Keyboard flops after GTK packages installed

Discuss Applications
JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Keyboard flops after GTK packages installed

Post by JoeDude »

Don't know where else to put this and it was the instalation of some apps that probably started this problem, so here we go. (Actually I claim responsability for causing it :D stoopid noob)

I'm running SuSE 9.0 and been trying to get MPlayer installed. It kept telling me I could do the GUI because I didn't have the right GTK developement packages, but wouldn't tell me which one I needed. SOOOOOOOO...being the Noob I am, I did a search for everything that was named, required, used or referenced GTK. After many hours of turmoil...TADA I got MPlayer with GUI!!!

NOW, my keyboard is acting up.

Defined. In word processors it works fine. On web browsers (WebBrowser, Epiphany, Mozilla, Konqueror) it won't let me type in anything other than in the address bar. In Konsoles, It will only allow me to type when I first bring it up. If I switch to another application, then come back to it, No typing. This behavior is true with all other functions. The mouse is working fine.

More specifoically on the keyboard, functions work. I can use enter, backspace, tab, CTRL + C or V etc. I just can't seem to type letter or numbers.

Any ideas?

worker201
guru
guru
Posts: 668
Joined: Sun Jun 13, 2004 6:38 pm
Location: Hawaii

Post by worker201 »

According to this page from mplayer documentation:
http://www.mplayerhq.hu/DOCS/HTML/en/gui.html
the only libraries you need are libpng, gtk-dev, and libpng-dev.

Maybe if you gave us a list of what other random gtk libraries you installed? There may be some strange incompatibilities, or some extraneous stuff that you don't want or need.

Alternatively, if you are excited about trying this out for yourself, attempt to remove all the gtk items you installed, and then reinstall only the ones you need. See if that offers you any improvement. I seem to recall that you prefer KDE, is that correct? If so, there may be some serious conflicts between gtk and Qt. Might want to to check into that.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

I have since switched to GNOME, it seems to be more supported and I get a whole lot more references for it.

I switched cuz you said so :D

When I get home and get time I'll post the absurd list of GTK's that were installed.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

OK...I don't know if this will help, but here goes. It's the system event log for what I think were the offending days.

