/* Void Main's man pages */
{ phpMan } else { main(); }
MAKE(1P) POSIX Programmer's Manual MAKE(1P)
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (con-
sult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on
Linux.
NAME
make - maintain, update, and regenerate groups of programs (DEVELOPMENT)
SYNOPSIS
make [-einpqrst][-f makefile]...[ -k| -S][macro=value]...
[target_name...]
DESCRIPTION
The make utility shall update files that are derived from other files. A typical case is one where object files are
derived from the corresponding source files. The make utility examines time relationships and shall update those derived
files (called targets) that have modified times earlier than the modified times of the files (called prerequisites) from
which they are derived. A description file (makefile) contains a description of the relationships between files, and the
commands that need to be executed to update the targets to reflect changes in their prerequisites. Each specification,
or rule, shall consist of a target, optional prerequisites, and optional commands to be executed when a prerequisite is
newer than the target. There are two types of rule:
1. Inference rules, which have one target name with at least one period ( '.' ) and no slash ( '/' )
2. Target rules, which can have more than one target name
In addition, make shall have a collection of built-in macros and inference rules that infer prerequisite relationships to
simplify maintenance of programs.
To receive exactly the behavior described in this section, the user shall ensure that a portable makefile shall:
* Include the special target .POSIX
* Omit any special target reserved for implementations (a leading period followed by uppercase letters) that has not
been specified by this section
The behavior of make is unspecified if either or both of these conditions are not met.
OPTIONS
The make utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax
Guidelines.
The following options shall be supported:
-e Cause environment variables, including those with null values, to override macro assignments within makefiles.
-f makefile
Specify a different makefile. The argument makefile is a pathname of a description file, which is also referred to
as the makefile. A pathname of '-' shall denote the standard input. There can be multiple instances of this
option, and they shall be processed in the order specified. The effect of specifying the same option-argument more
than once is unspecified.
-i Ignore error codes returned by invoked commands. This mode is the same as if the special target .IGNORE were spec-
ified without prerequisites.
-k Continue to update other targets that do not depend on the current target if a non-ignored error occurs while exe-
cuting the commands to bring a target up-to-date.
-n Write commands that would be executed on standard output, but do not execute them. However, lines with a plus sign
( '+' ) prefix shall be executed. In this mode, lines with an at sign ( '@' ) character prefix shall be written to
standard output.
-p Write to standard output the complete set of macro definitions and target descriptions. The output format is
unspecified.
-q Return a zero exit value if the target file is up-to-date; otherwise, return an exit value of 1. Targets shall not
be updated if this option is specified. However, a makefile command line (associated with the targets) with a plus
sign ( '+' ) prefix shall be executed.
-r Clear the suffix list and do not use the built-in rules.
-S Terminate make if an error occurs while executing the commands to bring a target up-to-date. This shall be the
default and the opposite of -k.
-s Do not write makefile command lines or touch messages (see -t) to standard output before executing. This mode
shall be the same as if the special target .SILENT were specified without prerequisites.
-t Update the modification time of each target as though a touch target had been executed. Targets that have prereq-
uisites but no commands (see Target Rules ), or that are already up-to-date, shall not be touched in this manner.
Write messages to standard output for each target file indicating the name of the file and that it was touched.
Normally, the makefile command lines associated with each target are not executed. However, a command line with a
plus sign ( '+' ) prefix shall be executed.
Any options specified in the MAKEFLAGS environment variable shall be evaluated before any options specified on the make
utility command line. If the -k and -S options are both specified on the make utility command line or by the MAKEFLAGS
environment variable, the last option specified shall take precedence. If the -f or -p options appear in the MAKEFLAGS
environment variable, the result is undefined.
OPERANDS
The following operands shall be supported:
target_name
Target names, as defined in the EXTENDED DESCRIPTION section. If no target is specified, while make is processing
the makefiles, the first target that make encounters that is not a special target or an inference rule shall be
used.
macro=value
Macro definitions, as defined in Macros .
If the target_name and macro= value operands are intermixed on the make utility command line, the results are unspeci-
fied.
STDIN
The standard input shall be used only if the makefile option-argument is '-' . See the INPUT FILES section.
INPUT FILES
The input file, otherwise known as the makefile, is a text file containing rules, macro definitions, and comments. See
the EXTENDED DESCRIPTION section.
ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of make:
LANG Provide a default value for the internationalization variables that are unset or null. (See the Base Definitions
volume of IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables for the precedence of international-
ization variables used to determine the values of locale categories.)
LC_ALL If set to a non-empty string value, override the values of all the other internationalization variables.
LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-
byte as opposed to multi-byte characters in arguments and input files).
LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diagnostic messages written to stan-
dard error.
MAKEFLAGS
This variable shall be interpreted as a character string representing a series of option characters to be used as
the default options. The implementation shall accept both of the following formats (but need not accept them when
intermixed):
* The characters are option letters without the leading hyphens or <blank> separation used on a make utility com-
mand line.
* The characters are formatted in a manner similar to a portion of the make utility command line: options are
preceded by hyphens and <blank>-separated as described in the Base Definitions volume of IEEE Std 1003.1-2001,
Section 12.2, Utility Syntax Guidelines. The macro= value macro definition operands can also be included. The
difference between the contents of MAKEFLAGS and the make utility command line is that the contents of the
variable shall not be subjected to the word expansions (see Word Expansions ) associated with parsing the com-
mand line values.
NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES .
PROJECTDIR
Provide a directory to be used to search for SCCS files not found in the current directory. In all of the follow-
ing cases, the search for SCCS files is made in the directory SCCS in the identified directory. If the value of
PROJECTDIR begins with a slash, it shall be considered an absolute pathname; otherwise, the value of PROJECTDIR is
treated as a user name and that user's initial working directory shall be examined for a subdirectory src or
source. If such a directory is found, it shall be used. Otherwise, the value is used as a relative pathname.
