/* Void Main's man pages */
{ phpMan } else { main(); }
WPA_SUPPLICANT(8) WPA_SUPPLICANT(8)
NAME
wpa_supplicant - Wi-Fi Protected Access client and IEEE 802.1X supplicant
SYNOPSIS
wpa_supplicant [ -BddfhKLqqtuvW ] [ -iifname ] [ -cconfig file ] [ -Ddriver ] [ -PPID_file ] [ -foutput file ]
OVERVIEW
Wireless networks do not require physical access to the network equipment in the same way as wired networks. This makes
it easier for unauthorized users to passively monitor a network and capture all transmitted frames. In addition, unau-
thorized use of the network is much easier. In many cases, this can happen even without user's explicit knowledge since
the wireless LAN adapter may have been configured to automatically join any available network.
Link-layer encryption can be used to provide a layer of security for wireless networks. The original wireless LAN stan-
dard, IEEE 802.11, included a simple encryption mechanism, WEP. However, that proved to be flawed in many areas and net-
work protected with WEP cannot be consider secure. IEEE 802.1X authentication and frequently changed dynamic WEP keys can
be used to improve the network security, but even that has inherited security issues due to the use of WEP for encryp-
tion. Wi-Fi Protected Access and IEEE 802.11i amendment to the wireless LAN standard introduce a much improvement mecha-
nism for securing wireless networks. IEEE 802.11i enabled networks that are using CCMP (encryption mechanism based on
strong cryptographic algorithm AES) can finally be called secure used for applications which require efficient protection
against unauthorized access.
wpa_supplicant is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. It
implements WPA key negotiation with a WPA Authenticator and EAP authentication with Authentication Server. In addition,
it controls the roaming and IEEE 802.11 authentication/association of the wireless LAN driver.
wpa_supplicant is designed to be a "daemon" program that runs in the background and acts as the backend component con-
trolling the wireless connection. wpa_supplicant supports separate frontend programs and an example text-based frontend,
wpa_cli, is included with wpa_supplicant.
Before wpa_supplicant can do its work, the network interface must be available. That means that the physical device must
be present and enabled, and the driver for the device must be loaded. The daemon will exit immediately if the device is
not already available.
After wpa_supplicant has configured the network device, higher level configuration such as DHCP may proceed. There are a
variety of ways to integrate wpa_supplicant into a machine's networking scripts, a few of which are described in sections
below.
The following steps are used when associating with an AP using WPA:
o wpa_supplicant requests the kernel driver to scan neighboring BSSes
o wpa_supplicant selects a BSS based on its configuration
o wpa_supplicant requests the kernel driver to associate with the chosen BSS
o If WPA-EAP: integrated IEEE 802.1X Supplicant completes EAP authentication with the authentication server (proxied by
the Authenticator in the AP)
o If WPA-EAP: master key is received from the IEEE 802.1X Supplicant
o If WPA-PSK: wpa_supplicant uses PSK as the master session key
o wpa_supplicant completes WPA 4-Way Handshake and Group Key Handshake with the Authenticator (AP)
o wpa_supplicant configures encryption keys for unicast and broadcast
o normal data packets can be transmitted and received
SUPPORTED FEATURES
Supported WPA/IEEE 802.11i features:
o WPA-PSK ("WPA-Personal")
o WPA with EAP (e.g., with RADIUS authentication server) ("WPA-Enterprise") Following authentication methods are sup-
ported with an integrate IEEE 802.1X Supplicant:
o EAP-TLS
o EAP-PEAP/MSCHAPv2 (both PEAPv0 and PEAPv1)
o EAP-PEAP/TLS (both PEAPv0 and PEAPv1)
o EAP-PEAP/GTC (both PEAPv0 and PEAPv1)
o EAP-PEAP/OTP (both PEAPv0 and PEAPv1)
o EAP-PEAP/MD5-Challenge (both PEAPv0 and PEAPv1)
o EAP-TTLS/EAP-MD5-Challenge
o EAP-TTLS/EAP-GTC
o EAP-TTLS/EAP-OTP
o EAP-TTLS/EAP-MSCHAPv2
o EAP-TTLS/EAP-TLS
o EAP-TTLS/MSCHAPv2
o EAP-TTLS/MSCHAP
o EAP-TTLS/PAP
o EAP-TTLS/CHAP
o EAP-SIM
o EAP-AKA
o EAP-PSK
o EAP-PAX
o LEAP (note: requires special support from the driver for IEEE 802.11 authentication)
o (following methods are supported, but since they do not generate keying material, they cannot be used with WPA or
IEEE 802.1X WEP keying)
o EAP-MD5-Challenge
o EAP-MSCHAPv2
o EAP-GTC
o EAP-OTP
o key management for CCMP, TKIP, WEP104, WEP40
o RSN/WPA2 (IEEE 802.11i)
o pre-authentication
o PMKSA caching
AVAILABLE DRIVERS
A summary of available driver backends is below. Support for each of the driver backends is chosen at wpa_supplicant com-
pile time. For a list of supported driver backends that may be used with the -D option on your system, refer to the help
output of wpa_supplicant (wpa_supplicant -h).
