/* Void Main's man pages */
{ phpMan } else { main(); }
ntp_acc(5) ntp_acc(5)
NAME
ntp_acc - Access Control Options
ACCESS CONTROL SUPPORT
The ntpd daemon implements a general purpose access control list (ACL) containing address/match entries sorted first by
increasing address values and then by increasing mask values. A match occurs when the bitwise AND of the mask and the
packet source address is equal to the bitwise AND of the mask and address in the list. The list is searched in order with
the last match found defining the restriction flags associated with the entry.
An example may clarify how it works. Our campus has two class-B networks, 128.4 for the ECE and CIS departments and
128.175 for the rest of campus. Let's assume (not true!) that subnet 128.4.1 homes critical services like class rosters
and spread sheets. A suitable ACL might be
restrict default nopeer # deny new associations
restrict 128.175.0.0 mask 255.255.0.0 # allow campus access
restrict 128.4.0.0 mask 255.255.0.0 none # allow ECE and CIS access
restrict 128.4.1.0 mask 255.255.255.0 notrust # require authentication on subnet 1
restrict time.nist.gov # allow access
While this facility may be useful for keeping unwanted, broken or malicious clients from congesting innocent servers, it
should not be considered an alternative to the NTP authentication facilities. Source address based restrictions are eas-
ily circumvented by a determined cracker.
ACCESS CONTROL COMMANDS
discard [ average avg ][ minimum min ] [ monitor prob ]
Set the parameters of the rate control facility which protects the server from client abuse. If the limited flag
is present in the ACL, packets that violate these limits are discarded. If in addition the kod restriction is
present, a kiss-o'-death packet is returned.
average avg
Specify the minimum average interpacket spacing (minimum average headway time) in log2 s with default 3.
minimum min
Specify the minimum interpacket spacing (guard time) in log2 s with default 1.
monitor Specify the probability of discard for packets that overflow the rate-control window. This is a perfor-
mance optimization for servers with aggregate arrivals of 1000 packets per second or more.
restrict address [mask mask] [flag][...]
The address argument expressed in dotted-quad form is the address of a host or network. Alternatively, the
address argument can be a valid host DNS name. The mask argument expressed in dotted-quad form defaults to
255.255.255.255, meaning that the address is treated as the address of an individual host. A default entry
(address 0.0.0.0, mask 0.0.0.0) is always included and is always the first entry in the list. Note that the text
string default, with no mask option, may be used to indicate the default entry. Some flags have the effect to
deny service, some have the effect to enable service and some are conditioned by other flags. The flags. are not
orthogonal, in that more restrictive flags will often make less restrictive ones redundant. The flags that deny
service are classed in two categories, those that restrict time service and those that restrict informational
queries and attempts to do run-time reconfiguration of the server. One or more of the following flags may be
specified:
flake Discard received NTP packets with probability 0.1; that is, on average drop one packet in ten. This is
for testing and amusement. The name comes from Bob Braden's flakeway, which once did a similar thing for
early Internet testing.
ignore Deny packets of all kinds, including ntpq and ntpdc queries.
kod Send a kiss-o'-death (KoD) packet if the limited flag is present and a packet violates the rate limits
established by the discard command. KoD packets are themselves rate limited for each source address sepa-
rately. If this flag is not present, packets that violate the rate limits are discarded.
limited Deny time service if the packet violates the rate limits established by the discard command. This does
not apply to ntpq and ntpdc queries.
lowpriotrap
Declare traps set by matching hosts to be low priority. The number of traps a server can maintain is lim-
ited (the current limit is 3). Traps are usually assigned on a first come, first served basis, with later
trap requestors being denied service. This flag modifies the assignment algorithm by allowing low prior-
ity traps to be overridden by later requests for normal priority traps.
mssntp Enable Microsoft Windows MS-SNTP authentication using Active Directory services. Note: Potential users
should be aware that these services involve a TCP connection to another process that could potentially
block, denying services to other users. Therefore, this flag should be used only for a dedicated server
with no clients other than MS-SNTP.
nomodify
Deny ntpq and ntpdc queries which attempt to modify the state of the server (i.e., run time reconfigura-
tion). Queries which return information are permitted.
noquery Deny ntpq and ntpdc queries. Time service is not affected.
nopeer Deny packets that might mobilize an association unless authenticated. This includes broadcast, symmetric-
active and manycast server packets when a configured association does not exist. Note that this flag does
not apply to packets that do not attempt to mobilize an association.
noserve Deny all packets except ntpq and ntpdc queries.
notrap Decline to provide mode 6 control message trap service to matching hosts. The trap service is a subsystem
of the ntpdc control message protocol which is intended for use by remote event logging programs.
notrust Deny packets that are not cryptographically authenticated. Note carefully how this flag interacts with
the auth option of the enable and disable commands. If auth is enabled, which is the default, authentica-
tion is required for all packets that might mobilize an association. If auth is disabled, but the notrust
flag is not present, an association can be mobilized whether or not authenticated. If auth is disabled,
but the notrust flag is present, authentication is required only for the specified address/mask range.
ntpport
non-ntpport
This is actually a match algorithm modifier, rather than a restriction flag. Its presence causes the
restriction entry to be matched only if the source port in the packet is the standard NTP UDP port (123).
Both ntpport and non-ntpport may be specified. The ntpport is considered more specific and is sorted
later in the list.
version Deny packets that do not match the current NTP version.
Default restriction list entries with the flags ignore, ntpport, for each of the local host's interface addresses are
inserted into the table at startup to prevent the server from attempting to synchronize to its own time. A default entry
is also always present, though if it is otherwise unconfigured; no flags are associated with the default entry (i.e.,
everything besides your own NTP server is unrestricted).
SEE ALSO
ntp.conf(5)
HTML documentation in ntp-doc package.
This file was automatically generated from HTML source.
ntp_acc(5)
