S_TIME(1)                                                    OpenSSL                                                   S_TIME(1)



NAME
       s_time - SSL/TLS performance timing program

SYNOPSIS
       openssl s_time [-connect host:port] [-www page] [-cert filename] [-key filename] [-CApath directory] [-CAfile filename]
       [-reuse] [-new] [-verify depth] [-nbio] [-time seconds] [-ssl2] [-ssl3] [-bugs] [-cipher cipherlist]

DESCRIPTION
       The s_client command implements a generic SSL/TLS client which connects to a remote host using SSL/TLS. It can request a
       page from the server and includes the time to transfer the payload data in its timing measurements. It measures the
       number of connections within a given timeframe, the amount of data transferred (if any), and calculates the average time
       spent for one connection.

OPTIONS
       -connect host:port
           This specifies the host and optional port to connect to.

       -www page
           This specifies the page to GET from the server. A value of '/' gets the index.htm[l] page. If this parameter is not
           specified, then s_time will only perform the handshake to establish SSL connections but not transfer any payload
           data.

       -cert certname
           The certificate to use, if one is requested by the server. The default is not to use a certificate. The file is in
           PEM format.

       -key keyfile
           The private key to use. If not specified then the certificate file will be used. The file is in PEM format.

       -verify depth
           The verify depth to use. This specifies the maximum length of the server certificate chain and turns on server
           certificate verification.  Currently the verify operation continues after errors so all the problems with a
           certificate chain can be seen. As a side effect the connection will never fail due to a server certificate verify
           failure.

       -CApath directory
           The directory to use for server certificate verification. This directory must be in "hash format", see verify for
           more information. These are also used when building the client certificate chain.

       -CAfile file
           A file containing trusted certificates to use during server authentication and to use when attempting to build the
           client certificate chain.

       -new
           performs the timing test using a new session ID for each connection.  If neither -new nor -reuse are specified, they
           are both on by default and executed in sequence.

       -reuse
           performs the timing test using the same session ID; this can be used as a test that session caching is working. If
           neither -new nor -reuse are specified, they are both on by default and executed in sequence.

       -nbio
           turns on non-blocking I/O.

       -ssl2, -ssl3
           these options disable the use of certain SSL or TLS protocols. By default the initial handshake uses a method which
           should be compatible with all servers and permit them to use SSL v3, SSL v2 or TLS as appropriate.  The timing
           program is not as rich in options to turn protocols on and off as the s_client(1) program and may not connect to all
           servers.

           Unfortunately there are a lot of ancient and broken servers in use which cannot handle this technique and will fail
           to connect. Some servers only work if TLS is turned off with the -ssl3 option; others will only support SSL v2 and
           may need the -ssl2 option.

       -bugs
           there are several known bug in SSL and TLS implementations. Adding this option enables various workarounds.

       -cipher cipherlist
           this allows the cipher list sent by the client to be modified. Although the server determines which cipher suite is
           used it should take the first supported cipher in the list sent by the client.  See the ciphers(1) command for more
           information.

       -time length
           specifies how long (in seconds) s_time should establish connections and optionally transfer payload data from a
           server. Server and client performance and the link speed determine how many connections s_time can establish.

NOTES
       s_client can be used to measure the performance of an SSL connection.  To connect to an SSL HTTP server and get the
       default page the command

        openssl s_time -connect servername:443 -www / -CApath yourdir -CAfile yourfile.pem -cipher commoncipher [-ssl3]

       would typically be used (https uses port 443). 'commoncipher' is a cipher to which both client and server can agree, see
       the ciphers(1) command for details.

       If the handshake fails then there are several possible causes, if it is nothing obvious like no client certificate then
       the -bugs, -ssl2, -ssl3 options can be tried in case it is a buggy server. In particular you should play with these
       options before submitting a bug report to an OpenSSL mailing list.

       A frequent problem when attempting to get client certificates working is that a web client complains it has no
       certificates or gives an empty list to choose from. This is normally because the server is not sending the clients
       certificate authority in its "acceptable CA list" when it requests a certificate. By using s_client(1) the CA list can be
       viewed and checked. However some servers only request client authentication after a specific URL is requested. To obtain
       the list in this case it is necessary to use the -prexit option of s_client(1) and send an HTTP request for an
       appropriate page.

       If a certificate is specified on the command line using the -cert option it will not be used unless the server
       specifically requests a client certificate. Therefor merely including a client certificate on the command line is no
       guarantee that the certificate works.

BUGS
       Because this program does not have all the options of the s_client(1) program to turn protocols on and off, you may not
       be able to measure the performance of all protocols with all servers.

       The -verify option should really exit if the server verification fails.

SEE ALSO
       s_client(1), s_server(1), ciphers(1)



1.0.0e                                                     2004-01-08                                                  S_TIME(1)