Jul 20 00:00:00 linux /USR/SBIN/CRON[15173]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 20 00:28:30 linux -- MARK --
Jul 20 00:48:30 linux -- MARK --
Jul 20 00:59:00 linux /USR/SBIN/CRON[17301]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 01:00:00 linux /USR/SBIN/CRON[17317]: (root) CMD (/sbin/evlogmgr -c "severity=DEBUG")
Jul 20 01:28:30 linux -- MARK --
Jul 20 01:48:30 linux -- MARK --
Jul 20 01:59:00 linux /USR/SBIN/CRON[19029]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 02:00:00 linux /USR/SBIN/CRON[19071]: (root) CMD (/sbin/evlogmgr -c 'age > "30d"')
Jul 20 02:28:30 linux -- MARK --
Jul 20 02:48:30 linux -- MARK --
Jul 20 02:59:00 linux /USR/SBIN/CRON[21429]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 02:59:00 linux /USR/SBIN/CRON[21431]: (root) CMD (online_update )
Jul 20 03:28:30 linux -- MARK --
Jul 20 03:48:30 linux -- MARK --
Jul 20 03:59:00 linux /USR/SBIN/CRON[24093]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 04:14:00 linux /USR/SBIN/CRON[24684]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.daily)
Jul 20 04:18:00 linux su: (to nobody) root on none
Jul 20 04:18:00 linux su: pam_unix2: session started for user nobody, service su
Jul 20 04:20:41 linux su: pam_unix2: session finished for user nobody, service su
Jul 20 04:48:30 linux -- MARK --
Jul 20 04:59:00 linux /USR/SBIN/CRON[26107]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 05:28:30 linux -- MARK --
Jul 20 05:48:30 linux -- MARK --
Jul 20 05:59:00 linux /USR/SBIN/CRON[26874]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 06:00:00 linux /USR/SBIN/CRON[26900]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 20 06:28:30 linux -- MARK --
Jul 20 06:48:30 linux -- MARK --
Jul 20 06:59:00 linux /USR/SBIN/CRON[27409]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 07:28:30 linux -- MARK --
Jul 20 07:48:30 linux -- MARK --
Jul 20 07:59:00 linux /USR/SBIN/CRON[27812]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 08:28:30 linux -- MARK --
Jul 20 08:48:30 linux -- MARK --
Jul 20 08:59:00 linux /USR/SBIN/CRON[28484]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 09:28:30 linux -- MARK --
Jul 20 09:48:30 linux -- MARK --
Jul 20 09:59:00 linux /USR/SBIN/CRON[29852]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 10:28:30 linux -- MARK --
Jul 20 10:48:30 linux -- MARK --
Jul 20 10:59:00 linux /USR/SBIN/CRON[31391]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 11:28:30 linux -- MARK --
Jul 20 11:48:30 linux -- MARK --
Jul 20 11:59:00 linux /USR/SBIN/CRON[328]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 12:00:00 linux /USR/SBIN/CRON[376]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 20 12:28:30 linux -- MARK --
Jul 20 12:48:30 linux -- MARK --
Jul 20 12:59:00 linux /USR/SBIN/CRON[2022]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 13:28:30 linux -- MARK --
Jul 20 13:48:30 linux -- MARK --
Jul 20 13:59:00 linux /USR/SBIN/CRON[3741]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 14:28:30 linux -- MARK --
Jul 20 14:48:30 linux -- MARK --
Jul 20 14:59:00 linux /USR/SBIN/CRON[5347]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 15:28:30 linux -- MARK --
Jul 20 15:48:30 linux -- MARK --
Jul 20 15:59:00 linux /USR/SBIN/CRON[7112]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 16:03:11 linux su: (to root) joey on /dev/pts/0
Jul 20 16:03:11 linux su: pam_unix2: session started for user root, service su
Jul 20 16:06:20 linux su: pam_unix2: session finished for user root, service su
Jul 20 16:09:35 linux kdm[23545]: pam_unix2: session finished for user joey, service xdm
Jul 20 16:09:35 linux resmgr[1240]: accepted connection from user root
Jul 20 16:09:35 linux resmgr[1240]: disconnect from root
Jul 20 16:09:35 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 13 frees, 12 allocs
Jul 20 16:09:35 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 14 frees, 12 allocs
Jul 20 16:09:35 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Attempt to free NULL pointer
Jul 20 16:09:35 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 15 frees, 12 allocs
Jul 20 16:09:37 linux kernel: agpgart: Device is in legacy mode, falling back to 2.x
Jul 20 16:09:37 linux kernel: agpgart: Putting AGP V2 device at 00:00.0 into 1x mode
Jul 20 16:09:37 linux kernel: agpgart: Putting AGP V2 device at 01:00.0 into 1x mode
Jul 20 16:09:47 linux kdm[7469]: fatal IO error 32 (Broken pipe)
Jul 20 16:09:47 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 17 frees, 16 allocs
Jul 20 16:09:47 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 18 frees, 16 allocs
Jul 20 16:09:47 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 19 frees, 16 allocs
Jul 20 16:09:47 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Attempt to free NULL pointer
Jul 20 16:09:47 linux kernel: [drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 20 frees, 16 allocs
Jul 20 16:09:47 linux init: Switching to runlevel: 6
Jul 20 16:09:49 linux kernel: bootsplash: status on console 0 changed to on
Jul 20 16:09:49 linux kernel: bootsplash: silent jpeg found.
Jul 20 16:09:50 linux smpppd[1729]: terminating on signal 15
Jul 20 16:09:51 linux sshd[1412]: Received signal 15; terminating.
Jul 20 16:09:54 linux kernel: usbserial.c: USB Serial deregistering driver Generic
Jul 20 16:09:54 linux kernel: usb.c: deregistering driver serial
Jul 20 16:09:54 linux kernel: Kernel logging (proc) stopped.
Jul 20 16:09:54 linux kernel: Kernel log daemon terminating.
Jul 20 16:09:55 linux exiting on signal 15
Jul 20 16:11:55 linux syslogd 1.4.1: restart.
Jul 20 16:11:55 linux pppd[1079]: Plugin pppoe.so loaded.
