phpMan

/* Void Main's man pages */

{ phpMan } else { main(); }

SCCS(1P) POSIX Programmer's Manual SCCS(1P)

PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (con-
sult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on
Linux.

NAME
sccs - front end for the SCCS subsystem (DEVELOPMENT)

SYNOPSIS
sccs [-r][-d path][-p path] command [options...][operands...]

DESCRIPTION
The sccs utility is a front end to the SCCS programs. It also includes the capability to run set-user-id to another user
to provide additional protection.

The sccs utility shall invoke the specified command with the specified options and operands. By default, each of the op-
erands shall be modified by prefixing it with the string "SCCS/s." .

The command can be the name of one of the SCCS utilities in this volume of IEEE Std 1003.1-2001 ( admin, delta, get, prs,
rmdel, sact, unget, val, or what) or one of the pseudo-utilities listed in the EXTENDED DESCRIPTION section.

OPTIONS
The sccs utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax
Guidelines, except that options operands are actually options to be passed to the utility named by command. When the
portion of the command:

command [options ... ] [operands ... ]

is considered, all of the pseudo-utilities used as command shall support the Utility Syntax Guidelines. Any of the other
SCCS utilities that can be invoked in this manner support the Guidelines to the extent indicated by their individual
OPTIONS sections.

The following options shall be supported preceding the command operand:

-d path
A pathname of a directory to be used as a root directory for the SCCS files. The default shall be the current
directory. The -d option shall take precedence over the PROJECTDIR variable. See -p.

-p path
A pathname of a directory in which the SCCS files are located. The default shall be the SCCS directory.

The -p option differs from the -d option in that the -d option-argument shall be prefixed to the entire pathname and the
-p option-argument shall be inserted before the final component of the pathname. For example:

sccs -d /x -p y get a/b

converts to:

get /x/a/y/s.b

This allows the creation of aliases such as:

alias syssccs="sccs -d /usr/src"

which is used as:

syssccs get cmd/who.c

-r Invoke command with the real user ID of the process, not any effective user ID that the sccs utility is set to.
Certain commands ( admin, check, clean, diffs, info, rmdel, and tell) cannot be run set-user-ID by all users,
since this would allow anyone to change the authorizations. These commands are always run as the real user.

OPERANDS
The following operands shall be supported:

command
An SCCS utility name or the name of one of the pseudo-utilities listed in the EXTENDED DESCRIPTION section.

options
An option or option-argument to be passed to command.

operands
An operand to be passed to command.

STDIN
See the utility description for the specified command.

INPUT FILES
See the utility description for the specified command.

ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of sccs:

LANG Provide a default value for the internationalization variables that are unset or null. (See the Base Definitions
volume of IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables for the precedence of international-
ization variables used to determine the values of locale categories.)

LC_ALL If set to a non-empty string value, override the values of all the other internationalization variables.

LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-
byte as opposed to multi-byte characters in arguments and input files).

LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diagnostic messages written to stan-
dard error.

NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES .

PROJECTDIR

Provide a default value for the -d path option. If the value of PROJECTDIR begins with a slash, it shall be con-
sidered an absolute pathname; otherwise, the value of PROJECTDIR is treated as a user name and that user's initial
working directory shall be examined for a subdirectory src or source. If such a directory is found, it shall be
used. Otherwise, the value shall be used as a relative pathname.

Additional environment variable effects may be found in the utility description for the specified command.

ASYNCHRONOUS EVENTS
Default.

STDOUT
See the utility description for the specified command.

STDERR
See the utility description for the specified command.

OUTPUT FILES
See the utility description for the specified command.