If PROJECTDIR is not set or has a null value, the search for SCCS files shall be made in the directory SCCS in the cur-
rent directory.
The setting of PROJECTDIR affects all files listed in the remainder of this utility description for files with a compo-
nent named SCCS.
The value of the SHELL environment variable shall not be used as a macro and shall not be modified by defining the SHELL
macro in a makefile or on the command line. All other environment variables, including those with null values, shall be
used as macros, as defined in Macros .
ASYNCHRONOUS EVENTS
If not already ignored, make shall trap SIGHUP, SIGTERM, SIGINT, and SIGQUIT and remove the current target unless the
target is a directory or the target is a prerequisite of the special target .PRECIOUS or unless one of the -n, -p, or -q
options was specified. Any targets removed in this manner shall be reported in diagnostic messages of unspecified format,
written to standard error. After this cleanup process, if any, make shall take the standard action for all other signals.
STDOUT
The make utility shall write all commands to be executed to standard output unless the -s option was specified, the com-
mand is prefixed with an at sign, or the special target .SILENT has either the current target as a prerequisite or has no
prerequisites. If make is invoked without any work needing to be done, it shall write a message to standard output indi-
cating that no action was taken. If the -t option is present and a file is touched, make shall write to standard output a
message of unspecified format indicating that the file was touched, including the filename of the file.
STDERR
The standard error shall be used only for diagnostic messages.
OUTPUT FILES
Files can be created when the -t option is present. Additional files can also be created by the utilities invoked by
make.
EXTENDED DESCRIPTION
The make utility attempts to perform the actions required to ensure that the specified targets are up-to-date. A target
is considered out-of-date if it is older than any of its prerequisites or if it does not exist. The make utility shall
treat all prerequisites as targets themselves and recursively ensure that they are up-to-date, processing them in the
order in which they appear in the rule. The make utility shall use the modification times of files to determine whether
the corresponding targets are out-of-date.
After make has ensured that all of the prerequisites of a target are up-to-date and if the target is out-of-date, the
commands associated with the target entry shall be executed. If there are no commands listed for the target, the target
shall be treated as up-to-date.
Makefile Syntax
A makefile can contain rules, macro definitions (see Macros ), and comments. There are two kinds of rules: inference
rules and target rules. The make utility shall contain a set of built-in inference rules. If the -r option is present,
the built-in rules shall not be used and the suffix list shall be cleared. Additional rules of both types can be speci-
fied in a makefile. If a rule is defined more than once, the value of the rule shall be that of the last one specified.
Macros can also be defined more than once, and the value of the macro is specified in Macros . Comments start with a num-
ber sign ( '#' ) and continue until an unescaped <newline> is reached.
By default, the following files shall be tried in sequence: ./makefile and ./Makefile. If neither ./makefile or ./Make-
file are found, other implementation-defined files may also be tried. On XSI-conformant systems, the additional files
./s.makefile, SCCS/s.makefile, ./s.Makefile, and SCCS/s.Makefile shall also be tried.
The -f option shall direct make to ignore any of these default files and use the specified argument as a makefile
instead. If the '-' argument is specified, standard input shall be used.
The term makefile is used to refer to any rules provided by the user, whether in ./makefile or its variants, or specified
by the -f option.
The rules in makefiles shall consist of the following types of lines: target rules, including special targets (see Target
Rules ), inference rules (see Inference Rules ), macro definitions (see Macros ), empty lines, and comments.
When an escaped <newline> (one preceded by a backslash) is found anywhere in the makefile except in a command line, it
shall be replaced, along with any leading white space on the following line, with a single <space>. When an escaped <new-
line> is found in a command line in a makefile, the command line shall contain the backslash, the <newline>, and the next
line, except that the first character of the next line shall not be included if it is a <tab>.
Makefile Execution
Makefile command lines shall be processed one at a time by writing the makefile command line to the standard output
(unless one of the conditions listed under '@' suppresses the writing) and executing the command(s) in the line. A <tab>
may precede the command to standard output. Command execution shall be as if the makefile command line were the argument
to the system() function. The environment for the command being executed shall contain all of the variables in the envi-
ronment of make.
By default, when make receives a non-zero status from the execution of a command, it shall terminate with an error mes-
sage to standard error.
Makefile command lines can have one or more of the following prefixes: a hyphen ( '-' ), an at sign ( '@' ), or a plus
sign ( '+' ). These shall modify the way in which make processes the command. When a command is written to standard out-
put, the prefix shall not be included in the output.
- If the command prefix contains a hyphen, or the -i option is present, or the special target .IGNORE has either the
current target as a prerequisite or has no prerequisites, any error found while executing the command shall be
ignored.
@ If the command prefix contains an at sign and the make utility command line -n option is not specified, or the -s
option is present, or the special target .SILENT has either the current target as a prerequisite or has no prereq-
uisites, the command shall not be written to standard output before it is executed.
+ If the command prefix contains a plus sign, this indicates a makefile command line that shall be executed even if
-n, -q, or -t is specified.
Target Rules
Target rules are formatted as follows:
target [target...]: [prerequisite...][;command]
[<tab>command<tab>command...]
line that does not begin with <tab>
Target entries are specified by a <blank>-separated, non-null list of targets, then a colon, then a <blank>-separated,
possibly empty list of prerequisites. Text following a semicolon, if any, and all following lines that begin with a
<tab>, are makefile command lines to be executed to update the target. The first non-empty line that does not begin with
a <tab> or '#' shall begin a new entry. An empty or blank line, or a line beginning with '#', may begin a new entry.
Applications shall select target names from the set of characters consisting solely of periods, underscores, digits, and
alphabetics from the portable character set (see the Base Definitions volume of IEEE Std 1003.1-2001, Section 6.1, Porta-
ble Character Set). Implementations may allow other characters in target names as extensions. The interpretation of tar-
gets containing the characters '%' and '' is implementation-defined.