Jul 20 16:11:55 linux pppd[1079]: PPPoE Plugin Initialized
Jul 20 16:11:55 linux pppd[1079]: Plugin passwordfd.so loaded.
Jul 20 16:11:55 linux pppd[1079]: pppd 2.4.1 started by root, uid 0
Jul 20 16:11:55 linux pppd[1079]: Sending PADI
Jul 20 16:11:57 linux /etc/hotplug/usb.rc[1163]: loaded HCD: usb-uhci
Jul 20 16:11:59 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jul 20 16:11:59 linux kernel: Inspecting /boot/System.map-2.4.21-231-athlon
Jul 20 16:12:00 linux kernel: Loaded 21352 symbols from /boot/System.map-2.4.21-231-athlon.
Jul 20 16:12:00 linux kernel: Symbols match kernel version 2.4.21.
Jul 20 16:12:00 linux kernel: Loaded 395 symbols from 18 modules.
Jul 20 16:12:00 linux kernel: bootsplash: silent jpeg found.
Jul 20 16:12:00 linux kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Jul 20 16:12:00 linux kernel: See Documentation/networking/vortex.txt
Jul 20 16:12:00 linux kernel: 00:0d.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xd400. Vers LK1.1.16
Jul 20 16:12:00 linux kernel: 00:01:02:59:72:f1, IRQ 9
Jul 20 16:12:00 linux kernel: product code 4257 rev 00.4 date 05-27-00
Jul 20 16:12:00 linux kernel: Internal config register is 1800000, transceivers 0x8.
Jul 20 16:12:00 linux kernel: 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
Jul 20 16:12:00 linux kernel: MII transceiver found at address 24, status 182d.
Jul 20 16:12:00 linux kernel: Enabling bus-master transmits and whole-frame receives.
Jul 20 16:12:00 linux kernel: 00:0d.0: scatter/gather enabled. h/w checksums enabled
Jul 20 16:12:00 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jul 20 16:12:00 linux kernel: PPP generic driver version 2.4.2
Jul 20 16:12:00 linux kernel: raw1394: /dev/raw1394 device initialized
Jul 20 16:12:00 linux kernel: usb.c: registered new driver usbdevfs
Jul 20 16:12:00 linux kernel: usb.c: registered new driver hub
Jul 20 16:12:00 linux kernel: usb-uhci.c: $Revision: 1.275 $ time 16:07:10 Jun 28 2004
Jul 20 16:12:00 linux kernel: usb-uhci.c: High bandwidth mode enabled
Jul 20 16:12:00 linux kernel: usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
Jul 20 16:12:00 linux kernel: usb-uhci.c: Detected 2 ports
Jul 20 16:12:00 linux kernel: usb.c: new USB bus registered, assigned bus number 1
Jul 20 16:12:00 linux kernel: hub.c: USB hub found
Jul 20 16:12:00 linux kernel: hub.c: 2 ports detected
Jul 20 16:12:00 linux kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
Jul 20 16:12:00 linux kernel: usb-uhci.c: Detected 2 ports
Jul 20 16:12:00 linux kernel: usb.c: new USB bus registered, assigned bus number 2
Jul 20 16:12:00 linux kernel: hub.c: USB hub found
Jul 20 16:12:00 linux kernel: hub.c: 2 ports detected
Jul 20 16:12:00 linux kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jul 20 16:12:00 linux kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Jul 20 16:12:00 linux kernel: mice: PS/2 mouse device common for all mice
Jul 20 16:12:04 linux kernel: ACPI: Power Button (FF) [PWRF]
Jul 20 16:12:04 linux kernel: ACPI: Sleep Button (CM) [SLPB]
Jul 20 16:12:04 linux kernel: ACPI: Processor [CPU1] (supports C1, 16 throttling states)
Jul 20 16:12:04 linux kernel: IPsec Security Association Database (SADB): initialized.
Jul 20 16:12:04 linux kernel: IPsec Security Policy Database (SPD): initialized.
Jul 20 16:12:04 linux kernel: IPsec PF_KEY V2: initialized
Jul 20 16:12:04 linux kernel: IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
Jul 20 16:12:04 linux kernel: IPv6 over IPv4 tunneling driver
Jul 20 16:12:05 linux sshd[1464]: Server listening on :: port 22.
Jul 20 16:12:06 linux kernel: isapnp: Scanning for PnP cards...
Jul 20 16:12:06 linux kernel: isapnp: No Plug & Play device found
Jul 20 16:12:07 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Jul 20 16:12:07 linux kernel: parport_pc: Via 686A parallel port: io=0x378
Jul 20 16:12:07 linux kernel: lp0: using parport0 (polling).
Jul 20 16:12:08 linux kernel: usb.c: registered new driver serial
Jul 20 16:12:08 linux kernel: usbserial.c: USB Serial support registered for Generic
Jul 20 16:12:08 linux kernel: usbserial.c: USB Serial Driver core v1.4
Jul 20 16:12:09 linux kernel: bootsplash: silent jpeg found.
Jul 20 16:12:10 linux smpppd[1760]: smpppd version 1.06 started
Jul 20 16:12:13 linux kernel: isapnp: Scanning for PnP cards...
Jul 20 16:12:13 linux kernel: isapnp: No Plug & Play device found
Jul 20 16:12:13 linux /etc/hotplug/net.agent[1475]: No HW description found ... exiting
Jul 20 16:12:15 linux kernel: eth0: no IPv6 routers present
Jul 20 16:12:16 linux /usr/sbin/cron[1961]: (CRON) STARTUP (fork ok)
Jul 20 16:12:20 linux modprobe: modprobe: Can't locate module char-major-226
Jul 20 16:12:20 linux last message repeated 3 times
Jul 20 16:12:21 linux kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Jul 20 16:12:21 linux kernel: agpgart: Maximum main memory to use for agp memory: 941M
Jul 20 16:12:21 linux kernel: agpgart: Detected Via Twister-K/KT133x/KM133 chipset
Jul 20 16:12:21 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Jul 20 16:12:21 linux kernel: [drm] AGP 0.99 aperture @ 0xe0000000 64MB
Jul 20 16:12:21 linux kernel: [drm] Initialized radeon 1.7.0 20020828 on minor 0
Jul 20 16:12:21 linux kernel: agpgart: Device is in legacy mode, falling back to 2.x
Jul 20 16:12:21 linux kernel: agpgart: Putting AGP V2 device at 00:00.0 into 1x mode
Jul 20 16:12:21 linux kernel: agpgart: Putting AGP V2 device at 01:00.0 into 1x mode
Jul 20 16:12:21 linux kernel: Linux video capture interface: v1.00
Jul 20 16:13:02 linux kdm[2028]: pam_unix2: session started for user joey, service xdm
Jul 20 16:13:02 linux resmgr[1290]: accepted connection from user root
