phpMan

/* Void Main's man pages */

{ phpMan } else { main(); }

unbound-control(8) unbound 1.4.13 unbound-control(8)

NAME
unbound-control, unbound-control-setup - Unbound remote server control utility.

SYNOPSIS
unbound-control [-h] [-c cfgfile] [-s server] command

DESCRIPTION
Unbound-control performs remote administration on the unbound(8) DNS server. It reads the configuration file, contacts
the unbound server over SSL sends the command and displays the result.

The available options are:

-h Show the version and commandline option help.

-c cfgfile
The config file to read with settings. If not given the default config file /etc/unbound/unbound.conf is used.

-s server[@port]
IPv4 or IPv6 address of the server to contact. If not given, the address is read from the config file.

COMMANDS
There are several commands that the server understands.

start Start the server. Simply execs unbound(8). The unbound executable is searched for in the PATH set in the environ-
ment. It is started with the config file specified using -c or the default config file.

stop Stop the server. The server daemon exits.

reload Reload the server. This flushes the cache and reads the config file fresh.

verbosity number
Change verbosity value for logging. Same values as verbosity keyword in unbound.conf(5). This new setting lasts
until the server is issued a reload (taken from config file again), or the next verbosity control command.

log_reopen
Reopen the logfile, close and open it. Useful for logrotation to make the daemon release the file it is logging
to. If you are using syslog it will attempt to close and open the syslog (which may not work if chrooted).

stats Print statistics. Resets the internal counters to zero, this can be controlled using the statistics-cumulative
config statement. Statistics are printed with one [name]: [value] per line.

stats_noreset
Peek at statistics. Prints them like the stats command does, but does not reset the internal counters to zero.

status Display server status. Exit code 3 if not running (the connection to the port is refused), 1 on error, 0 if run-
ning.

local_zone name type
Add new local zone with name and type. Like local-zone config statement. If the zone already exists, the type is
changed to the given argument.

local_zone_remove name
Remove the local zone with the given name. Removes all local data inside it. If the zone does not exist, the
command succeeds.

local_data RR data...
Add new local data, the given resource record. Like local-data config statement, except for when no covering zone
exists. In that case this remote control command creates a transparent zone with the same name as this record.
This command is not good at returning detailed syntax errors.

local_data_remove name
Remove all RR data from local name. If the name already has no items, nothing happens. Often results in NXDOMAIN
for the name (in a static zone), but if the name has become an empty nonterminal (there is still data in domain
names below the removed name), NOERROR nodata answers are the result for that name.

dump_cache
The contents of the cache is printed in a text format to stdout. You can redirect it to a file to store the cache
in a file.

load_cache
The contents of the cache is loaded from stdin. Uses the same format as dump_cache uses. Loading the cache with
old, or wrong data can result in old or wrong data returned to clients. Loading data into the cache in this way
is supported in order to aid with debugging.

lookup name
Print to stdout the name servers that would be used to look up the name specified.

flush name
Remove the name from the cache. Removes the types A, AAAA, NS, SOA, CNAME, DNAME, MX, PTR, SRV and NAPTR. Because
that is fast to do. Other record types can be removed using flush_type or flush_zone.

flush_type name type
Remove the name, type information from the cache.

flush_zone name
Remove all information at or below the name from the cache. The rrsets and key entries are removed so that new
lookups will be performed. This needs to walk and inspect the entire cache, and is a slow operation.

flush_stats
Reset statistics to zero.

flush_requestlist
Drop the queries that are worked on. Stops working on the queries that the server is working on now. The cache
is unaffected. No reply is sent for those queries, probably making those users request again later. Useful to
make the server restart working on queries with new settings, such as a higher verbosity level.

dump_requestlist
Show what is worked on. Prints all queries that the server is currently working on. Prints the time that users
have been waiting. For internal requests, no time is printed. And then prints out the module status.

flush_infra all|IP
If all then entire infra cache is emptied. If a specific IP address, the entry for that address is removed from
the cache. It contains EDNS, ping and lameness data.

dump_infra
Show the contents of the infra cache.

set_option opt: val
Set the option to the given value without a reload. The cache is therefore not flushed. The option must end with
a ':' and whitespace must be between the option and the value. Some values may not have an effect if set this
way, the new values are not written to the config file, not all options are supported. This is different from the
set_option call in libunbound, where all values work because unbound has not been inited.

