/* Void Main's man pages */
{ phpMan } else { main(); }
TTY_IOCTL(4) Linux Programmer's Manual TTY_IOCTL(4)
NAME
tty_ioctl - ioctls for terminals and serial lines
SYNOPSIS
#include <termios.h>
int ioctl(int fd, int cmd, ...);
DESCRIPTION
The ioctl() call for terminals and serial ports accepts many possible command arguments. Most require a third argument,
of varying type, here called argp or arg.
Use of ioctl makes for nonportable programs. Use the POSIX interface described in termios(3) whenever possible.
Get and Set Terminal Attributes
TCGETS struct termios *argp
Equivalent to tcgetattr(fd, argp).
Get the current serial port settings.
TCSETS const struct termios *argp
Equivalent to tcsetattr(fd, TCSANOW, argp).
Set the current serial port settings.
TCSETSW const struct termios *argp
Equivalent to tcsetattr(fd, TCSADRAIN, argp).
Allow the output buffer to drain, and set the current serial port settings.
TCSETSF const struct termios *argp
Equivalent to tcsetattr(fd, TCSAFLUSH, argp).
Allow the output buffer to drain, discard pending input, and set the current serial port settings.
The following four ioctls are just like TCGETS, TCSETS, TCSETSW, TCSETSF, except that they take a struct termio * instead
of a struct termios *.
TCGETA struct termio *argp
TCSETA const struct termio *argp
TCSETAW const struct termio *argp
TCSETAF const struct termio *argp
Locking the termios structure
The termios structure of a terminal can be locked. The lock is itself a termios structure, with nonzero bits or fields
indicating a locked value.
TIOCGLCKTRMIOS struct termios *argp
Gets the locking status of the termios structure of the terminal.
TIOCSLCKTRMIOS const struct termios *argp
Sets the locking status of the termios structure of the terminal. Only root (more precisely: a process with the
CAP_SYS_ADMIN capability) can do this.
Get and Set Window Size
Window sizes are kept in the kernel, but not used by the kernel (except in the case of virtual consoles, where the kernel
will update the window size when the size of the virtual console changes, for example, by loading a new font).
The following constants and structure are defined in <sys/ioctl.h>.
TIOCGWINSZ struct winsize *argp
Get window size.
TIOCSWINSZ const struct winsize *argp
Set window size.
The struct used by these ioctls is defined as
struct winsize {
unsigned short ws_row;
unsigned short ws_col;
unsigned short ws_xpixel; /* unused */
unsigned short ws_ypixel; /* unused */
};
When the window size changes, a SIGWINCH signal is sent to the foreground process group.
Sending a Break
TCSBRK int arg
Equivalent to tcsendbreak(fd, arg).
If the terminal is using asynchronous serial data transmission, and arg is zero, then send a break (a stream of
zero bits) for between 0.25 and 0.5 seconds. If the terminal is not using asynchronous serial data transmission,
then either a break is sent, or the function returns without doing anything. When arg is nonzero, nobody knows
what will happen.
(SVr4, UnixWare, Solaris, Linux treat tcsendbreak(fd,arg) with nonzero arg like tcdrain(fd). SunOS treats arg as
a multiplier, and sends a stream of bits arg times as long as done for zero arg. DG/UX and AIX treat arg (when
nonzero) as a time interval measured in milliseconds. HP-UX ignores arg.)
TCSBRKP int arg
So-called "POSIX version" of TCSBRK. It treats nonzero arg as a timeinterval measured in deciseconds, and does
nothing when the driver does not support breaks.
TIOCSBRK void
Turn break on, that is, start sending zero bits.
TIOCCBRK void
Turn break off, that is, stop sending zero bits.
Software flow control
TCXONC int arg
Equivalent to tcflow(fd, arg).
See tcflow(3) for the argument values TCOOFF, TCOON, TCIOFF, TCION.
Buffer count and flushing
FIONREAD int *argp
Get the number of bytes in the input buffer.
TIOCINQ int *argp
Same as FIONREAD.
TIOCOUTQ int *argp
Get the number of bytes in the output buffer.
TCFLSH int arg
Equivalent to tcflush(fd, arg).
See tcflush(3) for the argument values TCIFLUSH, TCOFLUSH, TCIOFLUSH.
Faking input
TIOCSTI const char *argp
Insert the given byte in the input queue.
Redirecting console output
TIOCCONS void
Redirect output that would have gone to /dev/console or /dev/tty0 to the given terminal. If that was a pseudo-
terminal master, send it to the slave. In Linux before version 2.6.10, anybody can do this as long as the output
was not redirected yet; since version 2.6.10, only root (a process with the CAP_SYS_ADMIN capability) may do this.
If output was redirected already EBUSY is returned, but redirection can be stopped by using this ioctl with fd
pointing at /dev/console or /dev/tty0.
Controlling terminal
TIOCSCTTY int arg
Make the given terminal the controlling terminal of the calling process. The calling process must be a session
leader and not have a controlling terminal already. If this terminal is already the controlling terminal of a
different session group then the ioctl fails with EPERM, unless the caller is root (more precisely: has the
CAP_SYS_ADMIN capability) and arg equals 1, in which case the terminal is stolen, and all processes that had it as
controlling terminal lose it.