Jul 20 16:13:02 linux resmgr[1290]: disconnect from root
Jul 20 16:13:03 linux gconfd (joey-2109): starting (version 2.2.1), pid 2109 user 'joey'
Jul 20 16:13:03 linux gconfd (joey-2109): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
Jul 20 16:13:03 linux gconfd (joey-2109): Resolved address "xml:readonly:/etc/opt/gnome/gconf/preconf/gconf.xml.defaults" to a read-only config source at position 1
Jul 20 16:13:03 linux gconfd (joey-2109): Resolved address "xml:readwrite:/home/joey/.gconf" to a writable config source at position 2
Jul 20 16:13:03 linux gconfd (joey-2109): Exiting
Jul 20 16:13:04 linux gconfd (joey-2113): starting (version 2.2.1), pid 2113 user 'joey'
Jul 20 16:13:04 linux gconfd (joey-2113): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
Jul 20 16:13:04 linux gconfd (joey-2113): Resolved address "xml:readonly:/etc/opt/gnome/gconf/preconf/gconf.xml.defaults" to a read-only config source at position 1
Jul 20 16:13:04 linux gconfd (joey-2113): Resolved address "xml:readwrite:/home/joey/.gconf" to a writable config source at position 2
Jul 20 16:13:09 linux kernel: ide-floppy driver 0.99.newide
Jul 20 16:13:09 linux kernel: hdc: attached ide-cdrom driver.
Jul 20 16:13:09 linux kernel: hdc: ATAPI 52X CD-ROM drive, 128kB Cache
Jul 20 16:13:09 linux kernel: Uniform CD-ROM driver Revision: 3.12
Jul 20 16:13:09 linux kernel: cdrom: This disc doesn't have any tracks I recognize!
Jul 20 16:31:54 linux -- MARK --
Jul 20 16:34:31 linux kernel: spurious 8259A interrupt: IRQ7.
Jul 20 16:39:11 linux su: (to root) joey on /dev/pts/1
Jul 20 16:39:11 linux su: pam_unix2: session started for user root, service su
Jul 20 16:42:11 linux su: pam_unix2: session finished for user root, service su
Jul 20 16:46:01 linux pppd[1079]: Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x8089a40
Jul 20 16:46:01 linux pppd[1079]: Couldn't get channel number: Transport endpoint is not connected
Jul 20 16:46:01 linux pppd[1079]: Doing disconnect
Jul 20 16:46:01 linux pppd[1079]: Exit.
Jul 20 16:59:00 linux /USR/SBIN/CRON[6291]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 17:04:08 linux su: (to root) joey on /dev/pts/0
Jul 20 17:04:08 linux su: pam_unix2: session started for user root, service su
Jul 20 17:07:26 linux su: pam_unix2: session finished for user root, service su
Jul 20 17:11:46 linux su: FAILED SU (to root) joey on /dev/pts/0
Jul 20 17:12:10 linux su: (to root) joey on /dev/pts/0
Jul 20 17:12:10 linux su: pam_unix2: session started for user root, service su
Jul 20 17:13:42 linux kernel: Non-volatile memory driver v1.2
Jul 20 17:13:43 linux kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Jul 20 17:13:46 linux last message repeated 3 times
Jul 20 17:13:46 linux kernel: cdrom: open failed.
Jul 20 17:14:27 linux su: pam_unix2: session finished for user root, service su
Jul 20 17:31:54 linux -- MARK --
Jul 20 17:51:54 linux -- MARK --
Jul 20 17:59:00 linux /USR/SBIN/CRON[8631]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 18:00:00 linux /USR/SBIN/CRON[8674]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 20 18:11:54 linux -- MARK --
Jul 20 18:31:54 linux -- MARK --
Jul 20 18:51:54 linux -- MARK --
Jul 20 18:59:00 linux /USR/SBIN/CRON[11376]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 19:11:54 linux -- MARK --
Jul 20 19:31:54 linux -- MARK --
Jul 20 19:51:54 linux -- MARK --
Jul 20 19:59:00 linux /USR/SBIN/CRON[13118]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 20:11:54 linux -- MARK --
Jul 20 20:31:54 linux -- MARK --
Jul 20 20:51:54 linux -- MARK --
Jul 20 20:59:00 linux /USR/SBIN/CRON[13683]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 21:11:54 linux -- MARK --
Jul 20 21:31:54 linux -- MARK --
Jul 20 21:51:54 linux -- MARK --
Jul 20 21:59:00 linux /USR/SBIN/CRON[17066]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 22:00:38 linux modprobe: modprobe: Can't locate module sound-service-1-3
Jul 20 22:00:38 linux modprobe: modprobe: Can't locate module sound-service-2-3
Jul 20 22:00:38 linux modprobe: modprobe: Can't locate module sound-service-3-3
Jul 20 22:01:07 linux modprobe: modprobe: Can't locate module sound-service-1-3
Jul 20 22:01:08 linux modprobe: modprobe: Can't locate module sound-service-2-3
Jul 20 22:01:08 linux modprobe: modprobe: Can't locate module sound-service-3-3
Jul 20 22:02:31 linux modprobe: modprobe: Can't locate module sound-service-1-3
Jul 20 22:02:31 linux modprobe: modprobe: Can't locate module sound-service-2-3
Jul 20 22:02:32 linux modprobe: modprobe: Can't locate module sound-service-3-3
Jul 20 22:07:51 linux modprobe: modprobe: Can't locate module sound-service-1-3
Jul 20 22:07:51 linux modprobe: modprobe: Can't locate module sound-service-2-3
Jul 20 22:07:51 linux modprobe: modprobe: Can't locate module sound-service-3-3
Jul 20 22:31:54 linux -- MARK --
Jul 20 22:51:54 linux -- MARK --
Jul 20 22:59:00 linux /USR/SBIN/CRON[20321]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 23:11:54 linux -- MARK --
Jul 20 23:31:54 linux -- MARK --
Jul 20 23:51:54 linux -- MARK --
Jul 20 23:59:00 linux /USR/SBIN/CRON[23201]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 00:00:00 linux /USR/SBIN/CRON[23219]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 21 00:11:54 linux -- MARK --
Jul 21 00:31:54 linux -- MARK --
Jul 21 00:51:54 linux -- MARK --
Jul 21 00:59:00 linux /USR/SBIN/CRON[25967]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 01:00:00 linux /USR/SBIN/CRON[25997]: (root) CMD (/sbin/evlogmgr -c "severity=DEBUG")
Jul 21 01:11:54 linux -- MARK --
Jul 21 01:31:54 linux -- MARK --
Jul 21 01:51:54 linux -- MARK --
