ISDN RH8.0

Discuss Networking
Post Reply
caveman
programmer
programmer
Posts: 130
Joined: Sun Feb 09, 2003 1:08 pm
Location: Midrand Gauteng, South Africa

ISDN RH8.0

Post by caveman »

Hi.

Running RH8.0 - kernel-2.4.18-24.8.0

Have a us robotics isdn pro ta modem connected via usb.

Now according to the the docs this here machine should work.
But alas - it only works when it feels like it ;) 8)

Connecting a normal serial modem - I hear the thing dial -
go through the speed checks and then connect.

Now with ISDN - one cannot hear anything. And on the KPPP
detail screen it shows "waiting for OK" which it gets and then
"waiting for CONNECT" - now there's only gumpf on the screen.
You know like it connected at the wrong speed! :shock:

Sometimes by fooling around and re-trying a bit - it will
suddenly connect:) - sometimes only after a re-boot.
(I know this doesn't make sense! - but then........ :oops: )

It doesn't really matter at what speed I set the modem -
the problem is the same. It really is if I am missing something
in using an isdn modem and usb.

Any body got'hm some ideas?

Seeing as I don't know the possible questions.
Any questions or more info - let me know and I'll supply.

Regards

old Chinese saying 'Unless we change direction, we are likely to end up where we are going...'

User avatar
Void Main
Site Admin
Site Admin
Posts: 5716
Joined: Wed Jan 08, 2003 5:24 am
Location: Tuxville, USA
Contact:

Post by Void Main »

Hmmm, I did a little digging on Google and on Red Hat bugzilla and didn't really come up with much other than it looks like it should work. One thing I always try when I run into issues like this is a newer kernel. I won't guarantee that it will solve your problem but it could turn out to be worth the effort:

http://voidmain.is-a-geek.net/redhat/re ... ource.html

Post Reply