hostap (default) Host AP driver (Intersil Prism2/2.5/3). (this can also be used with Linuxant DriverLoader).
hermes Agere Systems Inc. driver (Hermes-I/Hermes-II).
madwifi
MADWIFI 802.11 support (Atheros, etc.).
atmel ATMEL AT76C5XXx (USB, PCMCIA).
wext Linux wireless extensions (generic).
ndiswrapper
Linux ndiswrapper.
broadcom
Broadcom wl.o driver.
ipw Intel ipw2100/2200 driver.
wired wpa_supplicant wired Ethernet driver
roboswitch
wpa_supplicant Broadcom switch driver
bsd BSD 802.11 support (Atheros, etc.).
ndis Windows NDIS driver.
COMMAND LINE OPTIONS
Most command line options have global scope. Some are given per interface, and are only valid if at least one -i option
is specified, otherwise they're ignored. Option groups for different interfaces must be separated by -N option.
-b br_ifname
Optional bridge interface name. (Per interface)
-B Run daemon in the background.
-c filename
Path to configuration file. (Per interface)
-C ctrl_interface
Path to ctrl_interface socket (Per interface. Only used if -c is not).
-i ifname
Interface to listen on. Multiple instances of this option can be present, one per interface, separated by -N
option (see below).
-d Increase debugging verbosity (-dd even more).
-D driver
Driver to use. (Per interface, see the available options below.)
-f output file
Log output to specified file instead of stdout.
-g global ctrl_interface
Path to global ctrl_interface socket. If specified, interface definitions may be omitted.
-K Include keys (passwords, etc.) in debug output.
-t Include timestamp in debug messages.
-h Help. Show a usage message.
-L Show license (GPL and BSD).
-p Driver parameters. (Per interface)
-P PID_file
Path to PID file.
-q Decrease debugging verbosity (-qq even less).
-u Enabled DBus control interface. If enabled, interface definitions may be omitted.
-v Show version.
-W Wait for a control interface monitor before starting.
-N Start describing new interface.
EXAMPLES
In most common cases, wpa_supplicant is started with:
wpa_supplicant -B -c/etc/wpa_supplicant.conf -iwlan0
This makes the process fork into background.
The easiest way to debug problems, and to get debug log for bug reports, is to start wpa_supplicant on foreground with
debugging enabled:
wpa_supplicant -c/etc/wpa_supplicant.conf -iwlan0 -d
wpa_supplicant can control multiple interfaces (radios) either by running one process for each interface separately or by
running just one process and list of options at command line. Each interface is separated with -N argument. As an exam-
ple, following command would start wpa_supplicant for two interfaces:
wpa_supplicant \
-c wpa1.conf -i wlan0 -D hostap -N \
-c wpa2.conf -i ath0 -D madwifi
OS REQUIREMENTS
Current hardware/software requirements:
o Linux kernel 2.4.x or 2.6.x with Linux Wireless Extensions v15 or newer
o FreeBSD 6-CURRENT
o Microsoft Windows with WinPcap (at least WinXP, may work with other versions)
SUPPORTED DRIVERS
Host AP driver for Prism2/2.5/3 (development snapshot/v0.2.x)
(http://hostap.epitest.fi/) Driver needs to be set in Managed mode (iwconfig wlan0 mode managed). Please note
that station firmware version needs to be 1.7.0 or newer to work in WPA mode.
Linuxant DriverLoader
(http://www.linuxant.com/driverloader/) with Windows NDIS driver for your wlan card supporting WPA.