Jul 21 01:59:00 linux /USR/SBIN/CRON[28617]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 02:00:00 linux /USR/SBIN/CRON[28679]: (root) CMD (/sbin/evlogmgr -c 'age > "30d"')
Jul 21 02:11:54 linux -- MARK --
Jul 21 02:31:54 linux -- MARK --
Jul 21 02:51:54 linux -- MARK --
Jul 21 02:59:00 linux /USR/SBIN/CRON[31622]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 02:59:00 linux /USR/SBIN/CRON[31624]: (root) CMD (online_update )
Jul 21 03:11:54 linux -- MARK --
Jul 21 03:31:54 linux -- MARK --
Jul 21 03:51:54 linux -- MARK --
Jul 21 03:59:00 linux /USR/SBIN/CRON[2076]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 04:11:54 linux -- MARK --
Jul 21 04:14:00 linux /USR/SBIN/CRON[2847]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.daily)
Jul 21 04:19:02 linux su: (to nobody) root on none
Jul 21 04:19:02 linux su: pam_unix2: session started for user nobody, service su
Jul 21 04:22:43 linux su: pam_unix2: session finished for user nobody, service su
Jul 21 04:51:54 linux -- MARK --
Jul 21 04:59:00 linux /USR/SBIN/CRON[5529]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 05:11:55 linux -- MARK --
Jul 21 05:31:55 linux -- MARK --
Jul 21 05:51:55 linux -- MARK --
Jul 21 05:59:00 linux /USR/SBIN/CRON[8550]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 06:00:00 linux /USR/SBIN/CRON[8609]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 21 06:11:55 linux -- MARK --
Jul 21 06:31:55 linux -- MARK --
Jul 21 06:51:55 linux -- MARK --
Jul 21 06:59:00 linux /USR/SBIN/CRON[11581]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 07:11:55 linux -- MARK --
Jul 21 07:31:55 linux -- MARK --
Jul 21 07:51:55 linux -- MARK --
Jul 21 07:59:00 linux /USR/SBIN/CRON[14960]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 08:11:55 linux -- MARK --
Jul 21 08:31:55 linux -- MARK --
Jul 21 08:51:55 linux -- MARK --
Jul 21 08:59:00 linux /USR/SBIN/CRON[17978]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 09:11:55 linux -- MARK --
Jul 21 09:31:55 linux -- MARK --
Jul 21 09:51:55 linux -- MARK --
Jul 21 09:59:00 linux /USR/SBIN/CRON[21221]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 10:11:55 linux -- MARK --
Jul 21 10:31:55 linux -- MARK --
Jul 21 10:51:55 linux -- MARK --
Jul 21 10:59:00 linux /USR/SBIN/CRON[24643]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 11:11:55 linux -- MARK --
Jul 21 11:31:55 linux -- MARK --
Jul 21 11:51:55 linux -- MARK --
Jul 21 11:59:00 linux /USR/SBIN/CRON[28347]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 12:00:00 linux /USR/SBIN/CRON[28359]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 21 12:11:55 linux -- MARK --
Jul 21 12:31:55 linux -- MARK --
Jul 21 12:51:55 linux -- MARK --
Jul 21 12:59:00 linux /USR/SBIN/CRON[32064]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 13:11:55 linux -- MARK --
Jul 21 13:31:55 linux -- MARK --
Jul 21 13:51:55 linux -- MARK --
Jul 21 13:59:00 linux /USR/SBIN/CRON[2775]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 14:11:55 linux -- MARK --
Jul 21 14:31:55 linux -- MARK --
Jul 21 14:51:55 linux -- MARK --
Jul 21 14:59:00 linux /USR/SBIN/CRON[5818]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 15:11:55 linux -- MARK --
Jul 21 15:31:55 linux -- MARK --
Jul 21 15:51:55 linux -- MARK --
Jul 21 15:59:00 linux /USR/SBIN/CRON[8937]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 16:11:55 linux -- MARK --
Jul 21 16:31:55 linux -- MARK --
Jul 21 16:51:55 linux -- MARK --
Jul 21 16:59:00 linux /USR/SBIN/CRON[12108]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 17:11:55 linux -- MARK --
Jul 21 17:31:55 linux -- MARK --
Jul 21 17:51:55 linux -- MARK --
Jul 21 17:59:00 linux /USR/SBIN/CRON[15323]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 18:00:00 linux /USR/SBIN/CRON[15361]: (root) CMD ( /usr/lib/sa/sa2 -A #update reports every 6 hour)
Jul 21 18:11:55 linux -- MARK --
Jul 21 18:31:55 linux -- MARK --
Jul 21 18:51:55 linux -- MARK --
Jul 21 18:59:00 linux /USR/SBIN/CRON[18542]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 19:11:55 linux -- MARK --
Jul 21 19:31:55 linux -- MARK --
Jul 21 19:51:55 linux -- MARK --
Jul 21 19:59:00 linux /USR/SBIN/CRON[21885]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 20:11:55 linux -- MARK --
Jul 21 20:31:55 linux -- MARK --
Jul 21 20:51:55 linux -- MARK --
Jul 21 20:59:00 linux /USR/SBIN/CRON[25359]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 21:11:55 linux -- MARK --
Jul 21 21:31:55 linux -- MARK --
Jul 21 21:51:55 linux -- MARK --
Jul 21 21:59:00 linux /USR/SBIN/CRON[28604]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 22:11:55 linux -- MARK --
Jul 21 22:31:55 linux -- MARK --
Jul 21 22:51:55 linux -- MARK --
Jul 21 22:53:54 linux su: (to root) joey on /dev/pts/0
Jul 21 22:53:54 linux su: pam_unix2: session started for user root, service su
Jul 21 22:56:55 linux su: pam_unix2: session finished for user root, service su
Jul 21 22:59:00 linux /USR/SBIN/CRON[31816]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 21 23:00:30 linux modprobe: modprobe: Can't locate module sound-service-1-3
Jul 21 23:00:30 linux modprobe: modprobe: Can't locate module sound-service-2-3
Jul 21 23:00:30 linux modprobe: modprobe: Can't locate module sound-service-3-3
Jul 21 23:01:19 linux su: (to root) joey on /dev/pts/0
Jul 21 23:01:19 linux su: pam_unix2: session started for user root, service su
Jul 21 23:10:19 linux su: pam_unix2: session finished for user root, service su
Jul 21 23:31:55 linux -- MARK --
Jul 21 23:51:55 linux -- MARK --
Jul 21 23:59:00 linux /USR/SBIN/CRON[2446]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)