EXTENDED DESCRIPTION
The following pseudo-utilities shall be supported as command operands. All options referred to in the following list are
values given in the options operands following command.

check Equivalent to info, except that nothing shall be printed if nothing is being edited, and a non-zero exit status
shall be returned if anything is being edited. The intent is to have this included in an "install" entry in a
makefile to ensure that everything is included into the SCCS file before a version is installed.

clean Remove everything from the current directory that can be recreated from SCCS files, but do not remove any files
being edited. If the -b option is given, branches shall be ignored in the determination of whether they are being
edited; this is dangerous if branches are kept in the same directory.

create Create an SCCS file, taking the initial contents from the file of the same name. Any options to admin are
accepted. If the creation is successful, the original files shall be renamed by prefixing the basenames with a
comma. These renamed files should be removed after it has been verified that the SCCS files have been created suc-
cessfully.

delget Perform a delta on the named files and then get new versions. The new versions shall have ID keywords expanded
and shall not be editable. Any -m, -p, -r, -s, and -y options shall be passed to delta, and any -b, -c, -e, -i,
-k, -l, -s, and -x options shall be passed to get.

deledit
Equivalent to delget, except that the get phase shall include the -e option. This option is useful for making a
checkpoint of the current editing phase. The same options shall be passed to delta as described above, and all the
options listed for get above except -e shall be passed to edit.

diffs Write a difference listing between the current version of the files checked out for editing and the versions in
SCCS format. Any -r, -c, -i, -x, and -t options shall be passed to get; any -l, -s, -e, -f, -h, and -b options
shall be passed to diff. A -C option shall be passed to diff as -c.

edit Equivalent to get -e.

fix Remove the named delta, but leave a copy of the delta with the changes that were in it. It is useful for fixing
small compiler bugs, and so on. The application shall ensure that it is followed by a -r SID option. Since fix
does not leave audit trails, it should be used carefully.

info Write a listing of all files being edited. If the -b option is given, branches (that is, SIDs with two or fewer
components) shall be ignored. If a -u user option is given, then only files being edited by the named user shall
be listed. A -U option shall be equivalent to -u< current user>.

print Write out verbose information about the named files, equivalent to sccs prs.

tell Write a <newline>-separated list of the files being edited to standard output. Takes the -b, -u, and -U options
like info and check.

unedit This is the opposite of an edit or a get -e. It should be used with caution, since any changes made since the get
are lost.

EXIT STATUS
The following exit values shall be returned:

0 Successful completion.

>0 An error occurred.

CONSEQUENCES OF ERRORS
Default.

The following sections are informative.

APPLICATION USAGE
Many of the SCCS utilities take directory names as operands as well as specific filenames. The pseudo-utilities supported
by sccs are not described as having this capability, but are not prohibited from doing so.

EXAMPLES
1. To get a file for editing, edit it and produce a new delta:

sccs get -e file.c
ex file.c
sccs delta file.c

2. To get a file from another directory:

sccs -p /usr/src/sccs/s. get cc.c

or:

sccs get /usr/src/sccs/s.cc.c

3. To make a delta of a large number of files in the current directory:

sccs delta *.c

4. To get a list of files being edited that are not on branches:

sccs info -b

5. To delta everything being edited by the current user:

sccs delta $(sccs tell -U)

6. In a makefile, to get source files from an SCCS file if it does not already exist:

SRCS = <list of source files>
$(SRCS):
sccs get $(REL) $@

RATIONALE
SCCS and its associated utilities are part of the XSI Development Utilities option within the XSI extension.

SCCS is an abbreviation for Source Code Control System. It is a maintenance and enhancement tracking tool. When a file is
put under SCCS, the source code control system maintains the file and, when changes are made, identifies and stores them
in the file with the original source code and/or documentation. As other changes are made, they too are identified and
retained in the file.

Retrieval of the original and any set of changes is possible. Any version of the file as it develops can be reconstructed
for inspection or additional modification. History data can be stored with each version, documenting why the changes were
made, who made them, and when they were made.

FUTURE DIRECTIONS
None.

SEE ALSO
admin, delta, get, make, prs, rmdel, sact, unget, val, what

COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for
Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copy-
right (C) 2001-2003 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any
discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group
Standard is the referee document. The original Standard can be obtained online at http://www.open-
group.org/unix/online.html .

IEEE/The Open Group 2003 SCCS(1P)