MRTG-MIBHELP(1)                                               mrtg                                               MRTG-MIBHELP(1)



NAME
       mrtg-mibhelp - A Table of some interesting OIDs

OVERVIEW
       This File Contains a collection of interesting MIB Entries ...  mrtg knows about their names ... depending on the ASN.1
       Syntax you may have to put gauge into the Options[]: parameter.

       For information about how to create a Target[]: parameter which references these MIB entries, please consult mrtg-
       reference.

MIB LIST
   ifOperStatus
        Descriptor:            ifOperStatus
        Identifier:            1.3.6.1.2.1.2.2.1.8
        ASN.1 Syntax:          INTEGER
        Enumeration:           up 1, down 2, testing 3

       The current operational state of the interface.  The testing(3) state indicates that no operational packets can be
       passed.

   ifAdminStatus
        Descriptor:            ifAdminStatus
        Identifier:            1.3.6.1.2.1.2.2.1.7
        ASN.1 Syntax:          INTEGER
        Enumeration:           up 1, down 2, testing 3

       The current administrative state of the interface.  The testing(3) state indicates that no operational packets can be
       passed.

   ifInOctets
        Descriptor:            ifInOctets
        Identifier:            1.3.6.1.2.1.2.2.1.10
        ASN.1 Syntax:          Counter32

       The total number of octets received on the interface, including framing characters.

   ifInUcastPkts
        Descriptor:            ifInUcastPkts
        Identifier:            1.3.6.1.2.1.2.2.1.11
        ASN.1 Syntax:          Counter32

       The number of subnetwork-unicast packets delivered to a higher-layer protocol.

   ifInNUcastPkts
        Descriptor:            ifInNUcastPkts
        Identifier:            1.3.6.1.2.1.2.2.1.12
        ASN.1 Syntax:          Counter32

       The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer
       protocol.

   ifInDiscards
        Descriptor:            ifInDiscards
        Identifier:            1.3.6.1.2.1.2.2.1.13
        ASN.1 Syntax:          Counter32

       The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their
       being deliverable to a higher-layer protocol.  One possible reason for discarding such a packet could be to free up
       buffer space.

   ifInErrors
        Descriptor:            ifInErrors
        Identifier:            1.3.6.1.2.1.2.2.1.14
        ASN.1 Syntax:          Counter32

       The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

   ifInUnknownProtos
        Descriptor:            ifInUnknownProtos
        Identifier:            1.3.6.1.2.1.2.2.1.15
        ASN.1 Syntax:          Counter32

       The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

   ifOutOctets
        Descriptor:            ifOutOctets
        Identifier:            1.3.6.1.2.1.2.2.1.16
        ASN.1 Syntax:          Counter32

       The total number of octets transmitted out of the interface, including framing characters.

   ifOutUcastPkts
        Descriptor:            ifOutUcastPkts
        Identifier:            1.3.6.1.2.1.2.2.1.17
        ASN.1 Syntax:          Counter32

       The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address,
       including those that were discarded or not sent.

   ifOutNUcastPkts
        Descriptor:             ifOutNUcastPkts
        Identifier:            1.3.6.1.2.1.2.2.1.18
        ASN.1 Syntax:          Counter32

       The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-
       broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

   ifOutDiscards
        Descriptor:             ifOutDiscards
        Identifier:            1.3.6.1.2.1.2.2.1.19
        ASN.1 Syntax:          Counter32

       The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their
       being transmitted.  One possible reason for discarding such a packet could be to free up buffer space.

   ifOutErrors
        Descriptor:             ifOutErrors
        Identifier:            1.3.6.1.2.1.2.2.1.20
        ASN.1 Syntax:          Counter32

       The number of outbound packets that could not be transmitted because of errors.

   ifOutQLen
        Descriptor:             ifOutQLen
        Identifier:            1.3.6.1.2.1.2.2.1.21
        ASN.1 Syntax:          Unsigned32

       The length of the output packet queue (in packets).

   frInOctets
       From: Simon Ferrett <simonfATworld.net>

        'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
        'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'

       which when used in the form:

        frInOctets.pp.dd&frOutOctets.pp.dd:communityATcisco.router

       where pp is the physical port that the frame relay pvc is defined on and dd is the DLCI of the pvc gets you the in and
       out octets for just that pvc.

   ifAdminHack and ifOperHack
       The return values of ifAdminStatus and ifOperStatus are not very useful for graphing. Use ifOperHack and ifAdminHack
       instead. They return 1 for UP and 0 otherwise.

       Note these are not real MIB entities but mrtg hacks

   PseudoZero and PseudoOne
       will return 0 and 1 respectively

       Note these are not real MIB entities but mrtg hacks

AUTHOR
       Tobias Oetiker <tobiAToetiker.ch>



2.16.4                                                     2010-05-17                                            MRTG-MIBHELP(1)