worker201
guru
guru
Posts: 668
Joined: Sun Jun 13, 2004 6:38 pm
Location: Hawaii

Post by worker201 »

My god, man, I cannot believe your computer even runs! Clearly, your graphics card is having serious issues, especially the 3-d drivers (appgart). Your sound card is also screwy. The only thing I saw that might affect your keyboard is this:
linux modprobe: modprobe: Can't locate module char-major-226
But scratch that, a google search shows that this module is related to your Radeon card.

Is your keyboard usb? Is your mouse usb? Looked like there might have been a problem with that. Mostly, tho, its your graphics card and your sound card.

I hate to tell you this, but you might have to back up everything and reinstall.

One last chance (unless VoidMain says otherwise): post your dmesg and you XF86Config. We might be able to gather more info from those.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

OK, Stats time:

SuSE Linux 9.0 (I think it's kernel is like 2.2.4 (At work again))
AMD Athlon K-6 1.5G
Gigabyte MoBo GA7ZXE via KT133A
*Processor FSB 266
Socket A for AMD Athlon™ /Duron™ 266/200MHz FSB processors
Supports 600MHz ~ 1.5GHz and faster
AUTO detect CPU voltage
*Chipset
VIA VT8363A (KT133A) North bridge
VIA VT82C686B PCI Super-I/O Integrated Peripheral Controller (PSIPC)
AC97 codec
*Memory
3 168-pin DIMM sockets
Supports PC-100 / PC-133 SDRAM and VCM SDRAM
Supports up to 1.5GB DRAM
Supports only 3.3V SDRAM DIMM
*Expansion Slots
1 x AGP slot supports 4X mode & AGP 2.0 compliant
5 x PCI slots support 33MHz & PCI 2.2 compliant
*1/0 ATA100
2 x UDMA 33/66/100 bus master IDE ports on board
1 x FDD, 2 x COM, 1 x LPT, PS/2 keyboard, PS/2 Mouse on board
1 x Joystick, 1 x Line-in, 1 x Line-out, 1 x MIC on board (optional)
2 x USB ports on board
2 x USB ports by cable (optional accessary)
IrDA TX / RX header ready
*Power
ATX power connector
Power-on by LAN, RTC, Modem & switch
Power-off by Windows® 95/98/2000 shut down & switch
*Form Factor
ATX , 4 layer PCB (30.4*18.3cm)
H/W Monitoring
System voltage detect (Vcore,VDD ,Vcc,+12V)
H/W detect & report Power-in voltage, CPU voltage and CMOS battery status
CPU/System fan revoltion & temperature detect
*BIOS
AMI BIOS with enhanced ACPI feature for PC98/Win98/WinMe/Win2000 compliance, Green, PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions
IDE#1~#4, SCSI, LS120, ZIP & CD-ROM bootable
Auto-detect & report system health status
Supports @BIOS™ Live Update
*Other Features
Includes 3 fan power connectors
PC99 connectors
Mosfets cooled by CPU fan
Supports EasyTune III™
*Driver
Gigabyte Windows Utility Manager
VIA 4 in 1 service pack utility
Radeon 7600 LE (All in Wonder)
Predator Sound Card (5.1 digital theatre) (Nvidia Sound Card)
1gig PC133
Creative IDE (generic) CdRom
Generic Floppy
NetGear Fast Ethernet lan card
100 Gb WD Hard drive @ 7200 (almost full of pron)