A target that has prerequisites, but does not have any commands, can be used to add to the prerequisite list for that
target. Only one target rule for any given target can contain commands.
Lines that begin with one of the following are called special targets and control the operation of make:
.DEFAULT
If the makefile uses this special target, the application shall ensure that it is specified with commands, but
without prerequisites. The commands shall be used by make if there are no other rules available to build a target.
.IGNORE
Prerequisites of this special target are targets themselves; this shall cause errors from commands associated with
them to be ignored in the same manner as specified by the -i option. Subsequent occurrences of .IGNORE shall add
to the list of targets ignoring command errors. If no prerequisites are specified, make shall behave as if the -i
option had been specified and errors from all commands associated with all targets shall be ignored.
.POSIX The application shall ensure that this special target is specified without prerequisites or commands. If it
appears as the first non-comment line in the makefile, make shall process the makefile as specified by this sec-
tion; otherwise, the behavior of make is unspecified.
.PRECIOUS
Prerequisites of this special target shall not be removed if make receives one of the asynchronous events explic-
itly described in the ASYNCHRONOUS EVENTS section. Subsequent occurrences of .PRECIOUS shall add to the list of
precious files. If no prerequisites are specified, all targets in the makefile shall be treated as if specified
with .PRECIOUS.
.SCCS_GET
The application shall ensure that this special target is specified without prerequisites. If this special target
is included in a makefile, the commands specified with this target shall replace the default commands associated
with this special target (see Default Rules ). The commands specified with this target are used to get all SCCS
files that are not found in the current directory.
When source files are named in a dependency list, make shall treat them just like any other target. Because the source
file is presumed to be present in the directory, there is no need to add an entry for it to the makefile. When a target
has no dependencies, but is present in the directory, make shall assume that that file is up-to-date. If, however, an
SCCS file named SCCS/s. source_file is found for a target source_file, make compares the timestamp of the target file
with that of the SCCS/s.source_file to ensure the target is up-to-date. If the target is missing, or if the SCCS file is
newer, make shall automatically issue the commands specified for the .SCCS_GET special target to retrieve the most recent
version. However, if the target is writable by anyone, make shall not retrieve a new version.
.SILENT
Prerequisites of this special target are targets themselves; this shall cause commands associated with them not to
be written to the standard output before they are executed. Subsequent occurrences of .SILENT shall add to the
list of targets with silent commands. If no prerequisites are specified, make shall behave as if the -s option had
been specified and no commands or touch messages associated with any target shall be written to standard output.
.SUFFIXES
Prerequisites of .SUFFIXES shall be appended to the list of known suffixes and are used in conjunction with the
inference rules (see Inference Rules ). If .SUFFIXES does not have any prerequisites, the list of known suffixes
shall be cleared.
The special targets .IGNORE, .POSIX, .PRECIOUS, .SILENT, and .SUFFIXES shall be specified without commands.
Targets with names consisting of a leading period followed by the uppercase letters "POSIX" and then any other characters
are reserved for future standardization. Targets with names consisting of a leading period followed by one or more upper-
case letters are reserved for implementation extensions.
Macros
Macro definitions are in the form:
string1 = [string2]
The macro named string1 is defined as having the value of string2, where string2 is defined as all characters, if any,
after the equal sign, up to a comment character ( '#' ) or an unescaped <newline>. Any <blank>s immediately before or
after the equal sign shall be ignored.
Applications shall select macro names from the set of characters consisting solely of periods, underscores, digits, and
alphabetics from the portable character set (see the Base Definitions volume of IEEE Std 1003.1-2001, Section 6.1, Porta-
ble Character Set). A macro name shall not contain an equals sign. Implementations may allow other characters in macro
names as extensions.
Macros can appear anywhere in the makefile. Macro expansions using the forms $( string1) or ${ string1} shall be replaced
by string2, as follows:
* Macros in target lines shall be evaluated when the target line is read.
* Macros in makefile command lines shall be evaluated when the command is executed.
* Macros in the string before the equals sign in a macro definition shall be evaluated when the macro assignment is
made.
* Macros after the equals sign in a macro definition shall not be evaluated until the defined macro is used in a rule or
command, or before the equals sign in a macro definition.
The parentheses or braces are optional if string1 is a single character. The macro $$ shall be replaced by the single
character '$' . If string1 in a macro expansion contains a macro expansion, the results are unspecified.
Macro expansions using the forms $( string1 [: subst1 =[ subst2 ]]) or ${ string1 [: subst1 =[ subst2 ]]} can be used to
replace all occurrences of subst1 with subst2 when the macro substitution is performed. The subst1 to be replaced shall
be recognized when it is a suffix at the end of a word in string1 (where a word, in this context, is defined to be a
string delimited by the beginning of the line, a <blank>, or a <newline>). If string1 in a macro expansion contains a
macro expansion, the results are unspecified.
Macro expansions in string1 of macro definition lines shall be evaluated when read. Macro expansions in string2 of macro
definition lines shall be performed when the macro identified by string1 is expanded in a rule or command.
Macro definitions shall be taken from the following sources, in the following logical order, before the makefile(s) are
read.
1. Macros specified on the make utility command line, in the order specified on the command line. It is unspecified
whether the internal macros defined in Internal Macros are accepted from this source.
2. Macros defined by the MAKEFLAGS environment variable, in the order specified in the environment variable. It is
unspecified whether the internal macros defined in Internal Macros are accepted from this source.
3. The contents of the environment, excluding the MAKEFLAGS and SHELL variables and including the variables with null
values.
4. Macros defined in the inference rules built into make.
Macro definitions from these sources shall not override macro definitions from a lower-numbered source. Macro definitions
from a single source (for example, the make utility command line, the MAKEFLAGS environment variable, or the other envi-
ronment variables) shall override previous macro definitions from the same source.
