Boot Error in FC5

fufromsx · Post by **fufromsx** » Fri Mar 31, 2006 1:27 pm

It actually boot's through but it gets stuck in here for a while. Total boot time is about 6 minutes.

pnp: PnPACPI: METHOD_NAME_ _CRS failure for PNP 0400

i'm new at this as you can tell so i don't know if this is a big deal or not. Thanks.

Void Main · Post by **Void Main** » Fri Mar 31, 2006 2:07 pm

Can you try to add "pnpacpi=off" to the kernel boot line? To do this reboot your computer and when the very first blue boot screen pops up immediately press the "a" key. It should take you to the end of the kernel boot line (line should start with the word "kernel"). At the end of that line type in a space and then "pnpacpi=off" without the quotes and then press ENTER. If it boots ok without problems you'll want to edit your /etc/grub.conf file and add the parameter to the boot line so it is permanent.

fufromsx · Post by **fufromsx** » Fri Mar 31, 2006 6:17 pm

Ok. i'll try that when get the chance.

Thanks void,
fufromsx (a.k.a. fired_up)