Agere Systems Inc. Linux Driver
(http://www.agere.com/support/drivers/) Please note that the driver interface file (driver_hermes.c) and hardware
specific include files are not included in the wpa_supplicant distribution. You will need to copy these from the
source package of the Agere driver.
madwifi driver for cards based on Atheros chip set (ar521x)
(http://sourceforge.net/projects/madwifi/) Please note that you will need to modify the wpa_supplicant .config
file to use the correct path for the madwifi driver root directory (CFLAGS += -I../madwifi/wpa line in example
defconfig).
ATMEL AT76C5XXx driver for USB and PCMCIA cards
(http://atmelwlandriver.sourceforge.net/).
Linux ndiswrapper
(http://ndiswrapper.sourceforge.net/) with Windows NDIS driver.
Broadcom wl.o driver
This is a generic Linux driver for Broadcom IEEE 802.11a/g cards. However, it is proprietary driver that is not
publicly available except for couple of exceptions, mainly Broadcom-based APs/wireless routers that use Linux. The
driver binary can be downloaded, e.g., from Linksys support site (http://www.linksys.com/support/gpl.asp) for
Linksys WRT54G. The GPL tarball includes cross-compiler and the needed header file, wlioctl.h, for compiling
wpa_supplicant. This driver support in wpa_supplicant is expected to work also with other devices based on Broad-
com driver (assuming the driver includes client mode support).
Intel ipw2100 driver
(http://sourceforge.net/projects/ipw2100/)
Intel ipw2200 driver
(http://sourceforge.net/projects/ipw2200/)
Linux wireless extensions
In theory, any driver that supports Linux wireless extensions can be used with IEEE 802.1X (i.e., not WPA) when
using ap_scan=0 option in configuration file.
Wired Ethernet drivers
Use ap_scan=0.
BSD net80211 layer (e.g., Atheros driver)
At the moment, this is for FreeBSD 6-CURRENT branch.
Windows NDIS
The current Windows port requires WinPcap (http://winpcap.polito.it/). See README-Windows.txt for more informa-
tion.
wpa_supplicant was designed to be portable for different drivers and operating systems. Hopefully, support for more wlan
cards and OSes will be added in the future. See developer.txt for more information about the design of wpa_supplicant and
porting to other drivers. One main goal is to add full WPA/WPA2 support to Linux wireless extensions to allow new drivers
to be supported without having to implement new driver-specific interface code in wpa_supplicant.
ARCHITECTURE
The wpa_supplicant system consists of the following components:
wpa_supplicant.conf
the configuration file describing all networks that the user wants the computer to connect to.
wpa_supplicant
the program that directly interacts with the network interface.
wpa_cli
the client program that provides a high-level interface to the functionality of the daemon.
wpa_passphrase
a utility needed to construct wpa_supplicant.conf files that include encrypted passwords.
QUICK START
First, make a configuration file, e.g. /etc/wpa_supplicant.conf, that describes the networks you are interested in. See
wpa_supplicant.conf(5) for details.
Once the configuration is ready, you can test whether the configuration works by running wpa_supplicant with following
command to start it on foreground with debugging enabled:
wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d
Assuming everything goes fine, you can start using following command to start wpa_supplicant on background without debug-
ging:
wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B
Please note that if you included more than one driver interface in the build time configuration (.config), you may need
to specify which interface to use by including -D<driver name> option on the command line.
INTERFACE TO PCMCIA-CS/CARDMRG
For example, following small changes to pcmcia-cs scripts can be used to enable WPA support:
Add MODE="Managed" and WPA="y" to the network scheme in /etc/pcmcia/wireless.opts.
Add the following block to the end of start action handler in /etc/pcmcia/wireless:
if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
/usr/local/bin/wpa_supplicant -B -c/etc/wpa_supplicant.conf -i$DEVICE
fi
Add the following block to the end of stop action handler (may need to be separated from other actions) in /etc/pcm-
cia/wireless:
if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
killall wpa_supplicant
fi
This will make cardmgr start wpa_supplicant when the card is plugged in.
SEE ALSO
wpa_background(8) wpa_supplicant.conf(5) wpa_cli(8) wpa_passphrase(8)
LEGAL
wpa_supplicant is copyright (c) 2003-2007, Jouni Malinen <jATw1.fi> and contributors. All Rights Reserved.
This program is dual-licensed under both the GPL version 2 and BSD license. Either license may be used at your option.
15 February 2009 WPA_SUPPLICANT(8)