Macros defined in the makefile(s) shall override macro definitions that occur before them in the makefile(s) and macro
definitions from source 4. If the -e option is not specified, macros defined in the makefile(s) shall override macro def-
initions from source 3. Macros defined in the makefile(s) shall not override macro definitions from source 1 or source 2.
Before the makefile(s) are read, all of the make utility command line options (except -f and -p) and make utility command
line macro definitions (except any for the MAKEFLAGS macro), not already included in the MAKEFLAGS macro, shall be added
to the MAKEFLAGS macro, quoted in an implementation-defined manner such that when MAKEFLAGS is read by another instance
of the make command, the original macro's value is recovered. Other implementation-defined options and macros may also be
added to the MAKEFLAGS macro. If this modifies the value of the MAKEFLAGS macro, or, if the MAKEFLAGS macro is modified
at any subsequent time, the MAKEFLAGS environment variable shall be modified to match the new value of the MAKEFLAGS
macro. The result of setting MAKEFLAGS in the Makefile is unspecified.
Before the makefile(s) are read, all of the make utility command line macro definitions (except the MAKEFLAGS macro or
the SHELL macro) shall be added to the environment of make. Other implementation-defined variables may also be added to
the environment of make.
The SHELL macro shall be treated specially. It shall be provided by make and set to the pathname of the shell command
language interpreter (see sh ). The SHELL environment variable shall not affect the value of the SHELL macro. If SHELL is
defined in the makefile or is specified on the command line, it shall replace the original value of the SHELL macro, but
shall not affect the SHELL environment variable. Other effects of defining SHELL in the makefile or on the command line
are implementation-defined.
Inference Rules
Inference rules are formatted as follows:
target:
<tab>command
[<tab>command]...
line that does not begin with <tab> or #
The application shall ensure that the target portion is a valid target name (see Target Rules ) of the form .s2 or .s1.s2
(where .s1 and .s2 are suffixes that have been given as prerequisites of the .SUFFIXES special target and s1 and s2 do
not contain any slashes or periods.) If there is only one period in the target, it is a single-suffix inference rule.
Targets with two periods are double-suffix inference rules. Inference rules can have only one target before the colon.
The application shall ensure that the makefile does not specify prerequisites for inference rules; no characters other
than white space shall follow the colon in the first line, except when creating the empty rule, described below. Prereq-
uisites are inferred, as described below.
Inference rules can be redefined. A target that matches an existing inference rule shall overwrite the old inference
rule. An empty rule can be created with a command consisting of simply a semicolon (that is, the rule still exists and is
found during inference rule search, but since it is empty, execution has no effect). The empty rule can also be format-
ted as follows:
rule: ;
where zero or more <blank>s separate the colon and semicolon.
The make utility uses the suffixes of targets and their prerequisites to infer how a target can be made up-to-date. A
list of inference rules defines the commands to be executed. By default, make contains a built-in set of inference rules.
Additional rules can be specified in the makefile.
The special target .SUFFIXES contains as its prerequisites a list of suffixes that shall be used by the inference rules.
The order in which the suffixes are specified defines the order in which the inference rules for the suffixes are used.
New suffixes shall be appended to the current list by specifying a .SUFFIXES special target in the makefile. A .SUFFIXES
target with no prerequisites shall clear the list of suffixes. An empty .SUFFIXES target followed by a new .SUFFIXES list
is required to change the order of the suffixes.
Normally, the user would provide an inference rule for each suffix. The inference rule to update a target with a suffix
.s1 from a prerequisite with a suffix .s2 is specified as a target .s2.s1. The internal macros provide the means to spec-
ify general inference rules (see Internal Macros ).
When no target rule is found to update a target, the inference rules shall be checked. The suffix of the target ( .s1) to
be built is compared to the list of suffixes specified by the .SUFFIXES special targets. If the .s1 suffix is found in
.SUFFIXES, the inference rules shall be searched in the order defined for the first .s2.s1 rule whose prerequisite file (
$*.s2) exists. If the target is out-of-date with respect to this prerequisite, the commands for that inference rule shall
be executed.
If the target to be built does not contain a suffix and there is no rule for the target, the single suffix inference
rules shall be checked. The single-suffix inference rules define how to build a target if a file is found with a name
that matches the target name with one of the single suffixes appended. A rule with one suffix .s2 is the definition of
how to build target from target.s2. The other suffix ( .s1) is treated as null.
A tilde ( '~' ) in the above rules refers to an SCCS file in the current directory. Thus, the rule .c~.o would transform
an SCCS C-language source file into an object file ( .o). Because the s. of the SCCS files is a prefix, it is incompati-
ble with make's suffix point of view. Hence, the '~' is a way of changing any file reference into an SCCS file refer-
ence.
Libraries
If a target or prerequisite contains parentheses, it shall be treated as a member of an archive library. For the lib(
member .o) expression lib refers to the name of the archive library and member .o to the member name. The application
shall ensure that the member is an object file with the .o suffix. The modification time of the expression is the modifi-
cation time for the member as kept in the archive library; see ar . The .a suffix shall refer to an archive library. The
.s2.a rule shall be used to update a member in the library from a file with a suffix .s2.
Internal Macros
The make utility shall maintain five internal macros that can be used in target and inference rules. In order to clearly
define the meaning of these macros, some clarification of the terms target rule, inference rule, target, and prerequisite
is necessary.
Target rules are specified by the user in a makefile for a particular target. Inference rules are user-specified or make-
specified rules for a particular class of target name. Explicit prerequisites are those prerequisites specified in a
makefile on target lines. Implicit prerequisites are those prerequisites that are generated when inference rules are
used. Inference rules are applied to implicit prerequisites or to explicit prerequisites that do not have target rules
defined for them in the makefile. Target rules are applied to targets specified in the makefile.
Before any target in the makefile is updated, each of its prerequisites (both explicit and implicit) shall be updated.
This shall be accomplished by recursively processing each prerequisite. Upon recursion, each prerequisite shall become a
target itself. Its prerequisites in turn shall be processed recursively until a target is found that has no prerequi-
sites, at which point the recursion stops. The recursion shall then back up, updating each target as it goes.