The values that work are: statistics-interval, statistics-cumulative, do-not-query-localhost, harden-short-buf-
size, harden-large-queries, harden-glue, harden-dnssec-stripped, harden-below-nxdomain, harden-referral-path,
prefetch, prefetch-key, log-queries, hide-identity, hide-version, identity, version, val-log-level,
val-log-squelch, ignore-cd-flag, add-holddown, del-holddown, keep-missing, tcp-upstream.

get_option opt
Get the value of the option. Give the option name without a trailing ':'. The value is printed. If the value is
"", nothing is printed and the connection closes. On error 'error ...' is printed (it gives a syntax error on
unknown option). For some options a list of values, one on each line, is printed. The options are shown from the
config file as modified with set_option. For some options an override may have been taken that does not show up
with this command, not results from e.g. the verbosity and forward control commands. Not all options work, see
list_stubs, list_forwards, list_local_zones and list_local_data for those.

list_stubs
List the stub zones in use. These are printed one by one to the output. This includes the root hints in use.

list_forwards
List the forward zones in use. These are printed zone by zone to the output.

list_local_zones
List the local zones in use. These are printed one per line with zone type.

list_local_data
List the local data RRs in use. The resource records are printed.

forward [off | addr ... ]
Setup forwarding mode. Configures if the server should ask other upstream nameservers, should go to the internet
root nameservers itself, or show the current config. You could pass the nameservers after a DHCP update.

Without arguments the current list of addresses used to forward all queries to is printed. On startup this is
from the forward-zone "." configuration. Afterwards it shows the status. It prints off when no forwarding is
used.

If off is passed, forwarding is disabled and the root nameservers are used. This can be used to avoid to avoid
buggy or non-DNSSEC supporting nameservers returned from DHCP. But may not work in hotels or hotspots.

If one or more IPv4 or IPv6 addresses are given, those are then used to forward queries to. The addresses must be
separated with spaces. With '@port' the port number can be set explicitly (default port is 53 (DNS)).

By default the forwarder information from the config file for the root "." is used. The config file is not
changed, so after a reload these changes are gone. Other forward zones from the config file are not affected by
this command.

EXIT CODE
The unbound-control program exits with status code 1 on error, 0 on success.

SET UP
The setup requires a self-signed certificate and private keys for both the server and client. The script unbound-con-
trol-setup generates these in the default run directory, or with -d in another directory. If you change the access con-
trol permissions on the key files you can decide who can use unbound-control, by default owner and group but not all
users. Run the script under the same username as you have configured in unbound.conf or as root, so that the daemon is
permitted to read the files, for example with:
sudo -u unbound unbound-control-setup
If you have not configured a username in unbound.conf, the keys need read permission for the user credentials under which
the daemon is started. The script preserves private keys present in the directory. After running the script as root,
turn on control-enable in unbound.conf.

STATISTIC COUNTERS
The stats command shows a number of statistic counters.

threadX.num.queries
number of queries received by thread

threadX.num.cachehits
number of queries that were successfully answered using a cache lookup

threadX.num.cachemiss
number of queries that needed recursive processing

threadX.num.prefetch
number of cache prefetches performed. This number is included in cachehits, as the original query had the
unprefetched answer from cache, and resulted in recursive processing, taking a slot in the requestlist. Not part
of the recursivereplies (or the histogram thereof) or cachemiss, as a cache response was sent.

threadX.num.recursivereplies
The number of replies sent to queries that needed recursive processing. Could be smaller than threadX.num.cache-
miss if due to timeouts no replies were sent for some queries.

threadX.requestlist.avg
The average number of requests in the internal recursive processing request list on insert of a new incoming
recursive processing query.

threadX.requestlist.max
Maximum size attained by the internal recursive processing request list.

threadX.requestlist.overwritten
Number of requests in the request list that were overwritten by newer entries. This happens if there is a flood of
queries that recursive processing and the server has a hard time.

threadX.requestlist.exceeded
Queries that were dropped because the request list was full. This happens if a flood of queries need recursive
processing, and the server can not keep up.

threadX.requestlist.current.all
Current size of the request list, includes internally generated queries (such as priming queries and glue
lookups).

threadX.requestlist.current.user
Current size of the request list, only the requests from client queries.

threadX.recursion.time.avg
Average time it took to answer queries that needed recursive processing. Note that queries that were answered from
the cache are not in this average.

