xsetwacom(1)                                                                                                        xsetwacom(1)



NAME
       xsetwacom - commandline utility to query and modify __drivername__ driver settings.

SYNOPSIS
       xsetwacom [options] command [device_name] [parameter] [value]


DESCRIPTION
       This  program queries or changes properties on the devices loaded by the __drivername__ driver. The modification of prop-
       erties happens at runtime and is not persistent through X server restarts.

GENERAL OPTIONS
       -d, --display display_name
              Connect to the X server specified in display_name; see X(7).

       -h, --help
              Prints a short help.

       -v, --verbose
              Enable verbose output, useful for debugging.

       -V, --version
              Display version number and exit.


COMMANDS
       Allowed commands are list, get, and set.  The command may be specified with our without one or two preceding dashes, i.e.
       --list is equivalent to -list and list.


   LIST COMMANDS
       list dev
              List known devices. Only input devices managed by the __drivername__ driver are listed.

       list param
              List  known  parameters. List all parameters suitable for the get or the set command. Note that not all parameters
              are available on all device types.

       list mods
              List the available list of modifiers to be used when setting key or button actions.


   GET COMMANDS
       get device_name parameter
              Get the current settings for the parameter on the given device. Note that not all parameters are available on  all
              device types. The special parameter name "all" may be provided to display all current settings on the device.

       By default, options are printed on the commandline in the respective format. The output format may be altered with one of
       the following options:

       -s, --shell
              Display the output in shell format, i.e. as shell commands to xsetwacom to reproduce the same parameter.

       -x, --xconf
              Display the output in xorg.conf format, i.e. as option lines that may be added to the InputDevice section  in  the
              xorg.conf.


   SET COMMANDS
       set device_name parameter value
              Set the parameter value on the given device to the value provided. Note that not all parameters are writable, some
              are read-only and result in an error when trying to be modified.


AUTHORS
       Peter Hutterer <peter.huttererATredhat.com>


SEE ALSO
       Xorg(1), wacom(4), xorg.conf(5), X(7)



X Version 11                                         xf86-input-wacom 0.10.8                                        xsetwacom(1)