In the definitions that follow, the word target refers to one of:
* A target specified in the makefile
* An explicit prerequisite specified in the makefile that becomes the target when make processes it during recursion
* An implicit prerequisite that becomes a target when make processes it during recursion
In the definitions that follow, the word prerequisite refers to one of the following:
* An explicit prerequisite specified in the makefile for a particular target
* An implicit prerequisite generated as a result of locating an appropriate inference rule and corresponding file that
matches the suffix of the target
The five internal macros are:
$@ The $@ shall evaluate to the full target name of the current target, or the archive filename part of a library ar-
chive target. It shall be evaluated for both target and inference rules.
For example, in the .c.a inference rule, $@ represents the out-of-date .a file to be built. Similarly, in a makefile tar-
get rule to build lib.a from file.c, $@ represents the out-of-date lib.a.
$% The $% macro shall be evaluated only when the current target is an archive library member of the form libname(
member .o). In these cases, $@ shall evaluate to libname and $% shall evaluate to member .o. The $% macro shall be
evaluated for both target and inference rules.
For example, in a makefile target rule to build lib.a( file.o), $% represents file.o, as opposed to $@, which represents
lib.a.
$? The $? macro shall evaluate to the list of prerequisites that are newer than the current target. It shall be eval-
uated for both target and inference rules.
For example, in a makefile target rule to build prog from file1.o, file2.o, and file3.o, and where prog is not out-of-
date with respect to file1.o, but is out-of-date with respect to file2.o and file3.o, $? represents file2.o and file3.o.
$< In an inference rule, the $< macro shall evaluate to the filename whose existence allowed the inference rule to be
chosen for the target. In the .DEFAULT rule, the $< macro shall evaluate to the current target name. The meaning
of the $< macro shall be otherwise unspecified.
For example, in the .c.a inference rule, $< represents the prerequisite .c file.
$* The $* macro shall evaluate to the current target name with its suffix deleted. It shall be evaluated at least for
inference rules.
For example, in the .c.a inference rule, $*.o represents the out-of-date .o file that corresponds to the prerequisite .c
file.
Each of the internal macros has an alternative form. When an uppercase 'D' or 'F' is appended to any of the macros, the
meaning shall be changed to the directory part for 'D' and filename part for 'F' . The directory part is the path prefix
of the file without a trailing slash; for the current directory, the directory part is '.' . When the $? macro contains
more than one prerequisite filename, the $(?D) and $(?F) (or ${?D} and ${?F}) macros expand to a list of directory name
parts and filename parts respectively.
For the target lib( member .o) and the s2.a rule, the internal macros shall be defined as:
$< member .s2
$* member
$@ lib
$? member .s2
$% member .o
Default Rules
The default rules for make shall achieve results that are the same as if the following were used. Implementations that do
not support the C-Language Development Utilities option may omit CC, CFLAGS, YACC, YFLAGS, LEX, LFLAGS, LDFLAGS, and the
.c, .y, and .l inference rules. Implementations that do not support FORTRAN may omit FC, FFLAGS, and the .f inference
rules. Implementations may provide additional macros and rules.
SPECIAL TARGETS
.SCCS_GET: sccs $(SCCSFLAGS) get $(SCCSGETFLAGS) $@
.SUFFIXES: .o .c .y .l .a .sh .f .c~ .y~ .l~ .sh~ .f~
MACROS
MAKE=make
AR=ar
ARFLAGS=-rv
YACC=yacc
YFLAGS=
LEX=lex
LFLAGS=
LDFLAGS=
CC=c99
CFLAGS=-O
FC=fort77
FFLAGS=-O 1
GET=get
GFLAGS=
SCCSFLAGS=
SCCSGETFLAGS=-s
SINGLE SUFFIX RULES
.c:
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $<
.f:
$(FC) $(FFLAGS) $(LDFLAGS) -o $@ $<
.sh:
cp $< $@
chmod a+x $@
.c~:
$(GET) $(GFLAGS) -p $< > $*.c
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $*.c
.f~:
$(GET) $(GFLAGS) -p $< > $*.f
$(FC) $(FFLAGS) $(LDFLAGS) -o $@ $*.f
.sh~:
$(GET) $(GFLAGS) -p $< > $*.sh
cp $*.sh $@
chmod a+x $@
DOUBLE SUFFIX RULES
.c.o:
$(CC) $(CFLAGS) -c $<
.f.o:
$(FC) $(FFLAGS) -c $<
.y.o:
$(YACC) $(YFLAGS) $<
$(CC) $(CFLAGS) -c y.tab.c
rm -f y.tab.c
mv y.tab.o $@
.l.o:
$(LEX) $(LFLAGS) $<
$(CC) $(CFLAGS) -c lex.yy.c
rm -f lex.yy.c
mv lex.yy.o $@
.y.c:
$(YACC) $(YFLAGS) $<
mv y.tab.c $@
.l.c:
$(LEX) $(LFLAGS) $<
mv lex.yy.c $@
.c~.o:
$(GET) $(GFLAGS) -p $< > $*.c
$(CC) $(CFLAGS) -c $*.c
.f~.o:
$(GET) $(GFLAGS) -p $< > $*.f
$(FC) $(FFLAGS) -c $*.f
.y~.o:
$(GET) $(GFLAGS) -p $< > $*.y
$(YACC) $(YFLAGS) $*.y
$(CC) $(CFLAGS) -c y.tab.c
rm -f y.tab.c
mv y.tab.o $@
.l~.o:
$(GET) $(GFLAGS) -p $< > $*.l
$(LEX) $(LFLAGS) $*.l
$(CC) $(CFLAGS) -c lex.yy.c
rm -f lex.yy.c
mv lex.yy.o $@
.y~.c:
$(GET) $(GFLAGS) -p $< > $*.y
$(YACC) $(YFLAGS) $*.y
mv y.tab.c $@
.l~.c:
$(GET) $(GFLAGS) -p $< > $*.l
$(LEX) $(LFLAGS) $*.l
mv lex.yy.c $@
.c.a:
$(CC) -c $(CFLAGS) $<
$(AR) $(ARFLAGS) $@ $*.o
rm -f $*.o
.f.a:
$(FC) -c $(FFLAGS) $<
$(AR) $(ARFLAGS) $@ $*.o
rm -f $*.o
EXIT STATUS
When the -q option is specified, the make utility shall exit with one of the following values:
0 Successful completion.
1 The target was not up-to-date.
>1 An error occurred.
