RRDGRAPH_DATA(1)                                             rrdtool                                            RRDGRAPH_DATA(1)



NAME
       rrdgraph_data - preparing data for graphing in rrdtool graph

SYNOPSIS
       DEF:<vname>=<rrdfile>:<ds-name>:<CF>[:step=<step>][:start=<time>][:end=<time>][:reduce=<CF>]

       VDEF:vname=RPN expression

       CDEF:vname=RPN expression

DESCRIPTION
       These three instructions extract data values out of the RRD files, optionally altering them (think, for example, of a
       bytes to bits conversion). If so desired, you can also define variables containing useful information such as maximum,
       minimum etcetera. Two of the instructions use a language called RPN which is described in its own manual page.

       Variable names (vname) must be made up strings of the following characters "A-Z, a-z, 0-9, -,_" and a maximum length of
       255 characters.

       When picking variable names, make sure you do not choose a name that is already taken by an RPN operator. A safe bet it
       to use lowercase or mixed case names for variables since operators will always be in uppercase.

DEF
       DEF:<vname>=<rrdfile>:<ds-name>:<CF>[:step=<step>][:start=<time>][:end=<time>][:reduce=<CF>]

       This command fetches data from an RRD file.  The virtual name vname can then be used throughout the rest of the script.
       By default, an RRA which contains the correct consolidated data at an appropriate resolution will be chosen.  The
       resolution can be overridden with the --step option.  The resolution can again be overridden by specifying the step size.
       The time span of this data is the same as for the graph by default, you can override this by specifying start and end.
       Remember to escape colons in the time specification!

       If the resolution of the data is higher than the resolution of the graph, the data will be further consolidated. This may
       result in a graph that spans slightly more time than requested.  Ideally each point in the graph should correspond with
       one CDP from an RRA.  For instance, if your RRD has an RRA with a resolution of 1800 seconds per CDP, you should create
       an image with width 400 and time span 400*1800 seconds (use appropriate start and end times, such as "--start
       end-8days8hours").

       If consolidation needs to be done, the CF of the RRA specified in the DEF itself will be used to reduce the data density.
       This behavior can be changed using ":reduce=<CF>".  This optional parameter specifies the CF to use during the data
       reduction phase.

       Example:

               DEF:ds0=router.rrd:ds0:AVERAGE
               DEF:ds0weekly=router.rrd:ds0:AVERAGE:step=7200
               DEF:ds0weekly=router.rrd:ds0:AVERAGE:start=end-1h
               DEF:ds0weekly=router.rrd:ds0:AVERAGE:start=11\:00:end=start+1h

VDEF
       VDEF:vname=RPN expression

       This command returns a value and/or a time according to the RPN statements used. The resulting vname will, depending on
       the functions used, have a value and a time component.  When you use this vname in another RPN expression, you are
       effectively inserting its value just as if you had put a number at that place.  The variable can also be used in the
       various graph and print elements.

       Example: "VDEF:avg=mydata,AVERAGE"

       Note that currently only aggregation functions work in VDEF rpn expressions.  Patches to change this are welcome.

CDEF
       CDEF:vname=RPN expression

       This command creates a new set of data points (in memory only, not in the RRD file) out of one or more other data series.
       The RPN instructions are used to evaluate a mathematical function on each data point. The resulting vname can then be
       used further on in the script, just as if it were generated by a DEF instruction.

       Example: "CDEF:mydatabits=mydata,8,*"

About CDEF versus VDEF
       At some point in processing, RRDtool has gathered an array of rates ready to display.

       CDEF works on such an array.  For example, CDEF:new=ds0,8,* would multiply each of the array members by eight (probably
       transforming bytes into bits). The result is an array containing the new values.

       VDEF also works on such an array but in a different way.  For example, VDEF:max=ds0,MAXIMUM would scan each of the array
       members and store the maximum value.

   When do you use VDEF versus CDEF?
       Use CDEF to transform your data prior to graphing.  In the above example, we'd use a CDEF to transform bytes to bits
       before graphing the bits.

       You use a VDEF if you want max(1,5,3,2,4) to return five which would be displayed in the graph's legend (to answer, what
       was the maximum value during the graph period).

       If you want to apply 'complex' operations to the result of a VDEF you have to use a CDEF again since VDEFs only look like
       RPN expressions, they aren't really.

SEE ALSO
       rrdgraph gives an overview of how rrdtool graph works.  rrdgraph_data describes DEF,CDEF and VDEF in detail.
       rrdgraph_rpn describes the RPN language used in the ?DEF statements.  rrdgraph_graph page describes all of the graph and
       print functions.

       Make sure to read rrdgraph_examples for tips&tricks.

AUTHOR
       Program by Tobias Oetiker <tobiAToetiker.ch>

       This manual page by Alex van den Bogaerdt <alexATvandenbogaerdt.nl> with corrections and/or additions by several people



1.4.4                                                      2009-10-14                                           RRDGRAPH_DATA(1)