S_CLIENT(1)                                                  OpenSSL                                                 S_CLIENT(1)



NAME
       s_client - SSL/TLS client program

SYNOPSIS
       openssl s_client [-connect host:port] [-verify depth] [-cert filename] [-certform DER|PEM] [-key filename] [-keyform
       DER|PEM] [-pass arg] [-CApath directory] [-CAfile filename] [-reconnect] [-pause] [-showcerts] [-debug] [-msg]
       [-nbio_test] [-state] [-nbio] [-crlf] [-ign_eof] [-quiet] [-ssl2] [-ssl3] [-tls1] [-no_ssl2] [-no_ssl3] [-no_tls1]
       [-bugs] [-cipher cipherlist] [-starttls protocol] [-engine id] [-tlsextdebug] [-no_ticket] [-sess_out filename] [-sess_in
       filename] [-rand file(s)]

DESCRIPTION
       The s_client command implements a generic SSL/TLS client which connects to a remote host using SSL/TLS. It is a very
       useful diagnostic tool for SSL servers.

OPTIONS
       -connect host:port
           This specifies the host and optional port to connect to. If not specified then an attempt is made to connect to the
           local host on port 4433.

       -cert certname
           The certificate to use, if one is requested by the server. The default is not to use a certificate.

       -certform format
           The certificate format to use: DER or PEM. PEM is the default.

       -key keyfile
           The private key to use. If not specified then the certificate file will be used.

       -keyform format
           The private format to use: DER or PEM. PEM is the default.

       -pass arg
           the private key password source. For more information about the format of arg see the PASS PHRASE ARGUMENTS section
           in openssl(1).

       -verify depth
           The verify depth to use. This specifies the maximum length of the server certificate chain and turns on server
           certificate verification.  Currently the verify operation continues after errors so all the problems with a
           certificate chain can be seen. As a side effect the connection will never fail due to a server certificate verify
           failure.

       -CApath directory
           The directory to use for server certificate verification. This directory must be in "hash format", see verify for
           more information. These are also used when building the client certificate chain.

       -CAfile file
           A file containing trusted certificates to use during server authentication and to use when attempting to build the
           client certificate chain.

       -purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict,
       -policy -check_ss_sig
           Set various certificate chain valiadition option. See the verify manual page for details.

       -reconnect
           reconnects to the same server 5 times using the same session ID, this can be used as a test that session caching is
           working.

       -pause
           pauses 1 second between each read and write call.

       -showcerts
           display the whole server certificate chain: normally only the server certificate itself is displayed.

       -prexit
           print session information when the program exits. This will always attempt to print out information even if the
           connection fails. Normally information will only be printed out once if the connection succeeds. This option is
           useful because the cipher in use may be renegotiated or the connection may fail because a client certificate is
           required or is requested only after an attempt is made to access a certain URL. Note: the output produced by this
           option is not always accurate because a connection might never have been established.

       -state
           prints out the SSL session states.

       -debug
           print extensive debugging information including a hex dump of all traffic.

       -msg
           show all protocol messages with hex dump.

       -nbio_test
           tests non-blocking I/O

       -nbio
           turns on non-blocking I/O

       -crlf
           this option translated a line feed from the terminal into CR+LF as required by some servers.

       -ign_eof
           inhibit shutting down the connection when end of file is reached in the input.

       -quiet
           inhibit printing of session and certificate information.  This implicitly turns on -ign_eof as well.

       -psk_identity identity
           Use the PSK identity identity when using a PSK cipher suite.

       -psk key
           Use the PSK key key when using a PSK cipher suite. The key is given as a hexadecimal number without leading 0x, for
           example -psk 1a2b3c4d.

       -ssl2, -ssl3, -tls1, -no_ssl2, -no_ssl3, -no_tls1
           these options disable the use of certain SSL or TLS protocols. By default the initial handshake uses a method which
           should be compatible with all servers and permit them to use SSL v3, SSL v2 or TLS as appropriate.

           Unfortunately there are a lot of ancient and broken servers in use which cannot handle this technique and will fail
           to connect. Some servers only work if TLS is turned off with the -no_tls option others will only support SSL v2 and
           may need the -ssl2 option.

       -bugs
           there are several known bug in SSL and TLS implementations. Adding this option enables various workarounds.

       -cipher cipherlist
           this allows the cipher list sent by the client to be modified. Although the server determines which cipher suite is
           used it should take the first supported cipher in the list sent by the client. See the ciphers command for more
           information.

       -starttls protocol
           send the protocol-specific message(s) to switch to TLS for communication.  protocol is a keyword for the intended
           protocol.  Currently, the only supported keywords are "smtp", "pop3", "imap", and "ftp".

       -tlsextdebug
           print out a hex dump of any TLS extensions received from the server.

       -no_ticket
           disable RFC4507bis session ticket support.

       -sess_out filename
           output SSL session to filename

       -sess_in sess.pem
           load SSL session from filename. The client will attempt to resume a connection from this session.

       -engine id
           specifying an engine (by its unique id string) will cause s_client to attempt to obtain a functional reference to the
           specified engine, thus initialising it if needed. The engine will then be set as the default for all available
           algorithms.

       -rand file(s)
           a file or files containing random data used to seed the random number generator, or an EGD socket (see RAND_egd(3)).
           Multiple files can be specified separated by a OS-dependent character.  The separator is ; for MS-Windows, , for
           OpenVMS, and : for all others.

CONNECTED COMMANDS
       If a connection is established with an SSL server then any data received from the server is displayed and any key presses
       will be sent to the server. When used interactively (which means neither -quiet nor -ign_eof have been given), the
       session will be renegotiated if the line begins with an R, and if the line begins with a Q or if end of file is reached,
       the connection will be closed down.

NOTES
       s_client can be used to debug SSL servers. To connect to an SSL HTTP server the command:

        openssl s_client -connect servername:443

       would typically be used (https uses port 443). If the connection succeeds then an HTTP command can be given such as "GET
       /" to retrieve a web page.

       If the handshake fails then there are several possible causes, if it is nothing obvious like no client certificate then
       the -bugs, -ssl2, -ssl3, -tls1, -no_ssl2, -no_ssl3, -no_tls1 options can be tried in case it is a buggy server. In
       particular you should play with these options before submitting a bug report to an OpenSSL mailing list.

       A frequent problem when attempting to get client certificates working is that a web client complains it has no
       certificates or gives an empty list to choose from. This is normally because the server is not sending the clients
       certificate authority in its "acceptable CA list" when it requests a certificate. By using s_client the CA list can be
       viewed and checked. However some servers only request client authentication after a specific URL is requested. To obtain
       the list in this case it is necessary to use the -prexit option and send an HTTP request for an appropriate page.

       If a certificate is specified on the command line using the -cert option it will not be used unless the server
       specifically requests a client certificate. Therefor merely including a client certificate on the command line is no
       guarantee that the certificate works.

       If there are problems verifying a server certificate then the -showcerts option can be used to show the whole chain.

       Since the SSLv23 client hello cannot include compression methods or extensions these will only be supported if its use is
       disabled, for example by using the -no_sslv2 option.

BUGS
       Because this program has a lot of options and also because some of the techniques used are rather old, the C source of
       s_client is rather hard to read and not a model of how things should be done. A typical SSL client program would be much
       simpler.

       The -verify option should really exit if the server verification fails.

       The -prexit option is a bit of a hack. We should really report information whenever a session is renegotiated.

SEE ALSO
       sess_id(1), s_server(1), ciphers(1)



1.0.0e                                                     2009-06-26                                                S_CLIENT(1)