When the -q option is not specified, the make utility shall exit with one of the following values:
0 Successful completion.
>0 An error occurred.
CONSEQUENCES OF ERRORS
Default.
The following sections are informative.
APPLICATION USAGE
If there is a source file (such as ./source.c) and there are two SCCS files corresponding to it ( ./s.source.c and
./SCCS/s.source.c), on XSI-conformant systems make uses the SCCS file in the current directory. However, users are
advised to use the underlying SCCS utilities ( admin, delta, get, and so on) or the sccs utility for all source files in
a given directory. If both forms are used for a given source file, future developers are very likely to be confused.
It is incumbent upon portable makefiles to specify the .POSIX special target in order to guarantee that they are not
affected by local extensions.
The -k and -S options are both present so that the relationship between the command line, the MAKEFLAGS variable, and the
makefile can be controlled precisely. If the k flag is passed in MAKEFLAGS and a command is of the form:
$(MAKE) -S foo
then the default behavior is restored for the child make.
When the -n option is specified, it is always added to MAKEFLAGS . This allows a recursive make -n target to be used to
see all of the action that would be taken to update target.
Because of widespread historical practice, interpreting a '#' number sign inside a variable as the start of a comment has
the unfortunate side effect of making it impossible to place a number sign in a variable, thus forbidding something like:
CFLAGS = "-D COMMENT_CHAR='#'"
Many historical make utilities stop chaining together inference rules when an intermediate target is nonexistent. For
example, it might be possible for a make to determine that both .y.c and .c.o could be used to convert a .y to a .o.
Instead, in this case, make requires the use of a .y.o rule.
The best way to provide portable makefiles is to include all of the rules needed in the makefile itself. The rules pro-
vided use only features provided by other parts of this volume of IEEE Std 1003.1-2001. The default rules include rules
for optional commands in this volume of IEEE Std 1003.1-2001. Only rules pertaining to commands that are provided are
needed in an implementation's default set.
Macros used within other macros are evaluated when the new macro is used rather than when the new macro is defined.
Therefore:
MACRO = value1NEW = $(MACRO)
MACRO = value2
target:
echo $(NEW)
would produce value2 and not value1 since NEW was not expanded until it was needed in the echo command line.
Some historical applications have been known to intermix target_name and macro=name operands on the command line, expect-
ing that all of the macros are processed before any of the targets are dealt with. Conforming applications do not do
this, although some backwards-compatibility support may be included in some implementations.
The following characters in filenames may give trouble: '=', ':', '`', '", and '@' . For inference rules, the description
of $< and $? seem similar. However, an example shows the minor difference. In a makefile containing:
foo.o: foo.h
if foo.h is newer than foo.o, yet foo.c is older than foo.o, the built-in rule to make foo.o from foo.c is used, with $<
equal to foo.c and $? equal to foo.h. If foo.c is also newer than foo.o, $< is equal to foo.c and $? is equal to foo.h
foo.c.
EXAMPLES
1. The following command:
make
makes the first target found in the makefile.
2. The following command:
make junk
makes the target junk.
3. The following makefile says that pgm depends on two files, a.o and b.o, and that they in turn depend on their corre-
sponding source files ( a.c and b.c), and a common file incl.h:
pgm: a.o b.o
c99 a.o b.o -o pgm
a.o: incl.h a.c
c99 -c a.c
b.o: incl.h b.c
c99 -c b.c
4. An example for making optimized .o files from .c files is:
.c.o:
c99 -c -O $*.c
or:
.c.o:
c99 -c -O $<
5. The most common use of the archive interface follows. Here, it is assumed that the source files are all C-language
source:
lib: lib(file1.o) lib(file2.o) lib(file3.o)
@echo lib is now up-to-date
The .c.a rule is used to make file1.o, file2.o, and file3.o and insert them into lib.
The treatment of escaped <newline>s throughout the makefile is historical practice. For example, the inference rule:
.c.o\
:
works, and the macro:
f= bar baz\
biz
a:
echo ==$f==
echoes "==bar baz biz==" .
If $? were:
/usr/include/stdio.h /usr/include/unistd.h foo.h
then $(?D) would be:
/usr/include /usr/include .
and $(?F) would be:
stdio.h unistd.h foo.h
6. The contents of the built-in rules can be viewed by running:
make -p -f /dev/null 2>/dev/null
RATIONALE
The make utility described in this volume of IEEE Std 1003.1-2001 is intended to provide the means for changing portable
source code into executables that can be run on an IEEE Std 1003.1-2001-conforming system. It reflects the most common
features present in System V and BSD makes.
Historically, the make utility has been an especially fertile ground for vendor and research organization-specific syntax
modifications and extensions. Examples include:
* Syntax supporting parallel execution (such as from various multi-processor vendors, GNU, and others)
* Additional "operators" separating targets and their prerequisites (System V, BSD, and others)
* Specifying that command lines containing the strings "${MAKE}" and "$(MAKE)" are executed when the -n option is speci-
fied (GNU and System V)
* Modifications of the meaning of internal macros when referencing libraries (BSD and others)
* Using a single instance of the shell for all of the command lines of the target (BSD and others)
* Allowing spaces as well as tabs to delimit command lines (BSD)
* Adding C preprocessor-style "include" and "ifdef" constructs (System V, GNU, BSD, and others)
* Remote execution of command lines (Sprite and others)
* Specifying additional special targets (BSD, System V, and most others)
Additionally, many vendors and research organizations have rethought the basic concepts of make, creating vastly
extended, as well as completely new, syntaxes. Each of these versions of make fulfills the needs of a different community
of users; it is unreasonable for this volume of IEEE Std 1003.1-2001 to require behavior that would be incompatible (and
probably inferior) to historical practice for such a community.