threadX.recursion.time.median
The median of the time it took to answer queries that needed recursive processing. The median means that 50% of
the user queries were answered in less than this time. Because of big outliers (usually queries to non responsive
servers), the average can be bigger than the median. This median has been calculated by interpolation from a his-
togram.

total.num.queries
summed over threads.

total.num.cachehits
summed over threads.

total.num.cachemiss
summed over threads.

total.num.prefetch
summed over threads.

total.num.recursivereplies
summed over threads.

total.requestlist.avg
averaged over threads.

total.requestlist.max
the maximum of the thread requestlist.max values.

total.requestlist.overwritten
summed over threads.

total.requestlist.exceeded
summed over threads.

total.requestlist.current.all
summed over threads.

total.recursion.time.median
averaged over threads.

time.now
current time in seconds since 1970.

time.up
uptime since server boot in seconds.

time.elapsed
time since last statistics printout, in seconds.

EXTENDED STATISTICS
mem.total.sbrk
If sbrk(2) is available, an estimate of the heap size of the program in number of bytes. Close to the total memory
used by the program, as reported by top and ps. Could be wrong if the OS allocates memory non-contiguously.

mem.cache.rrset
Memory in bytes in use by the RRset cache.

mem.cache.message
Memory in bytes in use by the message cache.

mem.mod.iterator
Memory in bytes in use by the iterator module.

mem.mod.validator
Memory in bytes in use by the validator module. Includes the key cache and negative cache.

histogram.<sec>.<usec>.to.<sec>.<usec>
Shows a histogram, summed over all threads. Every element counts the recursive queries whose reply time fit
between the lower and upper bound. Times larger or equal to the lowerbound, and smaller than the upper bound.
There are 40 buckets, with bucket sizes doubling.

num.query.type.A
The total number of queries over all threads with query type A. Printed for the other query types as well, but
only for the types for which queries were received, thus =0 entries are omitted for brevity.

num.query.type.other
Number of queries with query types 256-65535.

num.query.class.IN
The total number of queries over all threads with query class IN (internet). Also printed for other classes (such
as CH (CHAOS) sometimes used for debugging), or NONE, ANY, used by dynamic update. num.query.class.other is
printed for classes 256-65535.

num.query.opcode.QUERY
The total number of queries over all threads with query opcode QUERY. Also printed for other opcodes, UPDATE, ...

num.query.tcp
Number of queries that were made using TCP towards the unbound server.

num.query.ipv6
Number of queries that were made using IPv6 towards the unbound server.

num.query.flags.RD
The number of queries that had the RD flag set in the header. Also printed for flags QR, AA, TC, RA, Z, AD, CD.
Note that queries with flags QR, AA or TC may have been rejected because of that.

num.query.edns.present
number of queries that had an EDNS OPT record present.

num.query.edns.DO
number of queries that had an EDNS OPT record with the DO (DNSSEC OK) bit set. These queries are also included in
the num.query.edns.present number.

num.answer.rcode.NXDOMAIN
The number of answers to queries, from cache or from recursion, that had the return code NXDOMAIN. Also printed
for the other return codes.

num.answer.rcode.nodata
The number of answers to queries that had the pseudo return code nodata. This means the actual return code was
NOERROR, but additionally, no data was carried in the answer (making what is called a NOERROR/NODATA answer).
These queries are also included in the num.answer.rcode.NOERROR number. Common for AAAA lookups when an A record
exists, and no AAAA.

num.answer.secure
Number of answers that were secure. The answer validated correctly. The AD bit might have been set in some of
these answers, where the client signalled (with DO or AD bit in the query) that they were ready to accept the AD
bit in the answer.

num.answer.bogus
Number of answers that were bogus. These answers resulted in SERVFAIL to the client because the answer failed
validation.

num.rrset.bogus
The number of rrsets marked bogus by the validator. Increased for every RRset inspection that fails.

unwanted.queries
Number of queries that were refused or dropped because they failed the access control settings.

unwanted.replies
Replies that were unwanted or unsolicited. Could have been random traffic, delayed duplicates, very late answers,
or could be spoofing attempts. Some low level of late answers and delayed duplicates are to be expected with the
UDP protocol. Very high values could indicate a threat (spoofing).

FILES
/etc/unbound/unbound.conf
unbound configuration file.

/etc/unbound
directory with private keys (unbound_server.key and unbound_control.key) and self-signed certificates
(unbound_server.pem and unbound_control.pem).