumXPosition" "130"
         Option "MinimumYPosition" "0"
         Option "InvertY"
         # Option "TrackRandR"
       EndSection

       For Stylistic 3400:
       Section "InputDevice"
         Identifier "mouse0"
         Driver "fpit"
         Option "Device"   "/dev/ttyS3"
         Option "BaudRate" "9600"
         Option "MaximumXPosition" "4070"
         Option "MaximumYPosition" "4020"
         Option "MinimumXPosition" "0"
         Option "MinimumYPosition" "0"
         Option "Passive"
         Option "SendCoreEvents"
         # Option "TrackRandR"
       EndSection


SEE ALSO
       Xorg(1), xorg.conf(5), Xserver(1), X(7).

AUTHORS
       Original FPIT port: Rob Tsuk <robATtsuk.com> and John Apfelbaum <johnapfATlinuxslate.com>

       X4 Port: Richard Miller-Smith <richard.miller-smithATphilips.com>, based on Elographics code from: Patrick Lecoanet

       X4.2 Cleanup: Alan Cox



X Version 11                                          xf86-input-fpit 1.3.0                                              FPIT(4)