In similar circumstances, when the industry has enough sufficiently incompatible formats as to make them irreconcilable,
this volume of IEEE Std 1003.1-2001 has followed one or both of two courses of action. Commands have been renamed (
cksum, echo, and pax) and/or command line options have been provided to select the desired behavior ( grep, od, and pax).
Because the syntax specified for the make utility is, by and large, a subset of the syntaxes accepted by almost all ver-
sions of make, it was decided that it would be counter-productive to change the name. And since the makefile itself is a
basic unit of portability, it would not be completely effective to reserve a new option letter, such as make -P, to
achieve the portable behavior. Therefore, the special target .POSIX was added to the makefile, allowing users to specify
"standard" behavior. This special target does not preclude extensions in the make utility, nor does it preclude such
extensions being used by the makefile specifying the target; it does, however, preclude any extensions from being applied
that could alter the behavior of previously valid syntax; such extensions must be controlled via command line options or
new special targets. It is incumbent upon portable makefiles to specify the .POSIX special target in order to guarantee
that they are not affected by local extensions.
The portable version of make described in this reference page is not intended to be the state-of-the-art software genera-
tion tool and, as such, some newer and more leading-edge features have not been included. An attempt has been made to
describe the portable makefile in a manner that does not preclude such extensions as long as they do not disturb the por-
table behavior described here.
When the -n option is specified, it is always added to MAKEFLAGS . This allows a recursive make -n target to be used to
see all of the action that would be taken to update target.
The definition of MAKEFLAGS allows both the System V letter string and the BSD command line formats. The two formats are
sufficiently different to allow implementations to support both without ambiguity.
Early proposals stated that an "unquoted" number sign was treated as the start of a comment. The make utility does not
pay any attention to quotes. A number sign starts a comment regardless of its surroundings.
The text about "other implementation-defined pathnames may also be tried" in addition to ./makefile and ./Makefile is to
allow such extensions as SCCS/s.Makefile and other variations. It was made an implementation-defined requirement (as
opposed to unspecified behavior) to highlight surprising implementations that might select something unexpected like
/etc/Makefile. XSI-conformant systems also try ./s.makefile, SCCS/s.makefile, ./s.Makefile, and SCCS/s.Makefile.
Early proposals contained the macro NPROC as a means of specifying that make should use n processes to do the work
required. While this feature is a valuable extension for many systems, it is not common usage and could require other
non-trivial extensions to makefile syntax. This extension is not required by this volume of IEEE Std 1003.1-2001, but
could be provided as a compatible extension. The macro PARALLEL is used by some historical systems with essentially the
same meaning (but without using a name that is a common system limit value). It is suggested that implementors recognize
the existing use of NPROC and/or PARALLEL as extensions to make.
The default rules are based on System V. The default CC= value is c99 instead of cc because this volume of
IEEE Std 1003.1-2001 does not standardize the utility named cc. Thus, every conforming application would be required to
define CC= c99 to expect to run. There is no advantage conferred by the hope that the makefile might hit the "preferred"
compiler because this cannot be guaranteed to work. Also, since the portable makescript can only use the c99 options, no
advantage is conferred in terms of what the script can do. It is a quality-of-implementation issue as to whether c99 is
as valuable as cc.
The -d option to make is frequently used to produce debugging information, but is too implementation-defined to add to
this volume of IEEE Std 1003.1-2001.
The -p option is not passed in MAKEFLAGS on most historical implementations and to change this would cause many implemen-
tations to break without sufficiently increased portability.
Commands that begin with a plus sign ( '+' ) are executed even if the -n option is present. Based on the GNU version of
make, the behavior of -n when the plus-sign prefix is encountered has been extended to apply to -q and -t as well. How-
ever, the System V convention of forcing command execution with -n when the command line of a target contains either of
the strings "$(MAKE)" or "${MAKE}" has not been adopted. This functionality appeared in early proposals, but the danger
of this approach was pointed out with the following example of a portion of a makefile:
subdir:
cd subdir; rm all_the_files; $(MAKE)
The loss of the System V behavior in this case is well-balanced by the safety afforded to other makefiles that were not
aware of this situation. In any event, the command line plus-sign prefix can provide the desired functionality.
The double colon in the target rule format is supported in BSD systems to allow more than one target line containing the
same target name to have commands associated with it. Since this is not functionality described in the SVID or XPG3 it
has been allowed as an extension, but not mandated.
The default rules are provided with text specifying that the built-in rules shall be the same as if the listed set were
used. The intent is that implementations should be able to use the rules without change, but will be allowed to alter
them in ways that do not affect the primary behavior.
The best way to provide portable makefiles is to include all of the rules needed in the makefile itself. The rules pro-
vided use only features provided by other portions of this volume of IEEE Std 1003.1-2001. The default rules include
rules for optional commands in this volume of IEEE Std 1003.1-2001. Only rules pertaining to commands that are provided
are needed in the default set of an implementation.
One point of discussion was whether to drop the default rules list from this volume of IEEE Std 1003.1-2001. They provide
convenience, but do not enhance portability of applications. The prime benefit is in portability of users who wish to
type make command and have the command build from a command.c file.
The historical MAKESHELL feature was omitted. In some implementations it is used to let a user override the shell to be
used to run make commands. This was confusing; for a portable make, the shell should be chosen by the makefile writer or
specified on the make command line and not by a user running make.
