phpMan

/* Void Main's man pages */

{ phpMan } else { main(); }

GIT-TAG(1) Git Manual GIT-TAG(1)

NAME
git-tag - Create, list, delete or verify a tag object signed with GPG

SYNOPSIS
git tag [-a | -s | -u <key-id>] [-f] [-m <msg> | -F <file>]
<tagname> [<commit> | <object>]
git tag -d <tagname>...
git tag [-n[<num>]] -l [--contains <commit>] [<pattern>]
git tag -v <tagname>...

DESCRIPTION
Add a tag reference in .git/refs/tags/, unless -d/-l/-v is given to delete, list or verify tags.

Unless -f is given, the tag to be created must not yet exist in the .git/refs/tags/ directory.

If one of -a, -s, or -u <key-id> is passed, the command creates a tag object, and requires a tag message. Unless -m <msg>
or -F <file> is given, an editor is started for the user to type in the tag message.

If -m <msg> or -F <file> is given and -a, -s, and -u <key-id> are absent, -a is implied.

Otherwise just a tag reference for the SHA1 object name of the commit object is created (i.e. a lightweight tag).

A GnuPG signed tag object will be created when -s or -u <key-id> is used. When -u <key-id> is not used, the committer
identity for the current user is used to find the GnuPG key for signing.

OPTIONS
-a
Make an unsigned, annotated tag object

-s
Make a GPG-signed tag, using the default e-mail address's key

-u <key-id>
Make a GPG-signed tag, using the given key

-f, --force
Replace an existing tag with the given name (instead of failing)

-d
Delete existing tags with the given names.

-v
Verify the gpg signature of the given tag names.

-n<num>
<num> specifies how many lines from the annotation, if any, are printed when using -l. The default is not to print
any annotation lines. If no number is given to -n, only the first line is printed. If the tag is not annotated, the
commit message is displayed instead.

-l <pattern>
List tags with names that match the given pattern (or all if no pattern is given). Typing "git tag" without
arguments, also lists all tags.

--contains <commit>
Only list tags which contain the specified commit.

-m <msg>
Use the given tag message (instead of prompting). If multiple -m options are given, their values are concatenated as
separate paragraphs. Implies -a if none of -a, -s, or -u <key-id> is given.

-F <file>
Take the tag message from the given file. Use - to read the message from the standard input. Implies -a if none of
-a, -s, or -u <key-id> is given.

<tagname>
The name of the tag to create, delete, or describe. The new tag name must pass all checks defined by git-check-ref-
format(1). Some of these checks may restrict the characters allowed in a tag name.

CONFIGURATION
By default, git tag in sign-with-default mode (-s) will use your committer identity (of the form "Your Name
<yourATemail.address[1]>") to find a key. If you want to use a different default key, you can specify it in the repository
configuration as follows:

[user]
signingkey = <gpg-key-id>

DISCUSSION
On Re-tagging
What should you do when you tag a wrong commit and you would want to re-tag?

If you never pushed anything out, just re-tag it. Use "-f" to replace the old one. And you're done.

But if you have pushed things out (or others could just read your repository directly), then others will have already
seen the old tag. In that case you can do one of two things:

1. The sane thing. Just admit you screwed up, and use a different name. Others have already seen one tag-name, and if
you keep the same name, you may be in the situation that two people both have "version X", but they actually have
different "X"'s. So just call it "X.1" and be done with it.

2. The insane thing. You really want to call the new version "X" too, even though others have already seen the old one.
So just use git tag -f again, as if you hadn't already published the old one.

However, Git does not (and it should not) change tags behind users back. So if somebody already got the old tag, doing a
git pull on your tree shouldn't just make them overwrite the old one.

If somebody got a release tag from you, you cannot just change the tag for them by updating your own one. This is a big
security issue, in that people MUST be able to trust their tag-names. If you really want to do the insane thing, you need
to just fess up to it, and tell people that you messed up. You can do that by making a very public announcement saying:

Ok, I messed up, and I pushed out an earlier version tagged as X. I
then fixed something, and retagged the *fixed* tree as X again.

If you got the wrong tag, and want the new one, please delete
the old one and fetch the new one by doing:

git tag -d X
git fetch origin tag X

to get my updated tag.

You can test which tag you have by doing

git rev-parse X

which should return 0123456789abcdef.. if you have the new version.

Sorry for the inconvenience.

Does this seem a bit complicated? It should be. There is no way that it would be correct to just "fix" it automatically.
People need to know that their tags might have been changed.

On Automatic following
If you are following somebody else's tree, you are most likely using remote-tracking branches (refs/heads/origin in
traditional layout, or refs/remotes/origin/master in the separate-remote layout). You usually want the tags from the
other end.

On the other hand, if you are fetching because you would want a one-shot merge from somebody else, you typically do not
want to get tags from there. This happens more often for people near the toplevel but not limited to them. Mere mortals
when pulling from each other do not necessarily want to automatically get private anchor point tags from the other
person.

Often, "please pull" messages on the mailing list just provide two pieces of information: a repo URL and a branch name;
this is designed to be easily cut&pasted at the end of a git fetch command line:

Linus, please pull from

git://git..../proj.git master

to get the following updates...

becomes:

$ git pull git://git..../proj.git master

In such a case, you do not want to automatically follow the other person's tags.

One important aspect of git is its distributed nature, which largely means there is no inherent "upstream" or
"downstream" in the system. On the face of it, the above example might seem to indicate that the tag namespace is owned
by the upper echelon of people and that tags only flow downwards, but that is not the case. It only shows that the usage
pattern determines who are interested in whose tags.

A one-shot pull is a sign that a commit history is now crossing the boundary between one circle of people (e.g. "people
who are primarily interested in the networking part of the kernel") who may have their own set of tags (e.g. "this is the
third release candidate from the networking group to be proposed for general consumption with 2.6.21 release") to another
circle of people (e.g. "people who integrate various subsystem improvements"). The latter are usually not interested in
the detailed tags used internally in the former group (that is what "internal" means). That is why it is desirable not to
follow tags automatically in this case.

It may well be that among networking people, they may want to exchange the tags internal to their group, but in that
workflow they are most likely tracking each other's progress by having remote-tracking branches. Again, the heuristic to
automatically follow such tags is a good thing.

On Backdating Tags
If you have imported some changes from another VCS and would like to add tags for major releases of your work, it is
useful to be able to specify the date to embed inside of the tag object; such data in the tag object affects, for
example, the ordering of tags in the gitweb interface.

To set the date used in future tag objects, set the environment variable GIT_COMMITTER_DATE (see the later discussion of
possible values; the most common form is "YYYY-MM-DD HH:MM").

For example:

$ GIT_COMMITTER_DATE="2006-10-02 10:31" git tag -s v1.0.1

DATE FORMATS
The GIT_AUTHOR_DATE, GIT_COMMITTER_DATE environment variables support the following date formats:

Git internal format
It is <unix timestamp> <timezone offset>, where <unix timestamp> is the number of seconds since the UNIX epoch.
<timezone offset> is a positive or negative offset from UTC. For example CET (which is 2 hours ahead UTC) is +0200.

RFC 2822
The standard email format as described by RFC 2822, for example Thu, 07 Apr 2005 22:13:13 +0200.

ISO 8601
Time and date specified by the ISO 8601 standard, for example 2005-04-07T22:13:13. The parser accepts a space instead
of the T character as well.

Note
In addition, the date part is accepted in the following formats: YYYY.MM.DD, MM/DD/YYYY and DD.MM.YYYY.