TIOCNOTTY void
If the given terminal was the controlling terminal of the calling process, give up this controlling terminal. If
the process was session leader, then send SIGHUP and SIGCONT to the foreground process group and all processes in
the current session lose their controlling terminal.
Process group and session ID
TIOCGPGRP pid_t *argp
When successful, equivalent to *argp = tcgetpgrp(fd).
Get the process group ID of the foreground process group on this terminal.
TIOCSPGRP const pid_t *argp
Equivalent to tcsetpgrp(fd, *argp).
Set the foreground process group ID of this terminal.
TIOCGSID pid_t *argp
Get the session ID of the given terminal. This will fail with ENOTTY in case the terminal is not a master pseudo-
terminal and not our controlling terminal. Strange.
Exclusive mode
TIOCEXCL void
Put the terminal into exclusive mode. No further open(2) operations on the terminal are permitted. (They will
fail with EBUSY, except for root, that is, a process with the CAP_SYS_ADMIN capability.)
TIOCNXCL void
Disable exclusive mode.
Line discipline
TIOCGETD int *argp
Get the line discipline of the terminal.
TIOCSETD const int *argp
Set the line discipline of the terminal.
Pseudo-terminal ioctls
TIOCPKT const int *argp
Enable (when *argp is nonzero) or disable packet mode. Can be applied to the master side of a pseudo-terminal
only (and will return ENOTTY otherwise). In packet mode, each subsequent read(2) will return a packet that either
contains a single nonzero control byte, or has a single byte containing zero (' ') followed by data written on the
slave side of the pseudo-terminal. If the first byte is not TIOCPKT_DATA (0), it is an OR of one or more of the
following bits:
TIOCPKT_FLUSHREAD The read queue for the terminal is flushed.
TIOCPKT_FLUSHWRITE The write queue for the terminal is flushed.
TIOCPKT_STOP Output to the terminal is stopped.
TIOCPKT_START Output to the terminal is restarted.
TIOCPKT_DOSTOP The start and stop characters are ^S/^Q.
TIOCPKT_NOSTOP The start and stop characters are not ^S/^Q.
While this mode is in use, the presence of control status information to be read from the master side may be
detected by a select(2) for exceptional conditions.
This mode is used by rlogin(1) and rlogind(8) to implement a remote-echoed, locally ^S/^Q flow-controlled remote
login.
The BSD ioctls TIOCSTOP, TIOCSTART, TIOCUCNTL, TIOCREMOTE have not been implemented under Linux.
Modem control
TIOCMGET int *argp
get the status of modem bits.
TIOCMSET const int *argp
set the status of modem bits.
TIOCMBIC const int *argp
clear the indicated modem bits.
TIOCMBIS const int *argp
set the indicated modem bits.
Bits used by these four ioctls:
TIOCM_LE DSR (data set ready/line enable)
TIOCM_DTR DTR (data terminal ready)
TIOCM_RTS RTS (request to send)
TIOCM_ST Secondary TXD (transmit)
TIOCM_SR Secondary RXD (receive)
TIOCM_CTS CTS (clear to send)
TIOCM_CAR DCD (data carrier detect)
TIOCM_CD see TIOCM_CAR
TIOCM_RNG RNG (ring)
TIOCM_RI see TIOCM_RNG
TIOCM_DSR DSR (data set ready)
Marking a line as local
TIOCGSOFTCAR int *argp
("Get software carrier flag") Get the status of the CLOCAL flag in the c_cflag field of the termios structure.
TIOCSSOFTCAR const int *argp
("Set software carrier flag") Set the CLOCAL flag in the termios structure when *argp is nonzero, and clear it
otherwise.
If the CLOCAL flag for a line is off, the hardware carrier detect (DCD) signal is significant, and an open(2) of the cor-
responding terminal will block until DCD is asserted, unless the O_NONBLOCK flag is given. If CLOCAL is set, the line
behaves as if DCD is always asserted. The software carrier flag is usually turned on for local devices, and is off for
lines with modems.
Linux-specific
For the TIOCLINUX ioctl, see console_ioctl(4).
Kernel debugging
#include <linux/tty.h>
TIOCTTYGSTRUCT struct tty_struct *argp
Get the tty_struct corresponding to fd.
RETURN VALUE
The ioctl() system call returns 0 on success. On error it returns -1 and sets errno appropriately.
ERRORS
EINVAL Invalid command parameter.
ENOIOCTLCMD
Unknown command.
ENOTTY Inappropriate fd.
EPERM Insufficient permission.
EXAMPLE
Check the condition of DTR on the serial port.
#include <termios.h>
#include <fcntl.h>
#include <sys/ioctl.h>
int
main(void)
{
int fd, serial;
fd = open("/dev/ttyS0", O_RDONLY);
ioctl(fd, TIOCMGET, &serial);
if (serial & TIOCM_DTR)
puts("TIOCM_DTR is not set");
else
puts("TIOCM_DTR is set");
close(fd);
}
SEE ALSO
ioctl(2), termios(3), console_ioctl(4), pty(7)
COLOPHON
This page is part of release 3.25 of the Linux man-pages project. A description of the project, and information about
reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.
Linux 2008-10-29 TTY_IOCTL(4)