The make utilities in most historical implementations process the prerequisites of a target in left-to-right order, and
the makefile format requires this. It supports the standard idiom used in many makefiles that produce yacc programs; for
example:
foo: y.tab.o lex.o main.o
$(CC) $(CFLAGS) -o $@ t.tab.o lex.o main.o
In this example, if make chose any arbitrary order, the lex.o might not be made with the correct y.tab.h. Although there
may be better ways to express this relationship, it is widely used historically. Implementations that desire to update
prerequisites in parallel should require an explicit extension to make or the makefile format to accomplish it, as
described previously.
The algorithm for determining a new entry for target rules is partially unspecified. Some historical makes allow blank,
empty, or comment lines within the collection of commands marked by leading <tab>s. A conforming makefile must ensure
that each command starts with a <tab>, but implementations are free to ignore blank, empty, and comment lines without
triggering the start of a new entry.
The ASYNCHRONOUS EVENTS section includes having SIGTERM and SIGHUP, along with the more traditional SIGINT and SIGQUIT,
remove the current target unless directed not to do so. SIGTERM and SIGHUP were added to parallel other utilities that
have historically cleaned up their work as a result of these signals. When make receives any signal other than SIGQUIT,
it is required to resend itself the signal it received so that it exits with a status that reflects the signal. The
results from SIGQUIT are partially unspecified because, on systems that create core files upon receipt of SIGQUIT, the
core from make would conflict with a core file from the command that was running when the SIGQUIT arrived. The main con-
cern was to prevent damaged files from appearing up-to-date when make is rerun.
The .PRECIOUS special target was extended to affect all targets globally (by specifying no prerequisites). The .IGNORE
and .SILENT special targets were extended to allow prerequisites; it was judged to be more useful in some cases to be
able to turn off errors or echoing for a list of targets than for the entire makefile. These extensions to make in System
V were made to match historical practice from the BSD make.
Macros are not exported to the environment of commands to be run. This was never the case in any historical make and
would have serious consequences. The environment is the same as the environment to make except that MAKEFLAGS and macros
defined on the make command line are added.
Some implementations do not use system() for all command lines, as required by the portable makefile format; as a perfor-
mance enhancement, they select lines without shell metacharacters for direct execution by execve(). There is no require-
ment that system() be used specifically, but merely that the same results be achieved. The metacharacters typically used
to bypass the direct execve() execution have been any of:
= | ^ ( ) ; & < > * ? [ ] : $ ` ' " \ \n
The default in some advanced versions of make is to group all the command lines for a target and execute them using a
single shell invocation; the System V method is to pass each line individually to a separate shell. The single-shell
method has the advantages in performance and the lack of a requirement for many continued lines. However, converting to
this newer method has caused portability problems with many historical makefiles, so the behavior with the POSIX makefile
is specified to be the same as that of System V. It is suggested that the special target .ONESHELL be used as an imple-
mentation extension to achieve the single-shell grouping for a target or group of targets.
Novice users of make have had difficulty with the historical need to start commands with a <tab>. Since it is often dif-
ficult to discern differences between <tab>s and <space>s on terminals or printed listings, confusing bugs can arise. In
early proposals, an attempt was made to correct this problem by allowing leading <blank>s instead of <tab>s. However,
implementors reported many makefiles that failed in subtle ways following this change, and it is difficult to implement a
make that unambiguously can differentiate between macro and command lines. There is extensive historical practice of
allowing leading spaces before macro definitions. Forcing macro lines into column 1 would be a significant backwards-com-
patibility problem for some makefiles. Therefore, historical practice was restored.
The System V INCLUDE feature was considered, but not included. This would treat a line that began in the first column and
contained INCLUDE <filename> as an indication to read <filename> at that point in the makefile. This is difficult to use
in a portable way, and it raises concerns about nesting levels and diagnostics. System V, BSD, GNU, and others have used
different methods for including files.
The System V dynamic dependency feature was not included. It would support:
cat: $$@.c
that would expand to;
cat: cat.c
This feature exists only in the new version of System V make and, while useful, is not in wide usage. This means that
macros are expanded twice for prerequisites: once at makefile parse time and once at target update time.
Consideration was given to adding metarules to the POSIX make. This would make %.o: %.c the same as .c.o:. This is quite
useful and available from some vendors, but it would cause too many changes to this make to support. It would have intro-
duced rule chaining and new substitution rules. However, the rules for target names have been set to reserve the '%' and
'' characters. These are traditionally used to implement metarules and quoting of target names, respectively. Implemen-
tors are strongly encouraged to use these characters only for these purposes.
A request was made to extend the suffix delimiter character from a period to any character. The metarules feature in
newer makes solves this problem in a more general way. This volume of IEEE Std 1003.1-2001 is staying with the more con-
servative historical definition.
The standard output format for the -p option is not described because it is primarily a debugging option and because the
format is not generally useful to programs. In historical implementations the output is not suitable for use in generat-
ing makefiles. The -p format has been variable across historical implementations. Therefore, the definition of -p was
only to provide a consistently named option for obtaining make script debugging information.
Some historical implementations have not cleared the suffix list with -r.
Implementations should be aware that some historical applications have intermixed target_name and macro= value operands
on the command line, expecting that all of the macros are processed before any of the targets are dealt with. Conforming
applications do not do this, but some backwards-compatibility support may be warranted.
Empty inference rules are specified with a semicolon command rather than omitting all commands, as described in an early
proposal. The latter case has no traditional meaning and is reserved for implementation extensions, such as in GNU make.
FUTURE DIRECTIONS
None.
SEE ALSO
Shell Command Language, ar, c99, get, lex, sccs, sh, yacc, the System Interfaces volume of IEEE Std 1003.1-2001, exec,
system()
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for
Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copy-
right (C) 2001-2003 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any
discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group
Standard is the referee document. The original Standard can be obtained online at http://www.open-
group.org/unix/online.html .
IEEE/The Open Group 2003 MAKE(1P)