Keyboard (MS intellitype pro) and Mouse (dell Generic scroll mouse) are Ps2
HP Mx70 monitor

I don't have printer, scanner, cam or mic hooked up yet....I'm taking this slow :D

worker201
guru
guru
Posts: 668
Joined: Sun Jun 13, 2004 6:38 pm
Location: Hawaii

Post by worker201 »

That doesn't help much. :(

I bet your kernel is actually 2.4.x. Should be 2.6.x. Anyway, your Radeon is very screwed up, according to your event log post. Fix that first.
In fact, I wouldn't be surprised if your Radeon being screwy didn't have anything to do with XF86Config being screwy, which might cause some keyboard problems.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

aaaaaaarrrrrrrrrrrrrrrrrrrggggggggggggghhhhhhhhhhhhhhh

where's void when we need him!!!!

XF86config
# /.../
# SaX generated XFree86 config file
# Created on: 2004-07-21T22:55:53+0900.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "dbe"
Load "freetype"
Load "glx"
Load "v4l"
Load "speedo"
Load "extmod"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "AutoRepeat" "300 80"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftinet"
Option "XkbRules" "xfree86"
Option "XkbVariant" "pc104"
EndSection


Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "5"
Option "Buttons" "5"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
DisplaySize 320 240
HorizSync 28-70
Identifier "Monitor[0]"
ModelName "PAVILION MX70"
Option "DPMS"
VendorName "HP"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.15 1280 1312 1448 1648 1024 1025 1028 1059
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
Modeline "1280x1024" 105.15 1280 1312 1448 1648 1024 1025 1028 1059
Modeline "1280x960" 97.68 1280 1352 1488 1696 960 961 964 993
Modeline "1280x960" 116.18 1280 1360 1496 1712 960 961 964 998
Modeline "1152x864" 78.82 1152 1216 1336 1520 864 865 868 894
Modeline "1152x864" 93.90 1152 1224 1344 1536 864 865 868 899
Modeline "1152x864" 109.43 1152 1224 1352 1552 864 865 868 904
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection


Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "Device"
BoardName "Radeon QD"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "ATI"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection



Dmesg
joey@linux:/bin> dmesg
Linux version 2.4.21-231-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Mon Jun 28 15:34:25 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI: RSDP (v000 AMI ) @ 0x000fa550
ACPI: RSDT (v001 AMIINT VIA_K7 00000.00016) @ 0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 00000.00017) @ 0x3fff0030
ACPI: MADT (v001 AMIINT 00000.00009) @ 0x3fff00b0
ACPI: DSDT (v001 VIA VT8371 00000.04096) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda2 vga=0x31a desktop hdd=ide-scsi hddlun=0 splash=silent
ide_setup: hdd=ide-scsi
ide_setup: hddlun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 1000.133 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1966.08 BogoMIPS
Memory: 1032388k/1048512k available (1729k kernel code, 15736k reserved, 605k data, 176k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
00:00:07[C] -> IRQ 5 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
00:00:07[D] -> IRQ 10 Mode 1 Trigger 1
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
00:00:09[A] -> IRQ 9 Mode 1 Trigger 1
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
00:00:09[D] -> IRQ 11 Mode 1 Trigger 1
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 65532
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xd0000000, mapped to 0xf8818000, size 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=24
vesafb: protected mode interface info at c000:45d6
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 148x51
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD1000BB-75CHE0, ATA DISK drive
blk: queue c03e66c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: CREATIVE CD5233E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=12161/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 294k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
reiserfs: replayed 147 transactions in 6 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c377c000
LVM version 1.0.5+(mp-v6d)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
Adding Swap: 1052216k swap-space (priority 42)
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
bootsplash: silent jpeg found.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:0d.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xd400. Vers LK1.1.16
00:01:02:59:72:f1, IRQ 9
product code 4257 rev 00.4 date 05-27-00
Internal config register is 1800000, transceivers 0x8.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 182d.
Enabling bus-master transmits and whole-frame receives.
00:0d.0: scatter/gather enabled. h/w checksums enabled
eth0: no IPv6 routers present
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:07:10 Jun 28 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
mice: PS/2 mouse device common for all mice
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
bootsplash: silent jpeg found.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected Via Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 aperture @ 0xe0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 01:00.0 into 1x mode
Linux video capture interface: v1.00
ide-floppy driver 0.99.newide
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
spurious 8259A interrupt: IRQ7.
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
joey@linux:/bin>

User avatar
Void Main
Site Admin
Site Admin
Posts: 5716
Joined: Wed Jan 08, 2003 5:24 am
Location: Tuxville, USA
Contact:

Post by Void Main »

I really don't know if I can help you much on this one other than the /var/log/messages isn't probably going to help any for this particular thing. I would have to assume it has something to do with the packages you installed in order to get MPlayer to run. Without an exact list of what you installed it's really hard to tell what the problem might be. I don't have a copy of SUSE running anywhere at the moment and I have never seen the problem you are having on any system, ever. :) Sorry but I don't have enough to really have an input at this point.

My guess is that a critical shared library got replaced (probably one of the GTK libraries) that all of the other apps you are now having problems with is linked against. You would have to restore the original packages. You didn't "force" anything or use anything other than RPMs when installing the libraries did you? If so, I'll bet that's where your problem lies.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

Everything was installed from the OEM discs, YAST should have a log somewhere...I'll find it.

There was no forcing either...danget. I can foul a system up good can't I?

I may take workers advise, reinstallation is starting to look good.

worker201
guru
guru
Posts: 668
Joined: Sun Jun 13, 2004 6:38 pm
Location: Hawaii

Post by worker201 »

I didn't see anything in your dmesg about your keyboard, don't know if it should be in there or not. My dmesg for FC2 says:
dmesg wrote: serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Sorry, there isn't much that can be done at this point. Time to back up the pr0n! Definitely try to get your kernel updated, 2.6.x is nice.

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

OK, you're going to love this. Upon further review of my files...there wasn't anything in there that couldn't be redownloaded.

Reinstall here I come...

MPlayer - problems, get the ./configure --enable-gui = g to g
make = fuxor

Edonkey/Overnet - Install functioned flawlessly...gui and Command line in there perfect...log on, username and password not valid...I never set one up...

This is where I stopped...I am bald.

XF86CONFIG:

# /.../
# SaX generated XFree86 config file
# Created on: 2004-07-28T11:48:17+0900.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us,gb"
Option "XkbModel" "microsoftinet"
Option "XkbRules" "xfree86"
Option "XkbVariant" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
DisplaySize 320 240
HorizSync 28-70
Identifier "Monitor[0]"
ModelName "PAVILION MX70"
Option "DPMS"
VendorName "HP"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "1024x768" 97.84 1024 1088 1200 1376 768 769 772 808
Modeline "1024x768" 110.91 1024 1096 1208 1392 768 769 772 813
Modeline "1024x768" 122.97 1024 1096 1208 1392 768 769 772 818
Modeline "1024x768" 136.57 1024 1104 1216 1408 768 769 772 822
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "800x600" 82.55 800 856 944 1088 600 601 604 643
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "Radeon VE"
Driver "radeon"
Identifier "Device[0]"
Option "NoAccel"
Screen 0
Option "Rotate" "off"
VendorName "ATI"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

I think that is what it should look like.

worker201
guru
guru
Posts: 668
Joined: Sun Jun 13, 2004 6:38 pm
Location: Hawaii

Post by worker201 »

Did you really reinstall? Did you tell the Suse installer to format your drives? Because it kinda seems like your programs are finding old files laying around. Running make on mplayer when it has already been made will be useless at best. Try running "make clean", and then "make" , "make install" again.

No clue what Edonkey is, even though you told me once before, but maybe it is finding old info in files that never got replaced upon reinstall? When you reinstall, you gotta format your drives, even if it is just a quick format.

User avatar
Void Main
Site Admin
Site Admin
Posts: 5716
Joined: Wed Jan 08, 2003 5:24 am
Location: Tuxville, USA
Contact:

Post by Void Main »

I don't believe I have ever had to "reinstall" Linux in the 12 years I have been using it. Just lucky I guess. There aren't prebuilt RPMs of MPlayer out there for SUSE somewhere? That's hard to believe.

Maybe something like this:

http://packman.links2linux.org/?action=128

It would be really nice if there were some good apt repositories for SUSE similar to FreshRPMS and Dag but I just don't think they exist (yet).

JoeDude
administrator
administrator
Posts: 355
Joined: Sun Feb 08, 2004 1:41 pm
Location: Sutton Coldfield, UK
Contact:

Post by JoeDude »

Guilty...I fdisk 'ed and fdisk /mbr'd it...

couldn't get the format to work so I hoped fdisk would take care of it...apparentlly not...I'm off to make a new system disk and try again...suggestions?

Post Reply